Kreg Production Stop Adjustable Saw Fence Stop for Miter Saw Stations and Router Tables (KMS7800)
Kreg Production Stop Adjustable Saw Fence Stop for Miter Saw Stations and Router Tables (KMS7800)
Key Features
Overview
Kreg KMS7800 Production Stop is a heavy-duty stop designed for repeatable cutting setups on miter saw stations, router tables, table saws, and miter gauges. This is a production stop designed for setting consistent workpiece length so you can make accurate repeat cuts faster. Model Number: KMS7800. If you are building out a shop fence system and want cleaner workflow for batch cutting, this accessory does the job without a lot of fuss.
The main benefit here is consistency. Once you position the stop and lock it in place, you can bring stock up to the face of the stop and cut repeated parts to the same length. That matters for trim pieces, cabinet parts, shelving components, face frame stock, and any other run where one missed measurement turns into wasted material. Dual lens cursors with hairline indicators let you read the scale from either side of the blade, and both cursors are adjustable so you can fine tune the setup to your saw and your cutting reference.
Kreg built the body from thick aluminum extrusion, which is a smart choice for a shop accessory like this. You get the stiffness needed to resist deflection, but it stays light enough to move and reposition easily. In real use, that means the stop feels solid when material is pushed against it instead of acting like a flimsy add-on. The removable design also makes it easier to clear the fence when you are not running repeat cuts.
Where this production stop earns its keep is day-to-day workflow. On a miter saw station, it turns a basic fence and scale into a repeatable cutting system. On a router table, table saw, or miter gauge setup, it gives you a straightforward way to register parts accurately without building a more complicated custom stop from scratch. The top-drop installation into compatible track saves time because you are not fighting with awkward slide-in assembly every time you change your setup.
Compatibility is a big part of the value. The Kreg KMS7800 Production Stop is designed to work with Kreg Top Trak and Kreg Heavy-Duty Trak, which makes it a practical fit if you are already using Kreg fence components. It is also intended for use across several shop platforms, including miter saw stations, router tables, table saws, and miter gauges, so one accessory can support more than one workstation depending on how your shop is laid out.
This is a smart buy for woodworkers, trim carpenters, cabinet builders, and serious DIY users who care about repeatability more than gimmicks. If you cut a lot of duplicate parts and want a stop that is easy to set, easy to read, and tough enough for regular shop use, this is the kind of accessory that makes your station noticeably more efficient.
Set Length Fast and Cut Repeats With Confidence
When you are cutting multiple parts to the same finished length, a solid stop saves time and keeps your results consistent. Instead of measuring every board, you set the stop once and keep feeding stock.
- Built for repeatable positioning on shop fence systems
- Ideal for batch cutting trim, cabinet parts, and shelving stock
Dial In Accuracy From Either Side
The dual lens cursors with hairline indicators are there for a reason. They let you read and set the stop accurately whether your blade reference or station layout puts you on the left side or right side of the cut.
- Dual cursors support use on either side of the saw blade
- Adjustable cursor setup helps match the stop to your specific saw calibration
Built for Real Shop Use
A stop gets handled constantly, so it needs to be tough and easy to move. This one uses durable aluminum construction and a removable top-drop design that makes station changes quicker.
- Designed to withstand rugged shop use
- Removable and repositionable in compatible track systems
What's in the Box
- (1) Kreg Production Stop
- Mounting hardware
- Owner's manual
Key Specifications
 Model |
KMS7800 |
|---|---|
|
Material |
Aluminum |
 Weight (lbs) |
0.75 lbs |
 Product Height |
7 in |
 Product Length |
5 in |
|
Product Width |
5 in |
|
Cursor Type |
Dual lens cursors with hairline indicators |
|
Installation Style |
Top-drop, removable and repositionable |
Compatibility
Built For
Pro Tip
Before running a batch, cut one test piece and adjust the cursor so the hairline matches your actual blade reference. Once that cursor is dialed in to your station, repeat cuts go a lot faster and you stop chasing tiny measurement errors.
Tool Nut's Take
Why the Kreg KMS7800 Production Stop earns a spot on a serious cutting station
This is one of those small accessories that does a big job if you make repeat cuts on a regular basis.
- Who it's for: Woodworkers, trim guys, cabinet builders, and serious DIY users setting up a miter saw station or fence system for repeatable cuts.
- Why it stands out: The dual adjustable cursors and solid aluminum body make it more than a basic stop block. It is accurate, easy to read, and built for repeated use.
- Worth knowing: This is best thought of as part of a system. To get the full benefit, you need a compatible Kreg track setup already planned into your station.
Common Questions
- What is the Kreg KMS7800 Production Stop used for? It is used to set a repeatable stop position for cutting parts to the same length on compatible shop fence and track setups.
- Does it work on both sides of the blade? Yes. It features dual lens cursors with hairline indicators for use on either side of the saw blade.
- What track does it fit? It is designed for Kreg Top Trak and Kreg Heavy-Duty Trak.
- Can it be used only on a miter saw station? No. It is also intended for router tables, table saw setups, and miter gauges when used with the right track and fence arrangement.