{"title":"build-your-own-custom-mft-table","description":null,"products":[{"product_id":"dashboard-mft-track-star-rip-outboard-support-platform-2-pack-ts0001-nnolin","title":"Dashboard MFT Track Star Rip \u0026 Outboard Support Platform, 2-Pack (TS0001)","description":"\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/o8s110PfsWI?si=ILAq_LJIhaxnnxwN\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen\u003e\u003c\/iframe\u003e\u003ch2\u003eTrack Saw Rip \u0026amp; Outboard Support Platform for MFT Benches\u003c\/h2\u003e\u003cp\u003eThe Track Star is the expansion platform of the Dash-Board system, supporting full-sheet rips, outboard fence mounting, parallel guides, and offcuts well beyond the bench footprint. It turns a stationary Festool MFT or Dash-Board into a configurable track saw rip-and-crosscut station that grows with your work.\u003c\/p\u003e\u003ch3\u003eVersatile. Unique. Uniquely versatile.\u003c\/h3\u003e\u003cp\u003eThe Track Star started as a solution for supporting offcuts and improving access to parts when cutting scribes. Then it became the platform for full-sheet rips. Then for parallel guide mounting. Then for outboard fence support. Then for clamping outside the bench footprint. Today, the Track Star is the central expansion accessory of the Dash-Board system, the part that turns a stationary bench into a configurable rip and crosscut platform that grows with your work.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFull-sheet rips with parallel guide registration\u003c\/li\u003e\n\u003cli\u003eCrosscut support outside the bench footprint\u003c\/li\u003e\n\u003cli\u003eOffcut support and improved access for scribing\u003c\/li\u003e\n\u003cli\u003eExpands fence mounting, clamping, and tool rest options\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/Track_Star_1_b06c0d87-12a3-4a47-b4ce-01849f32de12.png?v=1783439494\" alt=\"Track Star (set of 2)\"\u003e\u003c\/p\u003e\u003ch3\u003eMounts to virtually any bench.\u003c\/h3\u003e\u003cp\u003eTrack Stars are compatible with the Dash-Board bench, ShortCut bench, Festool MFT3 and 1080, Benchdogs Ultra MFT, Kreg ACS, TrackTubes, T-slot extrusion tables made from imperial 10 series and larger, and wood-frame tables with standard T-track. When paired with SpiRail Dogs, Track Stars work with all major track saw brands. Tool-free installation lets you reposition or remove them in seconds.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDash-Board, ShortCut, Festool MFT3 and 1080\u003c\/li\u003e\n\u003cli\u003eBenchdogs Ultra MFT, Kreg ACS, TrackTubes\u003c\/li\u003e\n\u003cli\u003eT-slot extrusion tables (imperial 10 series and larger)\u003c\/li\u003e\n\u003cli\u003eWood-frame tables with standard T-track\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/Track_Star_4_90bfd5e5-6b5a-46a4-8eed-5a5bdf1d6908.jpg?v=1783439491\" alt=\"Track Star (set of 2)\"\u003e\u003c\/p\u003e\u003ch3\u003eThree mounting heights. 37mm of fine tuning.\u003c\/h3\u003e\u003cp\u003eTrack Stars are height-adjustable to match a wide range of workbench assemblies. Each Track Star has three sets of mounting holes and 1.437\" (37mm) of fine vertical adjustment within each position, controlled by tool-free all-metal knobs. This range allows the Track Star surface to sit flush with the top of the Dash-Board, ShortCut, MFT\/3 and 1080, Kreg ACS, Benchdogs Ultra MFT, and DIY workbenches built within range.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e8\" (202mm) long, 5.75\" (145mm) deep\u003c\/li\u003e\n\u003cli\u003eThree sets of mounting holes for common bench heights\u003c\/li\u003e\n\u003cli\u003e1.437\" (37mm) of fine adjustment within each position\u003c\/li\u003e\n\u003cli\u003eAll-metal knobs, tool-free installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/track-star-max-height_6a7a97e4-10ee-46c5-9fbb-81f1d3218391.jpg?v=1783439493\" alt=\"Track Star (set of 2)\"\u003e\u003c\/p\u003e\u003ch3\u003eThe center of the accessory system.\u003c\/h3\u003e\u003cp\u003eTrack Stars carry the full Dash-Board accessory system out past the edge of your bench. The 20mm holes and slots accept SpiRail Dogs for guide rail registration. Parallel Guides anchor directly into the holes. The F1 and F2 Surface Mount Fences mount on top. The Wingman extends your rail reach. Standard Bench Dogs, ExpanDogs, or any third-party 20mm-compatible workholding works in the same holes. This is what unlocks full-sheet rips, repeatable parallel cuts, and crosscuts past the bench edge.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e20mm holes and slots for any compatible accessory\u003c\/li\u003e\n\u003cli\u003eWorks with SpiRail Dogs for any guide rail brand\u003c\/li\u003e\n\u003cli\u003eMounts F1 and F2 Surface Mount Fences directly\u003c\/li\u003e\n\u003cli\u003eAnchors Parallel Guides and supports the Wingman\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/parallel-guide-on-track-star_28aaeb32-b88b-46ab-9437-4702e47289dd.jpg?v=1783439493\" alt=\"Track Star (set of 2)\"\u003e\u003c\/p\u003e\u003ch3\u003eWhat’s in the box:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2 Track Stars\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eMaterials\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMachined, anodized aluminum\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLength: 8” (202mm)\u003c\/li\u003e\n\u003cli\u003eDepth: 5.75” (145mm)\u003c\/li\u003e\n\u003cli\u003eHeight adjustment: 1.437” (37mm), at each of three mounting heights\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKey Functions:\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCrosscuts\u003c\/li\u003e\n\u003cli\u003eRips\u003c\/li\u003e\n\u003cli\u003eOffcut support\u003c\/li\u003e\n\u003cli\u003eExpands Parallel Guide and fence mounting\u003c\/li\u003e\n\u003cli\u003eClamping surface\u003c\/li\u003e\n\u003cli\u003eImproved access during routing, sanding, joining, scribing\u003c\/li\u003e\n\u003cli\u003eTool rest\/clamp rack\u003c\/li\u003e\n\u003cli\u003eUse your imagination!\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKey Features:\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeight-adjustable for compatibility with various work tables\u003c\/li\u003e\n\u003cli\u003eSolid anodized aluminum construction\u003c\/li\u003e\n\u003cli\u003e20mm holes and slots for Bench Dogs, ExpanDogs, and SpiRail Dogs\u003c\/li\u003e\n\u003cli\u003eComfortable all-metal knobs\u003c\/li\u003e\n\u003cli\u003eCompatible with SpiRail Dogs, Parallel Guides, Surface-Mount Fences, and the Wingman\u003c\/li\u003e\n\u003cli\u003eMounting hardware compatible with virtually all benches.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Safety:\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eBe mindful of pinch points\u003c\/li\u003e\n\u003cli\u003eSecure all hardware before use to avoid accidents or injury.\u003c\/li\u003e\n\u003cli\u003eUse appropriate lifting form to avoid injury\u003c\/li\u003e\n\u003cli\u003eKeep out of reach of children\u003c\/li\u003e\n\u003cli\u003eWorkbenches and Outriggers not intended as standing platforms\u003c\/li\u003e\n\u003cli\u003eFor safest operation please keep static loads below 300 lbs or 136 kg\u003c\/li\u003e\n\u003cli\u003eDisassembly or product alterations are not recommended\u003c\/li\u003e\n\u003cli\u003eDo not use products for uses other than intended​\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is a Track Star and what does it do?\u003c\/strong\u003e A Track Star is a side-mounted aluminum platform that slides into the side of a Dash-Board workbench, Festool MFT3, or any T-slot\/T-track frame to extend the work area beyond the bench surface. The Track Stars give parallel guides, surface-mount fences, and guide rails a place to register outboard of the bench, enabling full sheet rips and long crosscuts. Each Track Star measures 8\" long by 5.75\" deep with three mounting heights and 1.437\" (37mm) of vertical adjustment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat workbenches and track saws are Track Stars compatible with?\u003c\/strong\u003e Track Stars are compatible with the Dash-Board bench, ShortCut bench, Festool MFT3 and 1080, Benchdogs Ultra MFT, Kreg ACS, TrackTubes, T-slot extrusion tables made from imperial 10 series and larger, and wood-frame tables with standard T-track. When paired with SpiRail Dogs, Track Stars work with all major track saw brands, including Festool, Makita, Bosch, Mafell, DeWalt, Metabo, Milwaukee, WEN, and Grizzly. Tool-free installation lets you reposition or remove them in seconds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow do you rip full sheets of plywood with Track Stars?\u003c\/strong\u003e To rip full sheets of plywood with Track Stars, mount one Track Star on each side of the bench, install a SpiRail Dog into the bottom slot at each end of your guide rail, and drop the rail into corresponding slots on each Track Star. Adding Parallel Guides and the Rip Gauge enables accurate, repeatable rip dimensions on both sides of the blade. Verified buyers describe Track Stars as the key accessory that allowed them to retire their table saw.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAre Track Stars adjustable for different bench frames?\u003c\/strong\u003e Track Stars are height-adjustable to match a wide range of workbench assemblies. Each Track Star has three sets of mounting holes and 1.437\" (37mm) of fine vertical adjustment within each position, controlled by tool-free all-metal knobs. This range allows the Track Star surface to sit flush with the surface of the Dash-Board, ShortCut, MFT\/3 and 1080, Kreg ACS, Benchdogs Ultra MFT, and DIY workbenches built within range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat accessories work with the Track Star?\u003c\/strong\u003e The Track Star works with the full Dash-Board accessory system, including SpiRail Dogs, Parallel Guides, the F1 and F2 Surface-Mount Fences, and the Wingman. The 20mm holes and slots also accept standard Bench Dogs, ExpanDogs, or any third-party 20mm-compatible workholding accessories. This compatibility makes Track Stars the central expansion accessory of the Dash-Board system, turning a stationary bench into a configurable rip and crosscut platform.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dashboard PWS","offers":[{"title":"Default Title","offer_id":43569523982384,"sku":"TS0001-DASH","price":95.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4876\/8304\/files\/ra29uf2p1v1z_c17efd4a-157d-429e-ab67-39d5a147a4a1.jpg?v=1788561550"},{"product_id":"dashboard-mft-universal-setup-blocks-for-guide-rail-positioning-2-pack-usb001-5vp18i","title":"Dashboard MFT Universal Setup Blocks for Guide Rail Positioning, 2-Pack (USB001)","description":"\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/6MxwQkgcVzI?si=BuC_QaEZkX9Hrvm-\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen\u003e\u003c\/iframe\u003e\u003ch2\u003eGuide Rail Positioning Blocks for Long Track Saw Rips\u003c\/h2\u003e\u003cp\u003eUniversal Setup Blocks position your guide rail precisely for long rips on Track Stars and Outriggers, so you cut the material and the air beneath it, never the bench. They are the registration blocks that make safe, repeatable off-bench track saw rips possible on any Dash-Board or MFT-style setup.\u003c\/p\u003e\u003ch3\u003eRequired for Track Star and Outrigger long rips.\u003c\/h3\u003e\u003cp\u003eUniversal Setup Blocks are integral to the Dash-Board long rip configuration that uses Track Stars or Outriggers to locate the cut line off the edge of the bench. The Setup Blocks register identically on Track Stars and Outriggers to help you position a guide rail so you can safely cut the material and the air beneath it, never the bench, Outriggers, or Track Stars. This is why a pair of USBs ships standard with the Guide Rail Bracket Set, Pro Bundle, Platinum Bundle, and Core MFT Bundle.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRequired for Track Star long rip configurations\u003c\/li\u003e\n\u003cli\u003eRequired for Outrigger long rip configurations\u003c\/li\u003e\n\u003cli\u003eIncluded in the Guide Rail Bracket Set\u003c\/li\u003e\n\u003cli\u003eIncluded in Pro, Platinum, and Core MFT Bundles\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/f2-tongue_ccb2876a-4193-4246-a664-621ca7e4ebf7.jpg?v=1783439493\" alt=\"Universal Setup Block (set of 2)\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/coremft-long-rip_f67e5f08-c79f-43ea-bc4f-8e619b6135a7.jpg?v=1783439493\" alt=\"Universal Setup Block (set of 2)\"\u003e\u003c\/p\u003e\u003ch3\u003eWhat’s in the box:\u003c\/h3\u003e\u003cp\u003e2 Universal Setup Blocks​\u003c\/p\u003e\u003ch3\u003eFeatures:\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eUse with Dash-Board Bench Dogs on any table with 20mm holes or Dash-Board Outriggers\u003c\/li\u003e\n\u003cli\u003eRepeatable cut line positioning to protect table top\u003c\/li\u003e\n\u003cli\u003eIntegral for use with Track Stars and Outriggers for our long rip configuration\u003c\/li\u003e\n\u003cli\u003eSold in pairs, works with our Bench Dogs (sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility:\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eWorks with ALL track saws\/guide rails:\u003c\/b\u003e Festool\/Makita-style rails · Bosch\/Mafell rails · DeWalt\/Metabo rails · Powertec · Milwaukee · WEN · Grizzly \u003c\/p\u003e\u003cp\u003e​\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWorks with these workbenches: \u003c\/b\u003eAll workbenches with 20mm holes \u003c\/p\u003e\u003cp\u003e​\u003c\/p\u003e\u003ch4\u003eProduct Safety:\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eBe mindful of pinch points\u003c\/li\u003e\n\u003cli\u003eSecure all hardware before use to avoid accidents or injury.\u003c\/li\u003e\n\u003cli\u003eUse appropriate lifting form to avoid injury\u003c\/li\u003e\n\u003cli\u003eKeep out of reach of children\u003c\/li\u003e\n\u003cli\u003eWorkbenches and Outriggers not intended as standing platforms\u003c\/li\u003e\n\u003cli\u003eFor safest operation please keep static loads below 300 lbs or 136 kg\u003c\/li\u003e\n\u003cli\u003eDisassembly or product alterations are not recommended\u003c\/li\u003e\n\u003cli\u003eDo not use products for uses other than intended\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e​\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat does the Universal Setup Block do?\u003c\/strong\u003e The Universal Setup Block positions your track saw guide rail accurately on your bench top, registering the rail at the same cut line every time without measuring or marking. The Setup Blocks drop into 20mm bench holes and provide a fixed registration surface that the guide rail rests against. This gives you a repeatable cut line across hundreds of cuts and protects your bench top by concentrating blade contact in a single consistent strip rather than spreading wear across the bench.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo I need the Universal Setup Block if I already own a Dash-Board bundle?\u003c\/strong\u003e Probably not — if you bought the Guide Rail Bracket Set, the Pro Bundle, the Platinum Bundle, or the Core MFT Bundle. Each of these includes 2 Universal Setup Blocks as standard equipment. If you bought the Dash-Board Workbench alone, the ShortCut alone, or are upgrading a non-Dash-Board bench à la carte, you'll likely want a pair of Setup Blocks to enable repeatable rail placement. Some owners also order extra pairs for multi-setup workflows.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat workbenches is the Universal Setup Block compatible with?\u003c\/strong\u003e The Universal Setup Block is compatible with any workbench that has a 20mm hole grid on 96mm centers, including the Dash-Board bench, ShortCut bench, Festool MFT3 and 1080, Benchdogs Ultra MFT, Kreg ACS, and DIY MFT-style benches built to standard MFT specifications. The Setup Blocks drop into 20mm holes without any modification or proprietary mounting hardware — they're a true universal accessory for the MFT-style workbench ecosystem.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAre the Universal Setup Blocks compatible with my track saw?\u003c\/strong\u003e Yes, the Universal Setup Block is compatible with all major track saw and guide rail brands, including Festool, Makita-style rails, Bosch, Mafell, DeWalt, Metabo, Powertec, Milwaukee, WEN, and Grizzly. The Setup Blocks register against the bottom edge of the guide rail rather than any rail-specific feature, so they work with whatever rail you already own.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included with the Universal Setup Block?\u003c\/strong\u003e The Universal Setup Block is sold in pairs — 2 Setup Blocks per order. No additional hardware is required to use them; they drop directly into 20mm bench holes. For full functionality, pair the Setup Blocks with Bench Dogs to provide rail registration against the back of the rail — this is the standard configuration that ships with the Guide Rail Bracket Set and most Dash-Board bundles. Bench Dogs are sold separately if not already in your kit.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dashboard PWS","offers":[{"title":"Default Title","offer_id":43569524178992,"sku":"USB001-DASH","price":8.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4876\/8304\/files\/965cuy7rsfmp_b3416e6e-4574-4bc5-9ae1-89018e68232f.jpg?v=1788561554"},{"product_id":"dashboard-mft-pro-accessories-bundle-for-track-saw-workbenches-pro001-0wdeiy","title":"Dashboard MFT Pro Accessories Bundle for Track Saw Workbenches (PRO001)","description":"\u003ch2\u003eComplete Festool MFT Upgrade \u0026amp; Track Saw Workbench System\u003c\/h2\u003e\n\u003cp\u003eThe Pro Accessories Bundle is the complete Dash-Board system: every crosscut, rip, fence, and workholding accessory needed to turn a Festool MFT\/3 or any 20mm-grid bench into a full track saw workstation. It is the most direct path for serious Festool, Makita, and Bosch track saw owners to replace table-saw and panel-saw workflows.\u003c\/p\u003e\n\u003ch3\u003eEverything you need to unlock the bench.\u003c\/h3\u003e\n\u003cp\u003eThe Pro Accessories Bundle is the kit Rob designed to transform a Dash-Board or ShortCut bench from a worktable into a unified woodworking system. Every key function of the bench, from crosscutting to ripping, dimensioning, miter cuts, vertical work, and batch processing, is unlocked by the components in this bundle. The Guide Rail Bracket Set squares your rail. The Track Stars extend your platform. The F1 and F2 fences set your references. The Rip Gauge and Parallel Guides handle dimensional rips. The Wingman pushes capacity past the bench edge. This is the system that makes the bench the foundation of your shop.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGuide Rail Bracket Set for square crosscuts\u003c\/li\u003e\n\u003cli\u003e6 Track Stars for extended cutting and ripping platforms\u003c\/li\u003e\n\u003cli\u003eF1 and F2 Fences for repeatable reference edges\u003c\/li\u003e\n\u003cli\u003eRip Gauge, Parallel Guides, and Wingman for dimensional work\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/pro-bundle-bench-system-gray-bg_4929054d-a8f2-4cd4-bfb9-cbd13165cc98.png?v=1783439495\" alt=\"Pro Accessories Bundle\"\u003e\u003c\/p\u003e\n\u003ch3\u003eA better value than buying the pieces separately.\u003c\/h3\u003e\n\u003cp\u003eBuying these components separately costs more than ordering them together. Choose the bundle and you'll pay less than the à la carte total, a built-in saving without compromise on quality, components, or fit. Same Guide Rail Brackets. Same Track Stars. Same F1 and F2 fences. Same machined parts and anodized aluminum that ship in every individual product order. The bundle exists to give buyers who know they want the primary system the best value in one order.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCosts less than buying the components separately\u003c\/li\u003e\n\u003cli\u003eOne bundle, one checkout\u003c\/li\u003e\n\u003cli\u003eBuilt-in savings versus à la carte\u003c\/li\u003e\n\u003cli\u003eSame components, same quality, no additions needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/pro-bundle-bench-rail-clamps-perspective_c69bf61f-9b69-4884-b461-9af4d7aa1c0b.png?v=1783439496\" alt=\"Pro Accessories Bundle\"\u003e\u003c\/p\u003e\n\u003ch3\u003e33 ⅝-inch crosscuts. The bench-only limit.\u003c\/h3\u003e\n\u003cp\u003eThe Pro Bundle handles crosscuts up to 33⅝\" (854mm) wide, which is the maximum capacity of the Dash-Board bench when set up with this configuration. That covers nearly every cabinet door, drawer front, casework side, and dimensional lumber crosscut a woodworker makes day to day. For full-sheet crosscuts (cuts wider than 33⅝\"), the bench needs the Outrigger Bundle to extend the platform further, which is the difference between the Pro Bundle and the Platinum Bundle. If your work rarely involves cutting 4-foot-wide sheet goods at once, Pro is the right level. If you process full sheets regularly, step up to Platinum.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e33⅝\" (854mm) maximum crosscut width\u003c\/li\u003e\n\u003cli\u003eCovers most cabinet, drawer, and casework dimensions\u003c\/li\u003e\n\u003cli\u003eBench-only platform, no Outrigger Bundle needed\u003c\/li\u003e\n\u003cli\u003eStep up to Platinum for full-sheet crosscut capacity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/GRB_Action_Shot_70b2b04e-3c51-4cd6-be2c-da217f721a87.jpg?v=1783439491\" alt=\"Pro Accessories Bundle\"\u003e\u003c\/p\u003e\n\u003ch3\u003eThe right starting point for the serious workflow.\u003c\/h3\u003e\n\u003cp\u003eThe Pro Bundle is built for woodworkers and trade professionals who want the primary Dash-Board system without committing to the full-sheet processing setup that the Outrigger Bundle adds. Finish carpenters doing on-site batch work. Cabinet makers building doors and drawer fronts. Serious hobbyists building furniture, kitchens, and casework where most cuts fall within 33⅝\". If you're new to the Dash-Board system, this is the bundle that gets you the core capability in one order without the Outrigger components you may not need. If full-sheet rips are part of your weekly workflow, step up to Platinum.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFinish carpenters with on-site batch work needs\u003c\/li\u003e\n\u003cli\u003eCabinet makers building doors, drawers, and casework\u003c\/li\u003e\n\u003cli\u003eSerious hobbyists building furniture and kitchens\u003c\/li\u003e\n\u003cli\u003eAnyone who wants the primary system without full-sheet capacity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/Guide-Rail-Bracket-Set-9_bbe658ed-2149-4b7c-975c-e0d0f163fc96.jpg?v=1783439491\" alt=\"Pro Accessories Bundle\"\u003e\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 Guide Rail Bracket Set\u003c\/li\u003e\n\u003cli\u003e8 Bench Dogs (4 Tall - 1” and 4 Short - 3\/16\")\u003c\/li\u003e\n\u003cli\u003e6 Track Stars\u003c\/li\u003e\n\u003cli\u003e1 F2 Fence - 54.75” (1390mm)\u003c\/li\u003e\n\u003cli\u003e1 F1 Fence - 30” (762mm)\u003c\/li\u003e\n\u003cli\u003e2 Reversible Flip Stops\u003c\/li\u003e\n\u003cli\u003e1 pair SpiRail Dogs\u003c\/li\u003e\n\u003cli\u003e2 Door \u0026amp; Panel Supports (only compatible with Dash-Board benches)\u003c\/li\u003e\n\u003cli\u003e2 Parallel Guides\u003c\/li\u003e\n\u003cli\u003e1 Rip Gauge\u003c\/li\u003e\n\u003cli\u003e1 Wingman\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Functions:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e33 ⅝” crosscuts (854 mm)\u003c\/li\u003e\n\u003cli\u003eFull sheet rips\u003c\/li\u003e\n\u003cli\u003eUnrivaled vertical work holding\u003c\/li\u003e\n\u003cli\u003eMiter cut capability\u003c\/li\u003e\n\u003cli\u003eEfficient batch work\u003c\/li\u003e\n\u003cli\u003eOffcut support\u003c\/li\u003e\n\u003cli\u003eShort workpiece control\u003c\/li\u003e\n\u003cli\u003eSet dimensions or replicate parts with a physical template\u003c\/li\u003e\n\u003cli\u003eMaterial management with multiple stop options\u003c\/li\u003e\n\u003cli\u003ePosition, clamp, and assemble parts with ease \u003c\/li\u003e\n\u003cli\u003eAccurate and narrow cuts with your track saw\u003c\/li\u003e\n\u003cli\u003eRip and install edge banding\u003c\/li\u003e\n\u003cli\u003eSolid foundation for confidence with of all aspects of woodworking and cabinetry\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe Dash-Board Workbench\u003c\/li\u003e\n\u003cli\u003eThe Dash-Board ShortCut Workbench\u003c\/li\u003e\n\u003cli\u003eThe MFT3 \u0026amp; 1080, Benchdogs Ultra MFT, TrackTubes, and DIY benches with 20mm holes and T-slot extrusion (minimum 8mm slot)\u003c\/li\u003e\n\u003cli\u003eDoor and Panel Support is ONLY \u003ci\u003edirectly\u003c\/i\u003e compatible with Dash-Board workbenches\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"color: transparent!important;\"\u003e \u003c\/p\u003e\n\u003ch4\u003e\u003cb\u003eProduct Safety:\u003c\/b\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBe mindful of pinch points\u003c\/li\u003e\n\u003cli\u003eSecure all hardware before use to avoid accidents or injury.\u003c\/li\u003e\n\u003cli\u003eUse appropriate lifting form to avoid injury\u003c\/li\u003e\n\u003cli\u003eKeep out of reach of children\u003c\/li\u003e\n\u003cli\u003eWorkbenches and Outriggers not intended as standing platforms\u003c\/li\u003e\n\u003cli\u003eFor safest operation please keep static loads below 300 lbs or 136 kg\u003c\/li\u003e\n\u003cli\u003eDisassembly or product alterations are not recommended\u003c\/li\u003e\n\u003cli\u003eDo not use products for uses other than intended\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the Pro Accessories Bundle?\u003c\/strong\u003e The Pro Accessories Bundle includes the complete core Dash-Board accessory system: 1 Guide Rail Bracket Set (with 2 Universal Setup Blocks, 4 Medium Bench Dogs, and 1 SpiRail Dog), 6 Track Stars, 1 F2 Fence (54.75\"), 1 F1 Fence (30\"), 2 Reversible Flip Stops, 1 pair of SpiRail Dogs, 2 Door and Panel Supports, 2 Parallel Guides, 1 Rip Gauge, 1 Wingman, and 8 Bench Dogs (4 Tall, 4 Short). See the full specs section for the complete component list.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the difference between the Pro Bundle and the Platinum Bundle?\u003c\/strong\u003e The Pro Accessories Bundle includes the core Dash-Board accessory system, the Platinum Bundle adds the complete Outrigger Bundle on top of it. The practical difference is crosscut capacity, the Pro Bundle handles crosscuts up to 33⅝\" wide, while the Platinum Bundle (with the Outrigger Bundle additions) enables full-sheet crosscuts and rips on standard 4x8 sheet goods. Choose Pro if your work rarely involves 4-foot-wide crosscuts. Choose Platinum if full-sheet processing is part of your weekly workflow.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes the Pro Bundle include a workbench?\u003c\/strong\u003e No, the Pro Accessories Bundle does not include a workbench. It is an accessory bundle only, designed to be paired with a Dash-Board Workbench or ShortCut Workbench purchased separately. The bundle is compatible with both Dash-Board benches but is not designed for third-party benches because it includes the Door and Panel Supports, which require proprietary Dash-Board mounting points.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow much does the Pro Bundle save versus buying components separately?\u003c\/strong\u003e The Pro Accessories Bundle costs less than buying the same components à la carte. That savings comes with no quality compromise, no missing components, and no substituted parts, every item in the bundle is identical to what ships in the individual product orders.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCan I add the Outrigger Bundle later to upgrade to Platinum capability?\u003c\/strong\u003e Yes, you can add the Outrigger Bundle to the Pro Bundle later to reach the same configuration as the Platinum Accessories Bundle. Many Dash-Board owners start with the Pro Bundle, work with it for a while, and add the Outrigger Bundle when their workflow shifts toward full-sheet processing. The combined cost of Pro Bundle plus Outrigger Bundle is slightly higher than ordering the Platinum Bundle at once, so if you know you'll need both, the Platinum Bundle is the better value.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dashboard PWS","offers":[{"title":"Default Title","offer_id":43569524244528,"sku":"PRO001-DS","price":741.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4876\/8304\/files\/4gwp1rs6ft62_4cfd2d84-d0dd-494c-acca-92d87a7f706e.jpg?v=1788561554"},{"product_id":"dashboard-mft-reversible-flip-stop-for-repeatable-crosscut-lengths-fs0001-y6lrod","title":"Dashboard MFT Reversible Flip Stop for Repeatable Crosscut Lengths (FS0001)","description":"\u003ch2\u003eRepeatable Crosscut Stop for Track Saw Fences\u003c\/h2\u003e\u003cp\u003eThe Reversible Flip Stop adds repeatable length stops to your Dash-Board or Festool MFT crosscut fence, so every part comes off the track saw identical. Flip it down to register a cut, flip it up to clear long stock, the simplest way to batch repeat cuts on an MFT-style bench.\u003c\/p\u003e\u003ch3\u003eSet it once. Cut the same length all day.\u003c\/h3\u003e\u003cp\u003eThe Reversible Flip Stop is what turns the F1 and F2 Surface Mount Fences into a true repeat-cut system. Position the stop at your desired length, lock it down, and run identical parts back to back without measuring between each cut. The solid, rigid design holds position under repeated workpiece contact, so the dimension doesn't drift over the course of a batch. Flip it up out of the way when you need to cut longer parts, then flip it back down without losing the setting.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSets repeatable lengths on the F1 and F2 fences\u003c\/li\u003e\n\u003cli\u003eSolid, rigid design holds its setting under load\u003c\/li\u003e\n\u003cli\u003eFlips up out of the way for longer cuts\u003c\/li\u003e\n\u003cli\u003eSmooth, comfortable operation\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/Reversible_Flip_Stop_2_2dae255c-7557-4459-8063-cca037a0610f.jpg?v=1783439491\" alt=\"Reversible Flip Stop\"\u003e\u003c\/p\u003e\u003ch3\u003eTwo sides. More placement options.\u003c\/h3\u003e\u003cp\u003eThe Reversible Flip Stops symmetrical design allows it to be reversed depending on the orientation of your workpiece and where you need the stop face to register. This versatility means one Flip Stop handles workflows that other stops can't, and it gives you more flexibility when mixing the Flip Stop with the F1, the F2. Many Dash-Board owners run multiple Flip Stops to allow for different cut lengths set at the same time. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSymmetrical design for more placement orientations\u003c\/li\u003e\n\u003cli\u003eWorks on the F1 and F2 fences\u003c\/li\u003e\n\u003cli\u003eSmooth flip mechanism, comfortable in the hand\u003c\/li\u003e\n\u003cli\u003eStack multiple stops for multiple cut lengths\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/Reversible_Flip_Stop_Thumbnail_a467770a-0a01-4f08-a27d-d24e68a8cbfc.png?v=1783439493\" alt=\"Reversible Flip Stop\"\u003e\u003c\/p\u003e\u003ch3\u003eBuilt for Dash-Board Fences.\u003c\/h3\u003e\u003cp\u003eThe Reversible Flip Stop is designed exclusively for the Gen 2 Dash-Board Surface Mount Fences (F1 and F2). It is not compatible with Gen 1 fences or with other third-party fence systems. If you're running the current Dash-Board fence system, the Flip Stop slides on and locks down with a single comfortable knob. If you're not sure which generation you have, check your fence purchase or contact us before adding the Flip Stop.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eExclusively for Gen 2 F1 and F2 Surface Mount Fences\u003c\/li\u003e\n\u003cli\u003eNot compatible with Gen 1 fences or third-party systems\u003c\/li\u003e\n\u003cli\u003eTool-free attachment and adjustment\u003c\/li\u003e\n\u003cli\u003eSingle locking knob for fast setting\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/Bench_Closeup_1_0b1d326f-c80e-4cdd-be45-4f90bd063c3f.png?v=1783439496\" alt=\"Reversible Flip Stop\"\u003e\u003c\/p\u003e\u003ch3\u003eThe piece that makes batch work fast.\u003c\/h3\u003e\u003cp\u003eA fence without a flip stop is just a backstop. A fence with a flip stop is a production tool. The Reversible Flip Stop is what cabinet makers, finish carpenters, and woodworkers cutting parts in batches add to unlock the real production speed of the Dash-Board fence system. It pairs with the Rip Gauge for kerf-corrected stop setting oneither side of the blade, with fences mounted on Track Stars, and with the Guide Rail Bracket Set for square crosscuts every time.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRequired for repeatable production work\u003c\/li\u003e\n\u003cli\u003ePairs with the Rip Gauge \u003c\/li\u003e\n\u003cli\u003eWorks with fences mounted on Track Stars \u003c\/li\u003e\n\u003cli\u003eCompletes the Guide Rail Bracket Set workflow\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/F2Fence4_32bb9901-3ae2-42f6-98f7-4a9abe84a368.jpg?v=1783439491\" alt=\"Reversible Flip Stop\"\u003e\u003c\/p\u003e\u003ch3\u003eWhat’s in the box:\u003c\/h3\u003e\u003cp\u003e1 Reversible Flip Stop​\u003c\/p\u003e\u003ch3\u003eBuild:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eSolid, rigid construction, smooth flip mechanism, single comfortable locking knob, two-sided reversible design\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eCompatibility — Fences\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eF2 Surface Mount Fence and F1 Surface Mount Fence\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eCompatibility — Workbenches\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eAny workbench compatible with the F1 and F2 Fences, including: Dash-Board bench, ShortCut bench, Festool MFT3 and 1080, Benchdogs Ultra MFT, Kreg ACS, and DIY MFT-style benches\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eCritical Compatibility Note\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eCompatible \u003cb\u003eONLY \u003c\/b\u003ewith Gen 2 Dash-Board Surface Mount Fences. Will not work with Gen 1 fences or other third-party fence systems. Verify your fence generation before purchase.\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003e\u003cb\u003eProduct Safety:\u003c\/b\u003e\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eBe mindful of pinch points\u003c\/li\u003e\n\u003cli\u003eSecure all hardware before use to avoid accidents or injury.\u003c\/li\u003e\n\u003cli\u003eUse appropriate lifting form to avoid injury\u003c\/li\u003e\n\u003cli\u003eKeep out of reach of children\u003c\/li\u003e\n\u003cli\u003eWorkbenches and Outriggers not intended as standing platforms\u003c\/li\u003e\n\u003cli\u003eFor safest operation please keep static loads below 300 lbs or 136 kg\u003c\/li\u003e\n\u003cli\u003eDisassembly or product alterations are not recommended\u003c\/li\u003e\n\u003cli\u003eDo not use products for uses other than intended\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e​\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the Reversible Flip Stop and what does it do?\u003c\/strong\u003e The Reversible Flip Stop is a precision stop designed to attach to the Gen 2 Dash-Board F1 and F2 Surface Mount Fences, enabling repeatable cut lengths without re-measuring. Set the stop at your desired length, lock it in place, and run identical parts back to back. The two-sided reversible design lets you orient the stop face in either direction depending on your workflow, and the solid, rigid build holds its setting under repeated workpiece contact.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIs the Reversible Flip Stop compatible with my fence?\u003c\/strong\u003e The Reversible Flip Stop is compatible only with the Gen 2 Dash-Board F1 and F2 Surface Mount Fences. It will not work with Gen 1 Dash-Board fences or with third-party fence systems from other manufacturers. If you're unsure which generation of fence you own, check your original purchase records or contact Dash-Board directly before adding the Flip Stop to your order.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCan I use multiple Flip Stops on the same fence?\u003c\/strong\u003e Yes, you can run multiple Reversible Flip Stops on the same fence to set multiple cut lengths without resetting between dimensions. Many Dash-Board owners run two or three Flip Stops at once, with each set to a different repeat length, then flip the unused stops up and out of the way during each cut. This is particularly useful for batch work involving multiple part sizes from the same workpiece.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the difference between the Reversible Flip Stop and a standard fence stop?\u003c\/strong\u003e The difference between the Reversible Flip Stop and a standard fence stop is the two-sided reversible design and the flip mechanism. The reversible faces allow the stop to register workpieces from either direction without removing and reinstalling the stop, and the flip mechanism lets you swing it up out of the way for longer cuts without losing the setting. Both features speed up workflows that mix repeat cuts with one-off long cuts in the same session.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included with the Reversible Flip Stop?\u003c\/strong\u003e The Reversible Flip Stop is sold as a single unit (1 Flip Stop per order). The unit includes the body, the reversible stop faces, and the locking knob, all integrated as a single piece for tool-free setup. No additional mounting hardware is required, the Flip Stop attaches directly to a Gen 2 Dash-Board F1 or F2 Surface Mount Fence. Many woodworkers order multiple Flip Stops to enable multiple cut lengths set simultaneously.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dashboard PWS","offers":[{"title":"Default Title","offer_id":43569524375600,"sku":"FS0001-DASH","price":14.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4876\/8304\/files\/npmfxxdk0lbs_6417b3de-5cba-4598-a656-7278de791eee.jpg?v=1788561560"},{"product_id":"dashboard-mft-spirail-bench-dogs-for-guide-rail-registration-2-pack-sd0001-b9dpmh","title":"Dashboard MFT SpiRail Bench Dogs for Guide Rail Registration, 2-Pack (SD0001)","description":"\u003ch2\u003eGuide Rail Registration Bench Dogs for 20mm MFT Benches\u003c\/h2\u003e\u003cp\u003eSpiRail Bench Dogs register your track saw guide rail to the bench for repeatable, square cuts on any 20mm-grid MFT-style table. The spiral groove locks Festool, Makita, Bosch, and Mafell rails in place and keeps the rail dead-square through the full length of the cut.\u003c\/p\u003e\u003ch3\u003eA unique spiral groove. The whole point of the dog.\u003c\/h3\u003e\u003cp\u003eTraditional rail dogs are just round pins. They drop into a 20mm hole, register your guide rail, and that's it. SpiRail Dogs do the same job better. The unique spiral groove machined into the body of each dog gives you something to grab, something that tightens quickly when you twist, and something that releases just as fast when you're done. The result is better handling and a better user experience. It's a small design detail. It matters every time you pick one up.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUnique spiral groove for grip and quick tightening\u003c\/li\u003e\n\u003cli\u003eBetter handling than smooth-body dogs\u003c\/li\u003e\n\u003cli\u003eNo tools required\u003c\/li\u003e\n\u003cli\u003eFits 20mm holes, Guide Rail Brackets, Track Stars, Wingman, and Dash-Boards unique slotted holes in our benchtops.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/Spirail_Dogs_3_a08c9d23-979b-415b-9061-2620e4e4cf48.png?v=1783439495\" alt=\"SpiRail Dogs (set of 2)\"\u003e\u003c\/p\u003e\u003ch3\u003eFits every major guide rail brand.\u003c\/h3\u003e\u003cp\u003eSpiRail Dogs are compatible with all major track saw and guide rail brands. Festool, Makita-style rails, Bosch, Mafell, DeWalt, Metabo, Powertec, Milwaukee, WEN, and Grizzly. The dogs slip into the bottom slot of any standard guide rail and provide the registration point that the rest of the Dash-Board system, Guide Rail Brackets, Track Stars, the Wingman, registers off of. One pair of dogs covers every rail in your shop and every accessory in the Dash-Board ecosystem.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFestool, Makita, DeWalt, Bosch, Mafell\u003c\/li\u003e\n\u003cli\u003eMetabo, Powertec, Milwaukee, WEN, Grizzly\u003c\/li\u003e\n\u003cli\u003eSlips into the bottom slot of any standard guide rail\u003c\/li\u003e\n\u003cli\u003eOne pair works across your entire rail collection\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/GRB_Action_Shot_70b2b04e-3c51-4cd6-be2c-da217f721a87.jpg?v=1783439491\" alt=\"SpiRail Dogs (set of 2)\"\u003e\u003c\/p\u003e\u003ch3\u003eThe key to Dash-Board's accuracy and simplicity.\u003c\/h3\u003e\u003cp\u003eEvery dimensional accessory in the Dash-Board system depends on the rail being where you put it, and SpiRail Dogs are how that happens. They register on the Guide Rail Brackets for square crosscuts. They drop into Track Stars for full-sheet rips. They slip into the Wingman's milled slot for added crosscut and rip capacity. They also fit into slotted holes on Dash-Board and ShortCut bench tops. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRegisters rails on Guide Rail Brackets for crosscuts\u003c\/li\u003e\n\u003cli\u003eDrops into Track Stars for rips\u003c\/li\u003e\n\u003cli\u003eSlips into the Wingman for extended capacity\u003c\/li\u003e\n\u003cli\u003eFits into slotted holes on Dash-Board and ShortCut bench tops\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/coremft-crosscut-side_1887d2f5-06c1-43be-8f95-4b15dc57830d.jpg?v=1783439494\" alt=\"SpiRail Dogs (set of 2)\"\u003e\u003c\/p\u003e\u003ch3\u003eSolid aluminum. Built for daily use.\u003c\/h3\u003e\u003cp\u003eSpiRail Dogs are machined from anodized aluminum with zinc-plated steel hardware, the same level of build quality as every other Dash-Board accessory. They don't deform under repeated use, they don't corrode in shop or job-site conditions, and they hold their fit with the bench's 20mm holes after years of being pulled in and out. They're also one of the most affordable and most essential pieces in the system, every accessory in the rail registration chain depends on them.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAnodized aluminum body\u003c\/li\u003e\n\u003cli\u003eZinc-plated steel hardware\u003c\/li\u003e\n\u003cli\u003e81mm long\u003c\/li\u003e\n\u003cli\u003eHolds tolerance with repeated use\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/SpiRail_Dogs_3_f8b8e293-fa8d-4aea-b1d7-92476f25d670.png?v=1783439492\" alt=\"SpiRail Dogs (set of 2)\"\u003e\u003c\/p\u003e\u003ch3\u003eWhat’s in the box:\u003c\/h3\u003e\u003cp\u003e1 pair of SpiRail Dogs\u003c\/p\u003e\u003ch3\u003eMaterials:\u003c\/h3\u003e\u003cp\u003eAnodized aluminum and zinc plated steel\u003c\/p\u003e\u003ch3\u003eSpecifications:\u003c\/h3\u003e\u003cp\u003eLength: 81mm​\u003c\/p\u003e\u003cp\u003eFits: 20mm holes\u003c\/p\u003e\u003ch3\u003eCompatibility:\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eWorks with these track saws\/guide rails:\u003c\/b\u003e Festool\/Makita-style rails · Bosch\/Mafell rails · DeWalt\/Metabo rails · Powertec · Milwaukee · WEN · Grizzly\u003c\/p\u003e\u003cp\u003e​\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWorks with these workbenches: \u003c\/b\u003eAll workbenches with 20mm holes\u003c\/p\u003e\u003ch4\u003eProduct Safety:\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eBe mindful of pinch points\u003c\/li\u003e\n\u003cli\u003eSecure all hardware before use to avoid accidents or injury.\u003c\/li\u003e\n\u003cli\u003eUse appropriate lifting form to avoid injury\u003c\/li\u003e\n\u003cli\u003eKeep out of reach of children\u003c\/li\u003e\n\u003cli\u003eWorkbenches and Outriggers not intended as standing platforms\u003c\/li\u003e\n\u003cli\u003eFor safest operation please keep static loads below 300 lbs or 136 kg\u003c\/li\u003e\n\u003cli\u003eDisassembly or product alterations are not recommended\u003c\/li\u003e\n\u003cli\u003eDo not use products for uses other than intended\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e​\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat are SpiRail Dogs and how are they different from regular rail dogs?\u003c\/strong\u003e SpiRail Dogs are precision-machined aluminum rail dogs that feature a unique spiral groove along the body, designed to improve grip, handling, and tightening speed compared to traditional smooth-body rail dogs. The dogs slip into the bottom slot of any major guide rail and provide a 20mm registration point for benches and Dash-Board accessories. The spiral groove is the defining feature, it gives you something to grip when tightening or removing the dog, which speeds up setup changes during multi-step workflows.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAre SpiRail Dogs compatible with my track saw?\u003c\/strong\u003e SpiRail Dogs are compatible with all major track saw and guide rail brands, including Festool, Makita-style rails, Bosch, Mafell, DeWalt, Metabo, Powertec, Milwaukee, WEN, and Grizzly. The dogs slip into the bottom slot of any standard guide rail, no rail-specific hardware is required. If your saw uses a standard guide rail with a bottom T-slot, the SpiRail Dogs will fit it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo I need SpiRail Dogs to use my Dash-Board accessories?\u003c\/strong\u003e You need SpiRail Dogs to register your guide rail on Track Stars, the Wingman, and the front Guide Rail Bracket for full system use. The Guide Rail Bracket Set ships with one SpiRail Dog included for the front bracket registration. For ripping and crosscutting workflows that use Track Stars or the Wingman, you'll need additional SpiRail Dogs, typically one pair per workstation, sometimes more for extended setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat workbenches do SpiRail Dogs work with?\u003c\/strong\u003e SpiRail Dogs work with all workbenches that have 20mm holes, including the Dash-Board bench, ShortCut bench, Festool MFT3 and 1080, Benchdogs Ultra MFT, Kreg ACS, and DIY MFT-style benches built on a 20mm grid. They also slip into the slotted holes on the Dash-Board and ShortCut bench tops when you are working on shorter pieces, which is a use case unique to the Dash-Board system's bench top design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow many SpiRail Dogs do I need?\u003c\/strong\u003e Most Dash-Board owners run between one and three pairs of SpiRail Dogs depending on workflow. For basic crosscut work with the Guide Rail Bracket Set, the single dog included with the brackets is enough. For ripping on Track Stars, you'll want a pair for the outboard registration. For extended rip configurations using the Wingman, plan on having two or three pairs ready so you can stage multiple cut setups without swapping dogs between them.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dashboard PWS","offers":[{"title":"Default Title","offer_id":43569524441136,"sku":"SD0001-DASH","price":14.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4876\/8304\/files\/qrt7ga3vo1mn_66239e1d-fad4-47cd-932a-f4ee94ea1794.jpg?v=1788561563"},{"product_id":"dashboard-mft-rip-gauge-for-precise-parallel-guide-width-setting-rg0001-qlpfjb","title":"Dashboard MFT Rip Gauge for Precise Parallel Guide Width Setting (RG0001)","description":"\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/fUqnpsoHpw8?si=DSVWPLfwIRsFFGiP\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen\u003e\u003c\/iframe\u003e\u003ch2\u003ePrecision Rip-Width Tool for Track Saw Parallel Guides\u003c\/h2\u003e\u003cp\u003eThe Rip Gauge sets exact rip widths on your parallel guides with kerf compensation built in, so the dimension you dial in is the dimension you cut. It is the measuring tool that makes repeatable track saw rips foolproof on a Festool MFT, Dash-Board, or Track Star setup.\u003c\/p\u003e\u003ch3\u003eSets multiple stops with a single reference. Kerf already factored in.\u003c\/h3\u003e\u003cp\u003eThe Rip Gauge is a precision setup tool that positions stops at a fixed distance from a track saw blade so you can cut to a finished dimension without factoring in blade kerf. It replicates your blade kerf using one of three swappable plates (1.8mm, 2.2mm, or 2.4mm), so you set the carbon fiber extension to your desired finished measurement and the cut lands exactly on that dimension every time. No mental math. No subtracting kerf width. No double-checking before you cut.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e3 swappable kerf tabs included (1.8mm, 2.2mm, 2.4mm)\u003c\/li\u003e\n\u003cli\u003eKerf tabs store on-board the Rip Gauge\u003c\/li\u003e\n\u003cli\u003eSwap kerfs plates quickly\u003c\/li\u003e\n\u003cli\u003eComfortable all-metal knob\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/Rip_Gauge_5_5f79f316-0f2d-4e67-9eb9-d84a320b3c79.png?v=1783439493\" alt=\"The Rip Gauge\"\u003e\u003c\/p\u003e\u003ch3\u003eRepeatable rips up to 25½\" without re-measuring.\u003c\/h3\u003e\u003cp\u003eThe Rip Gauge sets stops up to 25½\" (648mm) from either side of your track saw's blade. This range covers most cabinet, furniture, and panel-cutting dimensions, including cabinet door widths, drawer fronts, face frames, and shelf depths. The Rip Gauge measures 30.312\" (770mm) overall and works with stops on both sides of the blade. Use it to duplicate the dimensions of existing parts without measuring, set the gauge against your guide rail and slide your stops up to the carbon fiber extension. Made to work with Rip Stops, Flip Stops, and Parallel Guides.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSets stops up to 25½\" (648mm)\u003c\/li\u003e\n\u003cli\u003eWorks on both sides of the blade\u003c\/li\u003e\n\u003cli\u003eDuplicates existing part dimensions without measuring\u003c\/li\u003e\n\u003cli\u003ePairs with Rip Stops, Flip Stops, and Parallel Guides\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/Rip_Gauge_Thumbnail_1064ceb5-646b-46a3-b429-1ca084381fe3.png?v=1783439492\" alt=\"The Rip Gauge\"\u003e\u003c\/p\u003e\u003ch3\u003eWorks with every major guide rail and track saw brand.\u003c\/h3\u003e\u003cp\u003eThe Rip Gauge supports track saw blade kerfs of 1.8mm, 2.2mm, and 2.4mm through three swappable kerf tabs included with every unit. These three kerfs cover the most prevalent kerf widths of all major track saw blades, including Festool, Makita, DeWalt, Bosch, Mafell, Metabo, Milwaukee, WEN, and Grizzly. If your saw uses a standard kerf in that range, the Rip Gauge works with it out of the box.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFestool, Makita, DeWalt, Bosch, Mafell\u003c\/li\u003e\n\u003cli\u003eMetabo, Milwaukee, WEN, Grizzly\u003c\/li\u003e\n\u003cli\u003eAny track saw with 1.8mm, 2.2mm, or 2.4mm blade kerf\u003c\/li\u003e\n\u003cli\u003eOne Rip Gauge, multiple saws\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/RGwithPG_64bfdb8b-8737-45d6-ad78-9a159563adde.jpg?v=1783439493\" alt=\"The Rip Gauge\"\u003e\u003c\/p\u003e\u003ch3\u003eOne reference replaces calibration.\u003c\/h3\u003e\u003cp\u003eTraditional parallel guide systems require independent calibration of each guide and verification that both sides match, which verified buyers cite as the reason they switched from systems like TSO. The Rip Gauge is a single, physical reference for setting multiple Dash-Board Parallel Guides to precise dimensions off the blade with kerf already factored in on both sides of a guide rail. Set once, cut all day. Pull it back out tomorrow and set the same dimension in seconds.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSingle physical reference for both parallel guides\u003c\/li\u003e\n\u003cli\u003eNo independent calibration of left and right\u003c\/li\u003e\n\u003cli\u003eKerf already factored in on both sides\u003c\/li\u003e\n\u003cli\u003eRepeatable setups across multiple sessions\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/Rip_Gauge_6_e6083746-a4eb-4de9-b3e3-7f683877f948.png?v=1783439493\" alt=\"The Rip Gauge\"\u003e\u003c\/p\u003e\u003ch3\u003eWhat’s in the box:\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 Rip Gauge\u003c\/li\u003e\n\u003cli\u003e3 Kerf Plates (1.8mm, 2.2mm, 2.4mm)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eMaterials:\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCarbon fiber\u003c\/li\u003e\n\u003cli\u003eAluminum\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications:\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLength = 30.312” (770mm)\u003c\/li\u003e\n\u003cli\u003eWidth = 3.75” (95mm)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKey Features:\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSettings from 0\" to 25 ½\"\/647mm\u003c\/li\u003e\n\u003cli\u003eLightweight, rigid carbon fiber extension\u003c\/li\u003e\n\u003cli\u003e3 swappable blade kerf tabs (1.8 mm, 2.2 mm, 2.4 mm)\u003c\/li\u003e\n\u003cli\u003eIncludes metric and inch scale\u003c\/li\u003e\n\u003cli\u003eKerf tabs store on-board\u003c\/li\u003e\n\u003cli\u003eComfortable all-metal knob\u003c\/li\u003e\n\u003cli\u003eWorks with any guide rail\u003c\/li\u003e\n\u003cli\u003eWorks with stops on both sides of the blade.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003e​Product Safety:\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eBe mindful of pinch points\u003c\/li\u003e\n\u003cli\u003eSecure all hardware before use to avoid accidents or injury.\u003c\/li\u003e\n\u003cli\u003eUse appropriate lifting form to avoid injury\u003c\/li\u003e\n\u003cli\u003eKeep out of reach of children\u003c\/li\u003e\n\u003cli\u003eWorkbenches and Outriggers not intended as standing platforms\u003c\/li\u003e\n\u003cli\u003eFor safest operation please keep static loads below 300 lbs or 136 kg\u003c\/li\u003e\n\u003cli\u003eDisassembly or product alterations are not recommended\u003c\/li\u003e\n\u003cli\u003eDo not use products for uses other than intended\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp style=\"color:transparent!important\"\u003e \u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is a rip gauge and how does it work?\u003c\/strong\u003e A rip gauge is a precision setup tool that positions stops at a fixed distance from a track saw blade so you can cut to a finished dimension without factoring in blade kerf. The Dash-Board Rip Gauge replicates your blade kerf using one of three swappable plates (1.8mm, 2.2mm, or 2.4mm), so you set the carbon fiber extension to your desired finished measurement and the cut lands exactly on that dimension every time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the maximum cut length the Rip Gauge can set?\u003c\/strong\u003e The Rip Gauge can set stops up to 25 1\/2\" (648mm) from either side of your track saw's blade. This range covers most cabinet, furniture, and panel-cutting dimensions, including cabinet door widths, drawer fronts, face frames, and shelf depths. The Rip Gauge measures 30.312\" (770mm) overall and works with stops on both sides of the blade.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat blade kerfs does the Dash-Board Rip Gauge support?\u003c\/strong\u003e The Dash-Board Rip Gauge supports track saw blade kerfs of 1.8mm, 2.2mm, and 2.4mm through three swappable kerf tabs included with every unit. These three kerfs cover the most prevalent kerf widths of all major track saw blades, including Festool, Makita, DeWalt, Bosch, Mafell, Metabo, Milwaukee, WEN, and Grizzly. The kerf tabs store on-board the Rip Gauge, and swapping between them takes seconds with no tools.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow does the Rip Gauge work with parallel guides?\u003c\/strong\u003e The Rip Gauge works by replacing individual calibration of parallel guides with a single, kerf-corrected reference. Traditional parallel guide systems require independent calibration of each guide and verification that both sides match, which verified buyers cite as the reason they switched from systems like TSO. The Rip Gauge is a unique, single, physical reference for setting multiple Dash-Board Parallel Guides to precise dimensions off the blade with kerf already factored in on both sides of a guide rail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included with the Dash-Board Rip Gauge?\u003c\/strong\u003e The Dash-Board Rip Gauge includes one Rip Gauge unit and three Kerf Plates sized for 1.8mm, 2.2mm, and 2.4mm blade kerfs. The Rip Gauge is built from a lightweight, rigid carbon fiber extension and aluminum body and stores all three kerf tabs on-board. The unit measures 30.312\" (770mm) long by 3.75\" (95mm) wide and works with any guide rail brand using a standard kerf in the 1.8mm to 2.4mm range.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dashboard PWS","offers":[{"title":"Default Title","offer_id":43569524604976,"sku":"RG0001-DASH","price":47.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4876\/8304\/files\/8pa4ud8tdbpb_e1e43062-d5bf-4c36-9874-2b656fd585a3.jpg?v=1788561570"},{"product_id":"dashboard-mft-surface-mount-crosscut-miter-fence-for-track-saws-f20001-au0088","title":"Dashboard MFT Surface-Mount Crosscut \u0026 Miter Fence for Track Saws (F20001)","description":"\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/sdscETsqIPE?si=eo2ACRw85nsdWuPw\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen\u003e\u003c\/iframe\u003e\u003ch2\u003eCrosscut \u0026amp; Miter Fence for Festool MFT and Track Saw Benches\u003c\/h2\u003e\u003cp\u003eThe F2 Surface-Mount Fence is a combined crosscut and miter fence for Festool MFT\/3 owners and track saw users who need both square and angled cuts from a single accessory. Mount it on the bench top or on Track Stars to extend capacity, and dial in repeatable angles with any right-cutting track saw.\u003c\/p\u003e\u003ch3\u003eYour crosscut reference edge.\u003c\/h3\u003e\u003cp\u003eThe F2 is solid, sleek, and versatile, the main fence in the Dash-Board system. It gives you a long, dead-true reference edge on top of your bench so every workpiece registers in the same place, cut after cut. Set the F2 once against your guide rail and the rail brackets, lock it down, and run repeat parts all day without re-measuring. A tongue section slips under the guide rail to support material right near the cut line for cleaner, splinter-free crosscuts.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e54¾\" (1390mm) long anodized aluminum extrusion\u003c\/li\u003e\n\u003cli\u003eSolid, rigid reference edge for repeat work\u003c\/li\u003e\n\u003cli\u003eTongue section supports material near the cut line\u003c\/li\u003e\n\u003cli\u003eDesigned to work with the Guide Rail Brackets and Track Stars\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/Guide-Rail-Bracket-Set-7_60c6b4d5-ec1e-4031-9a52-a6825c7e0af9.jpg?v=1783439492\" alt=\"F2 Surface Mount Fence\"\u003e\u003c\/p\u003e\u003ch3\u003eMount it on any bench with 20mm holes.\u003c\/h3\u003e\u003cp\u003eThe F2 mounts to any 20mm hole grid using our unique sliding Fence Blocks. Three blocks come with each fence, and they slide along the fence extrusion to match whatever hole pattern your bench has. Drop them into the holes, lock them down with all-metal knobs, and the fence is set. No tools. No fasteners. No fiddling with hardware you'll lose.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e3 sliding Fence Blocks included\u003c\/li\u003e\n\u003cli\u003eMounts to any grid of 20mm holes\u003c\/li\u003e\n\u003cli\u003eAll-metal knobs, tool-free installation\u003c\/li\u003e\n\u003cli\u003eAdjustable along the fence extrusion\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/f2-surface-mount_0b2e85b3-17af-4eb8-a54b-612f88a50537.jpg?v=1783439493\" alt=\"F2 Surface Mount Fence\"\u003e\u003c\/p\u003e\u003ch3\u003eAdd Track Stars and swing through any angle.\u003c\/h3\u003e\u003cp\u003eThe F2 isn't just for 90-degree cuts. Mount one end to your bench and the other end to a Track Star and you can swing the fence through a wide range of angles, then secure it for miter cuts that set up as easily as a crosscut. The F2 is also compatible with our Reversible Flip Stop for repeat-length miters or angled batch work.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSwings through wide angle range for miters\u003c\/li\u003e\n\u003cli\u003eMounts on Track Stars for added crosscut capacity\u003c\/li\u003e\n\u003cli\u003eCompatible with Reversible Flip Stop for repeat cuts\u003c\/li\u003e\n\u003cli\u003eSame workflow whether square or angled\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/F2Fence2_0a57ee73-3118-47bd-8c44-f77aa88e6512.jpg?v=1783439491\" alt=\"F2 Surface Mount Fence\"\u003e\u003c\/p\u003e\u003ch3\u003eAnodized aluminum. Built to live in your shop.\u003c\/h3\u003e\u003cp\u003eThe F2 is built from a single proprietary anodized aluminum extrusion that resists wear, marking, and corrosion in shop and job-site conditions. A rubber bumper on the end protects the fence and your floor when you stand it up between uses. Like every Dash-Board accessory, the F2 is designed to be the last fence you'll buy.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProprietary anodized aluminum extrusion\u003c\/li\u003e\n\u003cli\u003eRubber bumper for vertical storage\u003c\/li\u003e\n\u003cli\u003eResistant to wear, corrosion, and shop conditions\u003c\/li\u003e\n\u003cli\u003eDesigned for long-term professional use\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/F2Fence7_0aef0c43-a00d-4772-a1b8-ad4ad21637f6.jpg?v=1783439491\" alt=\"F2 Surface Mount Fence\"\u003e\u003c\/p\u003e\u003ch3\u003eWhat’s in the box:\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 F2 Fence Extrusion\u003c\/li\u003e\n\u003cli\u003e3 Fence Blocks\u003c\/li\u003e\n\u003cli\u003e1 Rubber Bumper​\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eMaterials:\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAnodized aluminum\u003c\/li\u003e\n\u003cli\u003eRubber bumper\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications:\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLength: 54.75” (1390mm)\u003c\/li\u003e\n\u003cli\u003eWidth: 1.1” (28mm)\u003c\/li\u003e\n\u003cli\u003eHeight: 1.5” (38mm)​\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKey Features:\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAdjustable to \u003cb\u003eany\u003c\/b\u003e angle\u003c\/li\u003e\n\u003cli\u003eCompatible with any grid of 20mm holes\u003c\/li\u003e\n\u003cli\u003eEasily and securely mounts with our unique Fence Blocks\u003c\/li\u003e\n\u003cli\u003eTongue section slips under the guide rail for support near the cut line\u003c\/li\u003e\n\u003cli\u003eCompatible with our Reversible Flip Stops for repeat cuts\u003c\/li\u003e\n\u003cli\u003eAlso mounts on Track Stars for added crosscut capacity\u003c\/li\u003e\n\u003cli\u003eRubber bumper to protect fence and floor when stored standing up\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e​\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWorks only with track saws\/guide rails that cut on the right side of the blade:\u003c\/b\u003e Festool\/Makita-style rails · Bosch\/Mafell rails · DeWalt\/Metabo rails · Powertec · Milwaukee · WEN · Grizzly \u003c\/p\u003e\u003cp\u003e​\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWorks with these workbenches: \u003c\/b\u003eAny workbench with 20mm holes \u003c\/p\u003e\u003ch4\u003eProduct Safety:\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eBe mindful of pinch points\u003c\/li\u003e\n\u003cli\u003eSecure all hardware before use to avoid accidents or injury.\u003c\/li\u003e\n\u003cli\u003eUse appropriate lifting form to avoid injury\u003c\/li\u003e\n\u003cli\u003eKeep out of reach of children\u003c\/li\u003e\n\u003cli\u003eWorkbenches and Outriggers not intended as standing platforms\u003c\/li\u003e\n\u003cli\u003eFor safest operation please keep static loads below 300 lbs or 136 kg\u003c\/li\u003e\n\u003cli\u003eDisassembly or product alterations are not recommended\u003c\/li\u003e\n\u003cli\u003eDo not use products for uses other than intended\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp style=\"color:transparent!important\"\u003e \u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the F2 Surface Mount Fence and what does it do?\u003c\/strong\u003e The F2 Surface Mount Fence is the main reference fence of the Dash-Board system, a 54¾\" anodized aluminum extrusion that mounts on top of any bench with a 20mm hole grid. The F2 enables repeatable crosscuts, miters, and rip setups by holding workpieces against a consistent edge, eliminating the need to re-measure between cuts. Three sliding Fence Blocks let it mount on any 20mm hole pattern without tools.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat workbenches is the F2 Fence compatible with?\u003c\/strong\u003e The F2 Fence is compatible with any workbench that has a 20mm hole grid, including the Dash-Board bench, ShortCut bench, Festool MFT3 and 1080, Benchdogs Ultra MFT, Kreg ACS, and DIY MFT-style benches. The Fence Blocks slide along the fence extrusion to match any hole spacing, then lock down with all-metal knobs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes the F2 Fence work with my track saw?\u003c\/strong\u003e The F2 Fence works with track saws that cut on the right side of the guide rail, including Festool, Makita-style rails, Bosch, Mafell, DeWalt, Metabo, Powertec, Milwaukee, WEN, and Grizzly. Verify your saw's blade position before purchase, as the F2 is designed around right-of-blade cutting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCan the F2 Fence be used for miter cuts?\u003c\/strong\u003e Yes, the F2 Fence is adjustable to any angle and can be swung through a wide range of positions, then secured for repeatable miter cuts. Mount one end to your bench and the other end to a Track Star, then rotate to your desired angle. The fence pairs with the Reversible Flip Stop for repeat-length miters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included with the F2 Surface Mount Fence?\u003c\/strong\u003e The F2 Surface Mount Fence includes one 54¾\" anodized aluminum fence extrusion, three sliding Fence Blocks, and one rubber bumper for vertical storage. Note that Gen 2 and Gen 1 Fences and Flip Stops cannot be mixed.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dashboard PWS","offers":[{"title":"Default Title","offer_id":43569524670512,"sku":"F20001-DASH","price":68.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4876\/8304\/files\/5f4qg9akpc05_e44964a9-a8d7-448d-87b0-7ad9bcf20e28.jpg?v=1788561571"},{"product_id":"dashboard-mft-parallel-guides-for-repeatable-track-saw-rips-2-pack-pg0001-n0tgsv","title":"Dashboard MFT Parallel Guides for Repeatable Track Saw Rips, 2-Pack (PG0001)","description":"\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/x65wejrXvQ0?si=AWWnVraucvfZYPoS\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen\u003e\u003c\/iframe\u003e\u003ch2\u003eRepeatable Track Saw Rip Guides for MFT Benches\u003c\/h2\u003e\u003cp\u003eDashboard Parallel Guides let track saw users rip repeatable, dead-parallel widths off a Festool MFT, Dash-Board, or Track Star setup. Set the width once and reproduce it cut after cut with Festool, Makita, Bosch, or Mafell rails, bringing table-saw rip accuracy to your track saw.\u003c\/p\u003e\u003ch3\u003eAnchors into your bench. Not your guide rail.\u003c\/h3\u003e\u003cp\u003eMost parallel guide systems clamp to your track saw's guide rail, which means the calibration is only as accurate as the rail clamps and the guide rail's position. Dash-Board's Parallel Guides anchor directly into your bench top's 20mm holes or into Track Stars instead. The reference point is the bench, not the rail, and the bench doesn't move.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAnchors into 20mm bench holes or Track Stars\u003c\/li\u003e\n\u003cli\u003eNo clamping to your guide rail\u003c\/li\u003e\n\u003cli\u003eTraditional parallel guide calibration not required\u003c\/li\u003e\n\u003cli\u003eWorks on either side of the guide rail\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/Parallel_Guide_4_b9bb7832-d3fb-4ccd-8372-9da28fd8fcf6.jpg?v=1783439491\" alt=\"Parallel Guide (set of 2)\"\u003e\u003c\/p\u003e\u003ch3\u003eTwo ends. Two heights. One guide.\u003c\/h3\u003e\u003cp\u003eEach Parallel Guide has two different ends with different reference heights. Use the thin end under your guide rail for cutting dimensions narrower than the rail. Use the tall end for stacked material and for when Parallel Guides are on the right side of the blade.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e6mm end slips under your guide rail for narrow cuts\u003c\/li\u003e\n\u003cli\u003e29mm aluminum cap end raises reference height\u003c\/li\u003e\n\u003cli\u003eCuts under 1\" wide with no additional attachments\u003c\/li\u003e\n\u003cli\u003eSupports material as thin as ¼\"\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/Parallel_Guide_Thumbnail_0366ca1b-ae8b-4967-82af-426cf0bbb217.png?v=1783439493\" alt=\"Parallel Guide (set of 2)\"\u003e\u003c\/p\u003e\u003ch3\u003eSet stops on both sides of the blade. \u003c\/h3\u003e\u003cp\u003ePaired with the Rip Gauge, Dash-Board Parallel Guides simplify the process of getting parallel cuts. You use one standard to set both guides, rather than two scales to set two guides. Uniquely, Dash-Board Parallel Guides work on both sides of the blade. You can use the thin side underneath your guide rail for narrow cuts in material as thin as 1\/4\"\/6.5mm. Use the tall end for wider pieces  on either side of the guide rail.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e29mm cap enables Rip Gauge dimension setting\u003c\/li\u003e\n\u003cli\u003eSame kerf-corrected dimension on both sides of the blade\u003c\/li\u003e\n\u003cli\u003eReplaces individual guide calibration with a single reference\u003c\/li\u003e\n\u003cli\u003eVerified upgrade path from TSO and similar traditional designs\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/rip-gauge-in-use-makita-rail-action_d8025838-5d61-4d93-a9d4-b6de2a87e2b8.jpg?v=1783439493\" alt=\"Parallel Guide (set of 2)\"\u003e\u003c\/p\u003e\u003ch3\u003eThe piece that makes rips repeatable.\u003c\/h3\u003e\u003cp\u003eThe Parallel Guide is the stop. The Rip Gauge sets the standard. The Track Stars are the platform that lets you rip past the bench edge. Together, this is the workflow Dash-Board owners use to retire their table saws. Mount the guides in your bench top for  narrower rips. Mount them in Track Stars for the widest rips. Same guides, same workflow, no calibration.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMounts in bench top for narrow to medium rips\u003c\/li\u003e\n\u003cli\u003eMounts in Track Stars for wider rips\u003c\/li\u003e\n\u003cli\u003eBuilt from carbon fiber and aluminum for stiffness and weight\u003c\/li\u003e\n\u003cli\u003eThe system piece that unlocks the rip workflow\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/parallel-guide-on-track-star_28aaeb32-b88b-46ab-9437-4702e47289dd.jpg?v=1783439493\" alt=\"Parallel Guide (set of 2)\"\u003e\u003c\/p\u003e\u003ch3\u003eWhat’s in the box:\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2 Parallel Guides\u003c\/li\u003e\n\u003cli\u003e2 aluminum caps\u003c\/li\u003e\n\u003cli\u003e4 ExpanDogs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eMaterials:\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCarbon fiber\u003c\/li\u003e\n\u003cli\u003eAluminum\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications:\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLength = 15.625” (388mm)\u003c\/li\u003e\n\u003cli\u003eWidth = 1.5” (38mm)\u003c\/li\u003e\n\u003cli\u003eHeight = 6mm to 29mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\u003ch3\u003eWorks with these workbenches: \u003c\/h3\u003e\u003cp\u003eAll workbenches with 20mm holes · Dash-Board bench · ShortCut bench · Festool MFT3 \u0026amp; 1080 · Benchdogs Ultra MFT  · TrackTubes \n\u003c\/p\u003e\u003ch4\u003e\nProduct Safety:\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eBe mindful of pinch points\u003c\/li\u003e\n\u003cli\u003eSecure all hardware before use to avoid accidents or injury.\u003c\/li\u003e\n\u003cli\u003eUse appropriate lifting form to avoid injury\u003c\/li\u003e\n\u003cli\u003eKeep out of reach of children\u003c\/li\u003e\n\u003cli\u003eWorkbenches and Outriggers not intended as standing platforms\u003c\/li\u003e\n\u003cli\u003eFor safest operation please keep static loads below 300 lbs or 136 kg\u003c\/li\u003e\n\u003cli\u003eDisassembly or product alterations are not recommended\u003c\/li\u003e\n\u003cli\u003eDo not use products for uses other than intended\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow are Dash-Board Parallel Guides different from other parallel guide systems?\u003c\/strong\u003e Dash-Board Parallel Guides anchor into your bench top's 20mm holes or Track Stars rather than clamping to your guide rail. This eliminates the need to independently calibrate left and right guides. Each guide also has two reference heights (6mm and 29mm) for different cutting situations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the narrowest cut I can make with Dash-Board Parallel Guides?\u003c\/strong\u003e Dash-Board Parallel Guides cut material narrower than 1\" wide and as thin as ¼\" thick with no additional attachments. The 6mm slip-under end registers underneath your guide rail for narrow cuts most other systems can't handle without optional accessories.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo I need the Rip Gauge to use Parallel Guides?\u003c\/strong\u003e You do not strictly need the Rip Gauge, but pairing them is the workflow most owners build out. The Rip Gauge provides a single reference for setting both guides to the same kerf-corrected dimension, replacing the individual calibration step other systems require.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat workbenches are Parallel Guides compatible with?\u003c\/strong\u003e Dash-Board Parallel Guides are compatible with all workbenches that have a 20mm hole grid, including the Dash-Board bench, ShortCut bench, Festool MFT3 and 1080, Benchdogs Ultra MFT, TrackTubes, and DIY MFT-style benches. They anchor using the included ExpanDogs with no drilling required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included with the Parallel Guide set?\u003c\/strong\u003e The set includes 2 Parallel Guides, 2 aluminum caps, and 4 ExpanDogs. The guides are built from carbon fiber with aluminum hardware, measuring 15.625\" long by 1.5\" wide. Recommended pairings include the Rip Gauge and Track Stars.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dashboard PWS","offers":[{"title":"Default Title","offer_id":43569524768816,"sku":"PG0001-DASH","price":44.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4876\/8304\/files\/djtyyauysjxq_3e601b1f-6c76-4f97-88af-07094897c195.jpg?v=1788561574"},{"product_id":"dashboard-mft-core-crosscut-bundle-for-track-saws-cmb001-x88di4","title":"Dashboard MFT Core Crosscut Bundle for Track Saws (CMB001)","description":"\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/latZcbecLjo?si=0GVd-wOlT-SNXn3o\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen\u003e\u003c\/iframe\u003e\u003ch2\u003eFestool MFT Upgrade Kit for Precision Track Saw Crosscuts\u003c\/h2\u003e\u003cp\u003eThe Core MFT Bundle turns a Festool MFT\/3, Kreg ACS, Benchdogs Ultra MFT, or any 20mm-grid bench into a precision track saw crosscut station, with no bench replacement required. Built for Festool, Makita, Bosch, Mafell, DeWalt, and Metabo guide rails, it bundles the squaring brackets, fence, and flip stop that fix the repeatable-accuracy problem MFT owners run into most.\u003c\/p\u003e\u003ch3\u003eThe Festool MFT upgrade kit.\u003c\/h3\u003e\u003cp\u003eIf you own a Festool MFT3, Kreg ACS, Benchdogs Ultra MFT, or any DIY bench built on a 20mm grid, the Core MFT Bundle is the most direct path to better crosscuts on the bench you already own. The Guide Rail Bracket Set ends the frustration of endless re-calibration that Festool MFT owners describe as their primary pain point. The F2 Fence sets a solid reference edge. The Reversible Flip Stop enables repeat-length cuts. Together, these components turn an MFT-style bench from a mostly-accurate platform into a precision crosscut station, without replacing the bench.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDirect upgrade path for Festool MFT owners\u003c\/li\u003e\n\u003cli\u003eWorks on Kreg ACS, Benchdogs MFT, DIY benches\u003c\/li\u003e\n\u003cli\u003eEnds re-calibration frustration\u003c\/li\u003e\n\u003cli\u003eKeeps your existing bench investment\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/Core_ecad7c99-68fb-4e46-8a5b-8f1ebeedcea9.jpg?v=1783439491\" alt=\"Core MFT Bundle\"\u003e\u003c\/p\u003e\u003ch3\u003eA better value than buying the pieces separately.\u003c\/h3\u003e\u003cp\u003eBuying these components separately costs more than ordering them together. Choose the bundle and you'll pay less than the à la carte total, a built-in saving on a bundle that already represents the lowest-cost path into the Dash-Board accessory system. No quality compromise. No missing components. Every item in the bundle is identical to what ships in the individual product orders; the bundle simply gives buyers who know they want the core crosscut setup the best value.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCosts less than buying the components separately\u003c\/li\u003e\n\u003cli\u003eOne bundle, one checkout\u003c\/li\u003e\n\u003cli\u003eBuilt-in savings versus à la carte\u003c\/li\u003e\n\u003cli\u003eSame components, same quality, no additions needed\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/GRB_Action_Drop_8072a134-e3dd-42e9-8b3d-080c027285e1.jpg?v=1783439492\" alt=\"Core MFT Bundle\"\u003e\u003c\/p\u003e\u003ch3\u003eThe foundation. Build up from here.\u003c\/h3\u003e\u003cp\u003eThe Core MFT Bundle is the entry point into the Dash-Board accessory system. It covers crosscut accuracy and a basic rip setup with the included pair of SpiRail Dogs for Track Star registration. Once you've got the basics dialed in, the natural next additions are a pair of Parallel Guides and the Rip Gauge for stop setting on both sides of the blade. Beyond that, the Outrigger Bundle adds full-sheet processing, and the Pro Bundle adds Track Stars, fences, Door and Panel Supports, and the rest of the primary system. The Core MFT Bundle is where your upgrade begins.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLowest-cost entry into the Dash-Board system\u003c\/li\u003e\n\u003cli\u003eNatural next steps: Parallel Guides and Rip Gauge\u003c\/li\u003e\n\u003cli\u003eOther upgrades: Outrigger Bundle, Pro Bundle, Platinum Bundle\u003c\/li\u003e\n\u003cli\u003eBuy what you need now, expand later\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/Core_MFT_Bundle_1_a9540767-20e8-4fee-b0a0-c21923cda385.jpg?v=1783439491\" alt=\"Core MFT Bundle\"\u003e\u003c\/p\u003e\u003ch3\u003eMaximize your bench's crosscut capacity.\u003c\/h3\u003e\u003cp\u003eThe F2 Fence and Reversible Flip Stop in the Core MFT Bundle can mount directly on your bench top or on the included Track Stars to maximize the crosscut capacity of whatever bench you're using. Mount the fence inside the bench footprint for shorter parts. Move it to the Track Stars for crosscuts that exceed your bench's natural capacity. The included SpiRail Dogs let you register your guide rail off both the bench and the Track Stars, so the rail stays square through the full cut. Recommended guide rail length: width of your table plus 13\" (330mm) minimum.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFence mounts on bench top or Track Stars\u003c\/li\u003e\n\u003cli\u003eMaximizes crosscut capacity of any compatible bench\u003c\/li\u003e\n\u003cli\u003eIncludes 2 Track Stars for extended platform\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/Guide-Rail-Bracket-Set-7_60c6b4d5-ec1e-4031-9a52-a6825c7e0af9.jpg?v=1783439492\" alt=\"Core MFT Bundle\"\u003e\u003c\/p\u003e\u003ch3\u003eWhat's in the box:\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 Guide Rail Bracket Set\u003c\/li\u003e\n\u003cli\u003e2 Track Stars\u003c\/li\u003e\n\u003cli\u003e1 F2 Surface Mount Fence\u003c\/li\u003e\n\u003cli\u003e1 Reversible Flip Stop\u003c\/li\u003e\n\u003cli\u003e1 pair SpiRail Dogs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKey Features:\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMaximizes crosscut capacity of your table\u003c\/li\u003e\n\u003cli\u003eEasy setup and breakdown without tools\u003c\/li\u003e\n\u003cli\u003eRobust assembly for reliable performance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003e​​Compatibility — Track Saws \u0026amp; Rails\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFestool, Makita-style rails\u003c\/li\u003e\n\u003cli\u003eBosch and Mafell rails\u003c\/li\u003e\n\u003cli\u003eDeWalt and Metabo rails\u003c\/li\u003e\n\u003cli\u003ePowertec, Milwaukee, WEN, Grizzly\u003c\/li\u003e\n\u003cli\u003eImportant: The F2 works only with track saws that cut on the right side of the guide rail.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility — Workbenches\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDash-Board bench\u003c\/li\u003e\n\u003cli\u003eShortCut bench\u003c\/li\u003e\n\u003cli\u003eFestool MFT3 and 1080\u003c\/li\u003e\n\u003cli\u003eBenchdogs Ultra MFT\u003c\/li\u003e\n\u003cli\u003eKreg ACS (fence mounts on Track Stars on the side of the ACS only)\u003c\/li\u003e\n\u003cli\u003eTrackTubes\u003c\/li\u003e\n\u003cli\u003eT-slot extrusion tables (8mm slot)\u003c\/li\u003e\n\u003cli\u003eWood-frame tables with standard T-track\u003c\/li\u003e\n\u003cli\u003eDIY MFT-style benches\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003e\u003cb\u003eProduct Safety:\u003c\/b\u003e\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eBe mindful of pinch points\u003c\/li\u003e\n\u003cli\u003eSecure all hardware before use to avoid accidents or injury.\u003c\/li\u003e\n\u003cli\u003eUse appropriate lifting form to avoid injury\u003c\/li\u003e\n\u003cli\u003eKeep out of reach of children\u003c\/li\u003e\n\u003cli\u003eWorkbenches and Outriggers not intended as standing platforms\u003c\/li\u003e\n\u003cli\u003eFor safest operation please keep static loads below 300 lbs or 136 kg\u003c\/li\u003e\n\u003cli\u003eDisassembly or product alterations are not recommended\u003c\/li\u003e\n\u003cli\u003eDo not use products for uses other than intended\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the Core MFT Bundle?\u003c\/strong\u003e The Core MFT Bundle includes the foundational Dash-Board crosscut accessories: 1 Guide Rail Bracket Set (with 2 Universal Setup Blocks, 4 Medium Bench Dogs, and 1 SpiRail Dog), 2 Track Stars, 1 F2 Surface Mount Fence (54.75\"), 1 Reversible Flip Stop, and 1 pair of SpiRail Dogs. Together these components convert any compatible workbench into a precision crosscut platform with the option to expand into long rip workflows by adding Parallel Guides and the Rip Gauge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWill the Core MFT Bundle work on my Festool MFT3 or other non-Dash-Board bench?\u003c\/strong\u003e Yes, the Core MFT Bundle is specifically designed to upgrade non-Dash-Board benches that have a 20mm hole grid. Compatible benches include the Festool MFT3, Festool 1080, Benchdogs Ultra MFT, Kreg ACS, TrackTubes, T-slot extrusion tables (8mm slot), wood-frame tables with standard T-track, and DIY MFT-style benches. The bundle's name reflects its target audience, Festool MFT owners frustrated with stock hardware accuracy who want to upgrade without replacing their bench.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the difference between the Core MFT Bundle and the Pro Accessories Bundle?\u003c\/strong\u003e The Core MFT Bundle is the entry-level crosscut accessory kit, focused on Guide Rail Bracket accuracy, an F2 Fence, a Flip Stop, and 2 Track Stars. The Pro Accessories Bundle is the complete core Dash-Board accessory system: everything in the Core MFT Bundle plus an F1 Fence, an extra Flip Stop, 4 more Track Stars (6 total), 2 Parallel Guides, a Rip Gauge, a Wingman, 2 Door and Panel Supports, and 8 additional Bench Dogs. Choose Core MFT if you want the entry-level crosscut upgrade. Choose Pro if you want the complete core system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes the Core MFT Bundle save money versus buying components separately?\u003c\/strong\u003e The Core MFT Bundle costs less than buying the same components à la carte. The savings comes with no quality compromise, no missing components, and no substituted parts, every item in the bundle is identical to what ships in the individual product orders.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat should I add to the Core MFT Bundle to expand my capability?\u003c\/strong\u003e The most common upgrades to the Core MFT Bundle are a pair of Parallel Guides and the Rip Gauge, which together enable dimensional rip setting on both sides of the blade. After that, the natural expansion path is the Outrigger Bundle for full-sheet processing, then individual components like the F1 Fence and additional Track Stars or Flip Stops. If you find yourself adding most of the Pro Bundle's contents à la carte, ordering the Pro Bundle directly is usually a better value than building up from Core MFT.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dashboard PWS","offers":[{"title":"Default Title","offer_id":43569524834352,"sku":"CMB001-DASH","price":304.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4876\/8304\/files\/xlvesx93eeyh_a94ad519-84cb-4ebd-8ef2-3d49ba2b156c.jpg?v=1788561579"},{"product_id":"dashboard-mft-surface-mount-crosscut-fence-for-track-saw-benches-f10001-x7s29k","title":"Dashboard MFT Surface-Mount Crosscut Fence for Track Saw Benches (F10001)","description":"\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/sdscETsqIPE?si=eo2ACRw85nsdWuPw\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen\u003e\u003c\/iframe\u003e\u003ch2\u003eTrack Saw Crosscut Fence for Festool MFT \u0026amp; Guide Rail Benches\u003c\/h2\u003e\u003cp\u003eThe F1 Surface-Mount Fence gives track saw users a dead-square reference edge on a Festool MFT\/3, Dash-Board, ShortCut, or any 20mm-grid bench. It sets up in seconds for repeatable 90-degree crosscuts with Festool, Makita, Bosch, and Mafell guide rails, then stores flat when the job is done.\u003c\/p\u003e\u003ch3\u003eBuilt to work with the F2.\u003c\/h3\u003e\u003cp\u003eThe F1 is a 30-inch fence designed as a companion to the F2 Surface Mount Fence. While the F2 sets your primary reference edge for the workpiece, the F1 extends backing for your material on the right side of the blade. Add a Reversible Flip Stop to the F1 and you can set repeat dimensions on the right side of the blade in addition to the left, doubling your repeat-cut workflow.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e30\" (762mm) length, sized to support right-of-blade cuts\u003c\/li\u003e\n\u003cli\u003ePairs with the F2 for full reference and support\u003c\/li\u003e\n\u003cli\u003eAccepts the Reversible Flip Stop for right-side repeat cuts\u003c\/li\u003e\n\u003cli\u003eSame anodized aluminum extrusion as the F2\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/DPWS-9.2-new_corners-40Large_d7a0e677-f372-4830-ac47-995de49617be.jpg?v=1783439491\" alt=\"F1 Surface Mount Fence\"\u003e\u003c\/p\u003e\u003ch3\u003eMounts to any bench with 20mm holes.\u003c\/h3\u003e\u003cp\u003eThe F1 uses the same Fence Block system as the F2. Two sliding blocks come with each fence and slide along the extrusion to match whatever hole pattern your bench has. Drop them into 20mm holes, lock down with all-metal knobs, and the fence is set. Works on the Dash-Board, ShortCut, Festool MFT3, Kreg ACS, Benchdogs Ultra MFT, and any DIY MFT-style bench built on a 20mm grid.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2 sliding Fence Blocks included\u003c\/li\u003e\n\u003cli\u003eMounts to any grid of 20mm holes\u003c\/li\u003e\n\u003cli\u003eAll-metal knobs, tool-free installation\u003c\/li\u003e\n\u003cli\u003eAlso mounts on Track Stars for added crosscut capacity\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/F1_Fence_Thumbnail_ebd5b89c-9790-4126-a25c-1d6beb2cb889.png?v=1783439492\" alt=\"F1 Surface Mount Fence\"\u003e\u003c\/p\u003e\u003ch3\u003eWorks with every major track saw brand. Left or right of blade.\u003c\/h3\u003e\u003cp\u003eUnlike the F2, the F1 works with all major track saw and guide rail brands regardless of which side of the rail your blade cuts on. Festool, Makita-style rails, Bosch, Mafell, DeWalt, Metabo, Powertec, Milwaukee, WEN, and Grizzly. If you have a right-cutting saw, the F1 expands the F2's reference edge to the right. If you have a left-cutting saw, the F1 serves as your primary fence with the F2 supporting the right.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Festool, Makita, DeWalt, Bosch, Mafell\u003c\/li\u003e\n\u003cli\u003eAlso Metabo, Powertec, Milwaukee, WEN, Grizzly\u003c\/li\u003e\n\u003cli\u003eWorks regardless of blade side (left or right of rail)\u003c\/li\u003e\n\u003cli\u003eOne fence, every track saw in your shop\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/Guide-Rail-Bracket-Set-8_59703bc6-e127-45a1-bb83-fdc65d9982c1.jpg?v=1783439491\" alt=\"F1 Surface Mount Fence\"\u003e\u003c\/p\u003e\u003ch3\u003eAnodized aluminum. Built to live in your shop.\u003c\/h3\u003e\u003cp\u003eLike every Dash-Board accessory, the F1 is built from a proprietary anodized aluminum extrusion that resists wear, marking, and corrosion in shop and job-site conditions. Two rubber bumpers protect the fence and your floor when you stand it up between uses, so it stores easily against a wall without scratching paint or splintering wood. Built to be the last 30-inch fence you'll buy.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProprietary anodized aluminum extrusion\u003c\/li\u003e\n\u003cli\u003e2 rubber bumpers for vertical storage\u003c\/li\u003e\n\u003cli\u003eResistant to wear, corrosion, and shop conditions\u003c\/li\u003e\n\u003cli\u003eDesigned for long-term professional use\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/Bench_Closeup_1_0b1d326f-c80e-4cdd-be45-4f90bd063c3f.png?v=1783439496\" alt=\"F1 Surface Mount Fence\"\u003e\u003c\/p\u003e\u003ch3\u003eWhat’s in the box:\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 F1 Fence Extrusion\u003c\/li\u003e\n\u003cli\u003e2 Fence Blocks\u003c\/li\u003e\n\u003cli\u003e2 Rubber Bumpers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eMaterials:\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAnodized aluminum\u003c\/li\u003e\n\u003cli\u003eRubber bumpers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications:\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLength: 30” (762mm)\u003c\/li\u003e\n\u003cli\u003eWidth: 1.1” (28mm)\u003c\/li\u003e\n\u003cli\u003eHeight: 1.5” (38mm)​\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKey Features:\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEasily adjustable with no tools\u003c\/li\u003e\n\u003cli\u003eCompatible with any grid of 20mm holes\u003c\/li\u003e\n\u003cli\u003eSecurely mounts with our unique Fence Blocks\u003c\/li\u003e\n\u003cli\u003eCompatible with our Reversible Flip Stops for repeat cuts\u003c\/li\u003e\n\u003cli\u003eAlso mounts on Track Stars for added crosscut capacity\u003c\/li\u003e\n\u003cli\u003eRubber bumpers to protect fence and floor when stored standing up\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e​\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWorks with ALL track saws\/guide rails:\u003c\/b\u003e Festool\/Makita-style rails · Bosch\/Mafell rails · DeWalt\/Metabo rails · Powertec · Milwaukee · WEN · Grizzly \u003c\/p\u003e\u003cp\u003e​\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWorks with these workbenches: \u003c\/b\u003eAny workbench with 20mm holes\u003c\/p\u003e\u003ch4\u003eProduct Safety:\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eBe mindful of pinch points\u003c\/li\u003e\n\u003cli\u003eSecure all hardware before use to avoid accidents or injury.\u003c\/li\u003e\n\u003cli\u003eUse appropriate lifting form to avoid injury\u003c\/li\u003e\n\u003cli\u003eKeep out of reach of children\u003c\/li\u003e\n\u003cli\u003eWorkbenches and Outriggers not intended as standing platforms\u003c\/li\u003e\n\u003cli\u003eFor safest operation please keep static loads below 300 lbs or 136 kg\u003c\/li\u003e\n\u003cli\u003eDisassembly or product alterations are not recommended\u003c\/li\u003e\n\u003cli\u003eDo not use products for uses other than intended\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp style=\"color:transparent!important\"\u003e \u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the F1 Surface Mount Fence and what does it do?\u003c\/strong\u003e The F1 Surface Mount Fence is a 30-inch companion fence to the F2 in the Dash-Board system, designed to extend material support and stop placement on the right side of the blade during crosscuts. It mounts to any workbench with a 20mm hole grid using two sliding Fence Blocks, and accepts the Reversible Flip Stop for repeat-length cuts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the difference between the F1 and F2 Fences?\u003c\/strong\u003e The F2 is 54¾\" long and serves as the primary reference fence with three Fence Blocks. The F1 is 30\" long with two Fence Blocks and serves as the companion fence to the right of the blade, extending material support during longer crosscuts. The F2 works only with right-cutting saws, while the F1 works with both left- and right-cutting saws.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo I need the F1 if I already have the F2?\u003c\/strong\u003e You need the F1 when you regularly cut workpieces that hang off the right side of the bench during crosscuts, when you want to set repeat dimensions on the right side of the blade, or when you have a left-cutting track saw that needs primary fence support. The Fence Bundle saves significantly versus buying the F1 and F2 separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat workbenches is the F1 Fence compatible with?\u003c\/strong\u003e The F1 Fence is compatible with any workbench that has a 20mm hole grid, including the Dash-Board bench, ShortCut bench, Festool MFT3 and 1080, Benchdogs Ultra MFT, Kreg ACS, and DIY MFT-style benches. The included Fence Blocks slide along the fence extrusion to match any hole spacing and lock down with all-metal knobs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included with the F1 Surface Mount Fence?\u003c\/strong\u003e The F1 Surface Mount Fence includes one 30-inch anodized aluminum fence extrusion, two sliding Fence Blocks for tool-free mounting on any 20mm hole grid, and two rubber bumpers for vertical storage. Note that Gen 2 and Gen 1 Fences and Flip Stops cannot be mixed.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dashboard PWS","offers":[{"title":"Default Title","offer_id":43569524932656,"sku":"F10001-DASH","price":41.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4876\/8304\/files\/5mp41tf2ug0h_a417ac28-96d4-4ac9-ac2c-af94a1509546.jpg?v=1788561581"},{"product_id":"dashboard-mft-guide-rail-bracket-set-for-square-track-saw-crosscuts-grb001-c5emqc","title":"Dashboard MFT Guide Rail Bracket Set for Square Track Saw Crosscuts (GRB001)","description":"\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/_bhMrKGfeqc?si=OJZ5yybI9NP58aLa\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen\u003e\u003c\/iframe\u003e\u003ch2\u003eGuide Rail Squaring Brackets That Fix Festool MFT Crosscut Accuracy\u003c\/h2\u003e\u003cp\u003eThe Guide Rail Bracket Set solves the number-one Festool MFT complaint: guide rails that drift out of square and need constant re-calibration. These brackets lock your Festool, Makita, Bosch, Mafell, DeWalt, or Metabo rail to a repeatable 90 degrees, turning any 20mm-grid bench into a precision track saw crosscut station.\u003c\/p\u003e\u003ch3\u003eSet it once. Square crosscuts forever.\u003c\/h3\u003e\u003cp\u003eThe Guide Rail Bracket Set is the precision crosscut engine of the Dash-Board system. It hinges your guide rail from a fixed, repeatable 90-degree position so every crosscut lands exactly where the last one did. No more checking it's square before every cut. No more slop. No more wondering if the rail moved when you set down the saw. Verified buyers describe the brackets as significantly more rigid than the Festool hinge design, with multiple cabinet makers reporting complete elimination of the re-squaring step before each cut.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePatented design, refined over 10 years\u003c\/li\u003e\n\u003cli\u003eSmooth pivot mechanism with all-metal knobs\u003c\/li\u003e\n\u003cli\u003eIntegrated SpiRail Dogs simplify rail alignment\u003c\/li\u003e\n\u003cli\u003eOnce it's set, it stays set\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/GRB_Action_Drop_8072a134-e3dd-42e9-8b3d-080c027285e1.jpg?v=1783439492\" alt=\"Guide Rail Bracket Set\"\u003e\u003c\/p\u003e\u003ch3\u003eWorks with your track saw. Whatever you own.\u003c\/h3\u003e\u003cp\u003eThe Dash-Board Guide Rail Bracket Set is compatible with every major track saw and guide rail brand. Festool, Makita, DeWalt, Bosch, Mafell, Metabo, Powertec, Milwaukee, WEN, and Grizzly. The patented T-bar and T-bolt mounting systems (both included) attach to the bottom slot of any standard guide rail for the hinged bracket, and the included SpiRail Dog fits any guide rail to register on the front bracket.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Festool, Makita, DeWalt, Bosch, Mafell, Metabo, Powertec, Milwaukee, WEN, Grizzly\u003c\/li\u003e\n\u003cli\u003eBoth T-bar and T-bolt mounting hardware included\u003c\/li\u003e\n\u003cli\u003eSpiRail Dog included for universal rail registration\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/Guide-Rail-Bracket-Set-3_26df68aa-accb-46fe-82d9-085b0a7f9ff5.jpg?v=1783439491\" alt=\"Guide Rail Bracket Set\"\u003e\u003c\/p\u003e\u003ch3\u003eMounts to virtually any MFT-style bench.\u003c\/h3\u003e\u003cp\u003eThe Guide Rail Bracket Set isn't just for Dash-Board. It mounts to the Festool MFT3 and 1080, the Benchdogs Ultra MFT, the Kreg ACS, TrackTubes, T-slot extrusion tables with 8mm slots, and homemade DIY MFT tables built with T-tracks on their sides. Verified buyer reviews describe replacing the Festool rail hinge with the Dash-Board brackets as the upgrade that eliminated the constant re-squaring MFT3 owners commonly report.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDash-Board, ShortCut, Festool MFT3 and 1080\u003c\/li\u003e\n\u003cli\u003eBenchdogs Ultra MFT, Kreg ACS, TrackTubes\u003c\/li\u003e\n\u003cli\u003eT-slot extrusion tables (8mm slot)\u003c\/li\u003e\n\u003cli\u003eDIY MFT tables with side-mounted T-tracks\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/Guide-Rail-Bracket-Set-10_04d8d4c1-b46c-42d5-9226-40244c9c1128.jpg?v=1783439491\" alt=\"Guide Rail Bracket Set\"\u003e\u003c\/p\u003e\u003ch3\u003eOut of the way when you don't need it.\u003c\/h3\u003e\u003cp\u003eWhen the brackets are not in use, they drop conveniently below the bench top and stay there. They don't take up space on your work surface, they don't get in the way of clamping, and you don't need to remove them to use the bench for anything else. Maximum cutting height with the rail in position is 2.9\" (74mm), which handles 4\/4 through 12\/4 hardwood lumber, doubled-up sheet goods, and most face-frame and cabinet door stock.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDrops below table height when not in use\u003c\/li\u003e\n\u003cli\u003eMaximum cutting capacity: 2.9\" (74mm)\u003c\/li\u003e\n\u003cli\u003eHandles 4\/4 through 12\/4 hardwood\u003c\/li\u003e\n\u003cli\u003eTool-free deployment when you need them\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/Core_MFT_Bundle_3_b7e1f268-9ed6-4118-be77-2ecd3e783067.jpg?v=1783439491\" alt=\"Guide Rail Bracket Set\"\u003e\u003c\/p\u003e\u003ch3\u003eWhat's in the box:\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFront Bracket\u003c\/li\u003e\n\u003cli\u003eRear Bracket\u003c\/li\u003e\n\u003cli\u003e1 SpiRail Dog\u003c\/li\u003e\n\u003cli\u003e2 Universal Setup Blocks\u003c\/li\u003e\n\u003cli\u003e4 Bench Dogs — Medium (½\", 20mm)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKey Features:\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOptimized for strength, minimized weight, and maximized cut capacity\u003c\/li\u003e\n\u003cli\u003eSmooth pivot mechanism\u003c\/li\u003e\n\u003cli\u003eComfortable all-metal knobs\u003c\/li\u003e\n\u003cli\u003eIntegrated SpiRail Dogs simplify rail alignment\u003c\/li\u003e\n\u003cli\u003eT-bar mounting ensures quicker, easier, more solid attachment\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility — Track Saws \u0026amp; Rails\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFestool, Makita-style rails\u003c\/li\u003e\n\u003cli\u003eBosch and Mafell rails\u003c\/li\u003e\n\u003cli\u003eDeWalt and Metabo rails\u003c\/li\u003e\n\u003cli\u003ePowertec, Milwaukee, WEN, Grizzly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility — Workbenches\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDash-Board bench\u003c\/li\u003e\n\u003cli\u003eShortCut bench\u003c\/li\u003e\n\u003cli\u003eFestool MFT3 and 1080\u003c\/li\u003e\n\u003cli\u003eBenchdogs Ultra MFT\u003c\/li\u003e\n\u003cli\u003eKreg ACS\u003c\/li\u003e\n\u003cli\u003eTrackTubes\u003c\/li\u003e\n\u003cli\u003eT-slot extrusion tables (8mm slot)\u003c\/li\u003e\n\u003cli\u003eWood-frame tables with standard T-track\u003c\/li\u003e\n\u003cli\u003eDIY MFT tables with side-mounted T-tracks\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eRecommended rail length\u003c\/h3\u003e\u003cp\u003eWidth of table + 13” (330mm) minimum\n\u003c\/p\u003e\u003ch4\u003eProduct Safety:\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eBe mindful of pinch points\u003c\/li\u003e\n\u003cli\u003eSecure all hardware before use to avoid accidents or injury.\u003c\/li\u003e\n\u003cli\u003eUse appropriate lifting form to avoid injury\u003c\/li\u003e\n\u003cli\u003eKeep out of reach of children\u003c\/li\u003e\n\u003cli\u003eWorkbenches and Outriggers not intended as standing platforms\u003c\/li\u003e\n\u003cli\u003eFor safest operation please keep static loads below 300 lbs or 136 kg\u003c\/li\u003e\n\u003cli\u003eDisassembly or product alterations are not recommended\u003c\/li\u003e\n\u003cli\u003eDo not use products for uses other than intended​\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAre the Dash-Board Guide Rail Brackets compatible with my track saw?\u003c\/strong\u003e The Dash-Board Guide Rail Brackets are compatible with all major track saw and guide rail brands, including Festool, Makita, Bosch, Mafell, DeWalt, Metabo, Powertec, Milwaukee, WEN, and Grizzly. Both T-bar and T-bolt mounting hardware are included. Recommended minimum rail length is your table width plus 13\" (330mm).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWill the Dash-Board Guide Rail Brackets work on my Festool MFT3 or DIY MFT table?\u003c\/strong\u003e The Dash-Board Guide Rail Brackets work on the Festool MFT3 and 1080, Benchdogs Ultra MFT, Kreg ACS, TrackTubes, T-slot extrusion tables, and DIY MFT tables built with T-tracks on their sides. The kit includes 2 Universal Setup Blocks and 4 Bench Dogs to simplify squaring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the maximum cutting depth with the Dash-Board Guide Rail Brackets?\u003c\/strong\u003e The maximum cutting depth is 2.9\" (74mm), which handles 4\/4 through 12\/4 hardwood lumber, doubled-up sheet goods, and most face-frame and cabinet door stock. The brackets drop below table height when not in use so they never interfere with general bench work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow is the Dash-Board Guide Rail Bracket Set different from the Festool guide rail bracket?\u003c\/strong\u003e The Dash-Board brackets use all-metal construction and a tool-free T-bar mounting system. Verified buyer reviews describe them as significantly more rigid than Festool's hinge design, with multiple cabinetmakers reporting complete elimination of the re-squaring step before each cut.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the Dash-Board Guide Rail Bracket Set?\u003c\/strong\u003e The set includes one front and one rear bracket, 1 SpiRail Dog, 2 Universal Setup Blocks, and 4 Medium (½\") Bench Dogs. The brackets mount via T-bar or T-bolt attachment (both included), leaving the full work surface free.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dashboard PWS","offers":[{"title":"Default Title","offer_id":43569525030960,"sku":"GRB001-DASH","price":110.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4876\/8304\/files\/na08rov3urh0_8cc64b05-fd18-4416-a201-87b7ed4333ed.jpg?v=1788561586"},{"product_id":"dashboard-mft-crosscut-fence-bundle-for-track-saw-benches-fb0001-r130q1","title":"Dashboard MFT Crosscut Fence Bundle for Track Saw Benches (FB0001)","description":"\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/BgD95FpDdoE?si=pKQAzUz8Y9XPr-i7\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen\u003e\u003c\/iframe\u003e\u003ch2\u003eComplete Track Saw Fence System for Festool MFT-Style Benches\u003c\/h2\u003e\u003cp\u003eThe Fence Bundle pairs the F1 and F2 Surface-Mount Fences into a complete crosscut and miter system for Festool MFT, Dash-Board, ShortCut, and other 20mm-grid benches. It covers square crosscuts, miters, and repeatable stops in one purchase for track saw owners running Festool, Makita, Bosch, or Mafell rails.\u003c\/p\u003e\u003ch3\u003eThe full Dash-Board fence system. One order.\u003c\/h3\u003e\u003cp\u003eThe Fence Bundle gives you everything you need to set up a complete fence system on any compatible workbench. The 54¾\" F2 Fence sets your primary reference edge for crosscuts, rips, and miter setups. The 30\" F1 Fence extends material support and stop placement to the right side of the blade. The two Reversible Flip Stops let you set repeat-length cuts on either fence, on either side of the blade. Together this is the workflow that turns a bench into a production crosscut platform.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1 F2 Surface Mount Fence (54¾\" primary reference)\u003c\/li\u003e\n\u003cli\u003e1 F1 Surface Mount Fence (30\" right-of-blade companion)\u003c\/li\u003e\n\u003cli\u003e2 Reversible Flip Stops for repeat-length cuts\u003c\/li\u003e\n\u003cli\u003eStop-setting capacity on both sides of the blade\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/fence-bundle-hero_bd1d7911-013b-44a8-93a0-622f596230f7.jpg?v=1783439493\" alt=\"Fence Bundle\"\u003e\u003c\/p\u003e\u003ch3\u003eA better value than buying the pieces separately.\u003c\/h3\u003e\u003cp\u003eBuying these components separately costs more than ordering them together. Choose the bundle and you'll pay less than the à la carte total, a built-in saving on the complete fence and flip stop setup. Same F1 and F2 fences. Same Reversible Flip Stops. Same anodized aluminum extrusion and machined parts that ship in every individual product order. The bundle gives buyers who know they want both fences plus the flip stops the best value on the complete kit.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCosts less than buying the components separately\u003c\/li\u003e\n\u003cli\u003eOne bundle, one checkout\u003c\/li\u003e\n\u003cli\u003eBuilt-in savings versus à la carte\u003c\/li\u003e\n\u003cli\u003eSame components, same quality, no substitutions\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/Bench_Closeup_1_0b1d326f-c80e-4cdd-be45-4f90bd063c3f.png?v=1783439496\" alt=\"Fence Bundle\"\u003e\u003c\/p\u003e\u003ch3\u003eWorks on the bench you already own.\u003c\/h3\u003e\u003cp\u003eThe Fence Bundle mounts to any workbench with a 20mm hole grid using the included sliding Fence Blocks. The F2 ships with 3 blocks, the F1 ships with 2. Drop the blocks into 20mm holes, lock down with all-metal knobs, and the fence is set. Works on the Dash-Board, ShortCut, Festool MFT3, Festool 1080, Benchdogs Ultra MFT, Kreg ACS (mount on Track Stars on the side of the ACS), TrackTubes, T-slot extrusion tables (8mm slot), and DIY MFT-style benches.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDash-Board, ShortCut, Festool MFT3, Festool 1080\u003c\/li\u003e\n\u003cli\u003eBenchdogs Ultra MFT, TrackTubes\u003c\/li\u003e\n\u003cli\u003eDIY benches with 20mm hole grid\u003c\/li\u003e\n\u003cli\u003eKreg ACS only when fence is mounted on Track Stars\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/fence-bundle-on-diy_21a3a7a6-7605-42df-b075-52c3d74abd14.jpg?v=1783439494\" alt=\"Fence Bundle\"\u003e\u003c\/p\u003e\u003ch3\u003eSet the dimension once. Run the batch.\u003c\/h3\u003e\u003cp\u003eThe pairing of two fences and two Flip Stops is what makes this bundle a true production accessory. Position the F2 as your primary reference. Position the F1 to extend support right of the blade. Set a Flip Stop on the F2 for your repeat length, set another on the F1 for a secondary dimension, then flip either out of the way when you need a one-off cut. Same registration, same workflow, just rotated. This is the configuration cabinet makers and finish carpenters use to cut entire batches without re-measuring between parts.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2 Flip Stops for 2 simultaneous dimensions\u003c\/li\u003e\n\u003cli\u003eFlip up out of the way for one-off cuts without losing settings\u003c\/li\u003e\n\u003cli\u003ePairs with the Rip Gauge for kerf-corrected stop setting\u003c\/li\u003e\n\u003cli\u003eMounts on Track Stars for extended crosscut capacity\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/Shortcut_4_3cad6885-4905-4de1-b301-a33abfff51b3.jpg?v=1783439491\" alt=\"Fence Bundle\"\u003e\u003c\/p\u003e\u003ch3\u003eWhat's In The Box:\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 F2 Surface Mount Fence (with 3 Fence Blocks, 1 rubber bumper)\u003c\/li\u003e\n\u003cli\u003e1 F1 Surface Mount Fence (with 2 Fence Blocks, 2 rubber bumpers)\u003c\/li\u003e\n\u003cli\u003e2 Reversible Flip Stops\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications — F2 Fence\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLength: 54¾\" (1390mm)\u003c\/li\u003e\n\u003cli\u003eWidth: 1.1\" (28mm)\u003c\/li\u003e\n\u003cli\u003eHeight: 1.5\" (38mm)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications — F1 Fence\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLength: 30\" (762mm)\u003c\/li\u003e\n\u003cli\u003eWidth: 1.1\" (28mm)\u003c\/li\u003e\n\u003cli\u003eHeight: 1.5\" (38mm)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eMaterials:\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFences: Anodized aluminum\u003c\/li\u003e\n\u003cli\u003eBumpers: Rubber\u003c\/li\u003e\n\u003cli\u003eKnobs: All-metal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKey Features:\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAdjustable to any angle\u003c\/li\u003e\n\u003cli\u003eCompatible with any grid of 20mm holes\u003c\/li\u003e\n\u003cli\u003eEasily and securely mounts with our unique Fence Blocks\u003c\/li\u003e\n\u003cli\u003eF2 Tongue section slips under the guide rail for support near the cut line\u003c\/li\u003e\n\u003cli\u003eCompatible with our Reversible Flip Stops for repeat cuts\u003c\/li\u003e\n\u003cli\u003eFences also mount on Track Stars for added crosscut capacity\u003c\/li\u003e\n\u003cli\u003eRubber bumper to protect fence and floor when stored standing up\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility — Track Saws \u0026amp; Rails\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFestool, Makita-style rails\u003c\/li\u003e\n\u003cli\u003eBosch and Mafell rails\u003c\/li\u003e\n\u003cli\u003eDeWalt and Metabo rails\u003c\/li\u003e\n\u003cli\u003ePowertec, Milwaukee, WEN, Grizzly\u003c\/li\u003e\n\u003cli\u003eImportant: The F2 works only with track saws that cut on the right side of the guide rail. The F1 works with both left- and right-cutting saws.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility — Workbenches\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDash-Board bench\u003c\/li\u003e\n\u003cli\u003eShortCut bench\u003c\/li\u003e\n\u003cli\u003eFestool MFT3 and 1080\u003c\/li\u003e\n\u003cli\u003eBenchdogs Ultra MFT\u003c\/li\u003e\n\u003cli\u003eKreg ACS (fences mount on Track Stars on the side of the ACS only)\u003c\/li\u003e\n\u003cli\u003eTrackTubes\u003c\/li\u003e\n\u003cli\u003eT-slot extrusion tables (8mm slot)\u003c\/li\u003e\n\u003cli\u003eWood-frame tables with standard T-track\u003c\/li\u003e\n\u003cli\u003eDIY MFT-style benches\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eRecommended Guide Rail Length\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eBench width + 13\" (330mm) minimum\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eCritical Generation Note:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eGen 2 and Gen 1 Fences and Flip Stops cannot be mixed. This bundle contains Gen 2 components. Verify your existing fence and flip stop generations before mixing with the bundle contents.\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003e\u003cb\u003eProduct Safety:\u003c\/b\u003e\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eBe mindful of pinch points\u003c\/li\u003e\n\u003cli\u003eSecure all hardware before use to avoid accidents or injury.\u003c\/li\u003e\n\u003cli\u003eUse appropriate lifting form to avoid injury\u003c\/li\u003e\n\u003cli\u003eKeep out of reach of children\u003c\/li\u003e\n\u003cli\u003eWorkbenches and Outriggers not intended as standing platforms\u003c\/li\u003e\n\u003cli\u003eFor safest operation please keep static loads below 300 lbs or 136 kg\u003c\/li\u003e\n\u003cli\u003eDisassembly or product alterations are not recommended\u003c\/li\u003e\n\u003cli\u003eDo not use products for uses other than intended\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the Fence Bundle?\u003c\/strong\u003e The Fence Bundle includes 1 F2 Surface Mount Fence (54¾\" primary reference fence with 3 Fence Blocks), 1 F1 Surface Mount Fence (30\" right-of-blade companion with 2 Fence Blocks), and 2 Reversible Flip Stops. Together, these components give you a complete crosscut fence system with stop-setting capacity on both sides of the blade. Ordering them together costs less than buying each piece à la carte.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIs the Fence Bundle compatible with my track saw?\u003c\/strong\u003e The F2 Fence works only with track saws that cut on the right side of the guide rail, including Festool, Makita-style rails, Bosch, Mafell, DeWalt, Metabo, Powertec, Milwaukee, WEN, and Grizzly. The F1 Fence works with both left- and right-cutting saws. Verify your saw's blade position before purchase. If you own a left-cutting saw, the F1 alone can serve as your primary fence, and the F2 included in the bundle becomes a secondary or backup fence.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat workbenches is the Fence Bundle compatible with?\u003c\/strong\u003e The Fence Bundle is compatible with any workbench that has a 20mm hole grid, including the Dash-Board bench, ShortCut bench, Festool MFT3 and 1080, Benchdogs Ultra MFT, Kreg ACS, TrackTubes, T-slot extrusion tables with 8mm slot, wood-frame tables with standard T-track, and DIY MFT-style benches. Note: Kreg ACS customers must mount the fences on Track Stars on the side of the ACS rather than the main bench top.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWill the Fence Bundle components mix with my Gen 1 fences or Flip Stops?\u003c\/strong\u003e No. The Fence Bundle contains Gen 2 fences and Flip Stops. Gen 2 and Gen 1 fences and Flip Stops cannot be mixed because of mechanical and dimensional differences between the two generations. If you currently own Gen 1 fences or Flip Stops, you'll need to keep the two generations separate — you cannot use a Gen 1 Flip Stop on a Gen 2 fence or vice versa. Verify your generation before purchase.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat should I add to the Fence Bundle for the complete crosscut workflow?\u003c\/strong\u003e The Fence Bundle handles the fence and flip stop portion of the crosscut workflow. To complete the system, add the Guide Rail Bracket Set for the precision crosscut hinge that registers your guide rail square to the fence every time. For dimensional rip workflows, also add Parallel Guides and the Rip Gauge.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dashboard PWS","offers":[{"title":"Default Title","offer_id":43569525162032,"sku":"FB0001-DASH","price":139.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4876\/8304\/files\/qctwyoty72a3_429ca8ae-961a-4378-a492-775ff89e5048.jpg?v=1788561589"},{"product_id":"festool-578623-fs-ez-150-2-one-handed-trigger-clamp-5-7-8-in-capacity-2-pack-itx8io","title":"Festool 578623 FS-EZ 150\/2 One-Handed Trigger Clamp 5-7\/8-in. Capacity, 2-Pack","description":"\u003csection data-aplus\u003e\u003cdetails id=\"product-features\" class=\"acc\" open\u003e\u003csummary\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003c\/summary\u003e\u003cdiv class=\"acc-body\"\u003e \u003cdiv class=\"features\"\u003e \u003cdiv class=\"card\"\u003e\n\u003cdiv class=\"card-inside\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/handle.svg\" alt=\"handle\" class=\"aplusicon\"\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eOne-Hand Control\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"feature-card\"\u003eThe pump lever and built-in release let you clamp, adjust, and remove the Festool FS-EZ 150\/2 One-Handed Clamp with one hand. That matters when your other hand is holding a guide rail, panel, or workpiece in position.\u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"card\"\u003e\n\u003cdiv class=\"card-inside\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/tool-free-change.svg\" alt=\"tool-free-change\" class=\"aplusicon\"\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eClamp or Spread\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"feature-card\"\u003eTool-free conversion lets the same clamp handle standard clamping, overlap clamping, and spreading. Instead of reaching for different accessories, you can reconfigure it fast and keep moving.\u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"card\"\u003e\n\u003cdiv class=\"card-inside\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/compatibility.svg\" alt=\"specs\" class=\"aplusicon\"\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eBuilt for Festool Rails\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"feature-card\"\u003eThis one-handed clamp is made to fit the clamping grooves on Festool guide rails, MFT 3, and the MW 1000 Mobile Workshop. It gives you a secure hold for guided cutting, positioning, and table work without fighting setup.\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e\n\u003c\/div\u003e\u003c\/details\u003e\u003cdetails id=\"product-overview\" class=\"acc\" open\u003e\u003csummary\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003c\/summary\u003e\u003cdiv class=\"acc-body\" data-product-summary\u003e \u003cp\u003eThe \u003cstrong\u003eFestool FS-EZ 150\/2 One-Handed Clamp\u003c\/strong\u003e, model \u003cstrong\u003e578623\u003c\/strong\u003e, is a compact clamping accessory made for securing Festool guide rails, workpieces, and MFT table setups with less fuss. This is a \u003cstrong\u003eone-handed clamp designed for fastening guide rails, holding workpieces, and spreading material when needed\u003c\/strong\u003e. If you use Festool rails for track saw work, cross cutting, or repeatable layout on an MFT table, this clamp gives you a faster way to lock things down without tying up both hands.\u003c\/p\u003e \u003cp\u003eWhat makes this clamp useful is not just the 6 inch clamping width. It is the fact that it can also switch over to spreading, with a spreading range from 4-3\/4 inches to 12-3\/16 inches. That means the same accessory can hold a rail in place for cutting sheet goods, secure a part on the table, or push material apart during fitting and assembly. For a small accessory, that kind of range makes it a legitimate everyday shop and jobsite piece rather than a one-task add-on.\u003c\/p\u003e \u003cp\u003eThe one-handed pump action is the real selling point here. When you are setting a guide rail on plywood or trying to keep a workpiece aligned on an MFT top, having one hand free matters. Festool built in an ergonomic pump lever along with an integrated release lever, so clamping and repositioning are quick from either direction. In plain terms, you can hold the material where you want it and still get the clamp engaged without asking for a second set of hands.\u003c\/p\u003e \u003cp\u003eFestool also gave the FS-EZ 150\/2 a tool-free conversion setup. You can reposition the jaw to go from clamping to spreading without digging around for extra hardware or wasting time in the middle of a setup. It also supports overlap clamping, which adds flexibility when you need to secure material in less straightforward positions. That is the kind of detail that makes sense for cabinet work, trim fitting, and track saw cutting where setups change constantly.\u003c\/p\u003e \u003cp\u003eOn the contact points, the plastic protective cap is there for a reason. It helps keep the hold from slipping while being gentler on finished surfaces and workpieces you do not want chewed up by bare clamp faces. That makes this clamp a better fit for finished panels, veneered stock, laminate, and other materials where damage at the clamp point creates cleanup work later.\u003c\/p\u003e \u003cp\u003eSystem compatibility is a big part of the value. The clamp is suitable for the clamping groove of all Festool guide rails, including FS\/2, FS\/2-KP, and FSK, and it also works with the MFT 3 and MW 1000 Mobile Workshop. If your workflow already revolves around the Festool guide rail system, this is one of those accessories that helps the whole setup work the way it is supposed to. It is not a generic trigger clamp trying to do rail duty. It is made for the slots and grooves you are actually using.\u003c\/p\u003e \u003cp\u003eBecause this is sold as a 2-pack, you can secure both ends of a rail or keep two hold points on a workpiece without buying duplicates later. For guided cutting, that is the practical advantage. One clamp is better than none, but two clamps are what give you stable, repeatable positioning when accuracy matters.\u003c\/p\u003e \u003cp\u003eWho should buy it? Woodworkers, cabinet installers, finish carpenters, remodelers, and serious DIY users already using Festool guide rails or an MFT table will get the most from it. If you do not own the Festool rail and table system, it is still a capable clamp and spreader, but the real reason to buy the \u003cstrong\u003eFestool FS-EZ 150\/2 One-Handed Clamp\u003c\/strong\u003e is how cleanly it integrates into that system for controlled cutting, clamping, and setup work.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/details\u003e\u003cdetails id=\"product-benefits-1\" class=\"acc\"\u003e\u003csummary\u003e\u003ch2\u003eSecure Your Guide Rail Faster\u003c\/h2\u003e\u003c\/summary\u003e\u003cdiv class=\"acc-body\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"img\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/50898467619110_028cbb30601a.jpg\" alt=\"Festool FS-EZ 150\/2 One-Handed Clamp securing a guide rail on an MFT work table while cutting a wood workpiece in a shop setup\" class=\"tnblock-img\"\u003e \u003c\/div\u003e \u003cdiv class=\"copy\"\u003e\n\u003cp\u003eWhen you are setting up for guided cutting, the clamp should help the job, not slow it down. This setup shows exactly where the FS-EZ 150\/2 earns its keep: holding the rail where you want it while you keep moving.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOne-handed operation helps when the other hand is positioning the rail or material\u003c\/li\u003e\n\u003cli\u003eDesigned for secure clamping and positioning of FS\/2, FS\/2-KP, and FSK guide rails\u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/div\u003e \u003c\/div\u003e\n\u003c\/div\u003e\u003c\/details\u003e\u003cdetails id=\"product-benefits-2\" class=\"acc flip\"\u003e\u003csummary\u003e\u003ch2\u003eFits the Festool Table System the Right Way\u003c\/h2\u003e\u003c\/summary\u003e\u003cdiv class=\"acc-body\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"img\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/50898467619110_62c9b2d3317d.jpg\" alt=\"Festool FS-EZ 150\/2 One-Handed Clamp locked into the groove of an MFT work table holding a wood board for precise positioning\" class=\"tnblock-img\"\u003e \u003c\/div\u003e \u003cdiv class=\"copy\"\u003e\n\u003cp\u003eThis clamp is made to work in the side groove of the MFT 3 and Mobile Workshop, which means less improvising and a more stable setup. For layout, trimming, and repeat work, that gives you better control from the start.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with MFT 3 and MW 1000 Mobile Workshop clamping grooves\u003c\/li\u003e\n\u003cli\u003eUseful for securing workpieces directly on the table during assembly, trimming, or guided cuts\u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/div\u003e \u003c\/div\u003e\n\u003c\/div\u003e\u003c\/details\u003e\u003cdetails id=\"product-benefits-3\" class=\"acc\"\u003e\u003csummary\u003e\u003ch2\u003eMore Than Just a Rail Clamp\u003c\/h2\u003e\u003c\/summary\u003e\u003cdiv class=\"acc-body\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"img\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/50898467619110_936ab5e3ad0e.jpg\" alt=\"Festool FS-EZ 150\/2 One-Handed Clamp attached under a guide rail and table setup holding sheet material in a workshop environment\" class=\"tnblock-img\"\u003e \u003c\/div\u003e \u003cdiv class=\"copy\"\u003e\n\u003cp\u003eThe FS-EZ 150\/2 is more flexible than a basic trigger clamp. Tool-free conversion lets you switch between clamping, overlap clamping, and spreading, so the same pair can cover setup jobs that usually need more than one type of clamp.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eClamping width up to 6 in. (150 mm)\u003c\/li\u003e\n\u003cli\u003eSpreading width from 4-3\/4 in. to 12-3\/16 in. (120 to 310 mm)\u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/div\u003e \u003c\/div\u003e\n\u003c\/div\u003e\u003c\/details\u003e\u003cdetails id=\"product-benefits-4\" class=\"acc flip\"\u003e\u003csummary\u003e\u003ch2\u003eCompact Design, Everyday Use\u003c\/h2\u003e\u003c\/summary\u003e\u003cdiv class=\"acc-body\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"img\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/50898467619110_5c6f7ed0b34e.jpg\" alt=\"Festool FS-EZ 150\/2 One-Handed Clamp product view showing compact trigger clamp design for guide rail and workholding tasks\" class=\"tnblock-img\"\u003e \u003c\/div\u003e \u003cdiv class=\"copy\"\u003e\n\u003cp\u003eCompact clamps tend to become the ones you grab all the time, especially when they are fast and do not beat up the work. The protective cap and ergonomic handle make this a better choice for finished material and repeated setups.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePlastic protective cap helps prevent slipping and reduces marring on the workpiece\u003c\/li\u003e\n\u003cli\u003eErgonomic pump lever with integrated release lever allows quick adjustment and removal\u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/div\u003e \u003c\/div\u003e\n\u003c\/div\u003e\u003c\/details\u003e\u003cdetails id=\"product-whats-included\" class=\"acc\" open\u003e\u003csummary\u003e\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\u003c\/summary\u003e\u003cdiv class=\"acc-body\"\u003e \u003cdiv class=\"tnincluded-wrapper\"\u003e \u003cul\u003e\n\u003cli\u003e(2) Festool FS-EZ 150\/2 One-Handed Clamps\u003c\/li\u003e \u003c\/ul\u003e \u003c\/div\u003e\n\u003c\/div\u003e\u003c\/details\u003e\u003cdetails id=\"product-key-specifications\" class=\"acc\" open\u003e\u003csummary\u003e\u003ch2\u003eKey Specifications\u003c\/h2\u003e\u003c\/summary\u003e\u003cdiv class=\"acc-body\"\u003e \u003ctable class=\"aplusspecs\"\u003e \u003ctr\u003e\n\u003cth\u003eClamping Width\u003c\/th\u003e\n\u003ctd\u003e6 in. (150 mm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eSpreading Width\u003c\/th\u003e\n\u003ctd\u003e4-3\/4 in. - 12-3\/16 in. (120 - 310 mm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eQuantity\u003c\/th\u003e\n\u003ctd\u003e2-piece set\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eTool Type\u003c\/th\u003e\n\u003ctd\u003eOne-handed clamp\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003ctd\u003eClamping, overlap clamping, and spreading\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eWeight (lbs)\u003c\/th\u003e\n\u003ctd\u003e1.75 lbs\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eMade In\u003c\/th\u003e\n\u003ctd\u003eUnited States\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eModel Number\u003c\/th\u003e\n\u003ctd\u003e578623\u003c\/td\u003e \u003c\/tr\u003e \u003c\/table\u003e\n\u003c\/div\u003e\u003c\/details\u003e\u003cdetails id=\"product-compatibility\" class=\"acc\"\u003e\u003csummary\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003c\/summary\u003e\u003cdiv class=\"acc-body\"\u003e \u003cdiv class=\"compat-list\"\u003e \u003cdiv class=\"compat-row\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/connectivity.svg\" alt=\"connectivity\" class=\"icon-sm\"\u003e\u003cdiv\u003e\n\u003cstrong\u003eGuide Rail System\u003c\/strong\u003e\u003cdiv class=\"compat-detail\"\u003eSuitable for Festool FS\/2, FS\/2-KP, and FSK guide rails.\u003c\/div\u003e\n\u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"compat-row\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/toolbox.svg\" alt=\"toolbox\" class=\"icon-sm\"\u003e\u003cdiv\u003e\n\u003cstrong\u003eWork Tables\u003c\/strong\u003e\u003cdiv class=\"compat-detail\"\u003eFits the clamping groove of the Festool MFT 3 and MW 1000 Mobile Workshop.\u003c\/div\u003e\n\u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"compat-row\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/specs.svg\" alt=\"specs\" class=\"icon-sm\"\u003e\u003cdiv\u003e\n\u003cstrong\u003eWorkholding Use\u003c\/strong\u003e\u003cdiv class=\"compat-detail\"\u003eCan be configured for standard clamping, overlap clamping, and spreading depending on the setup.\u003c\/div\u003e\n\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e\n\u003c\/div\u003e\u003c\/details\u003e\u003cdetails id=\"product-applications-uses\" class=\"acc\"\u003e\u003csummary\u003e\u003ch2\u003eBuilt For\u003c\/h2\u003e\u003c\/summary\u003e\u003cdiv class=\"acc-body\"\u003e \u003cdiv class=\"tags\"\u003e \u003cspan class=\"tag\"\u003eWoodworking\u003c\/span\u003e \u003cspan class=\"tag\"\u003eCabinet Installation\u003c\/span\u003e \u003cspan class=\"tag\"\u003eFinish Carpentry\u003c\/span\u003e \u003cspan class=\"tag\"\u003eRemodeling\u003c\/span\u003e \u003cspan class=\"tag\"\u003eTrack Saw Cutting\u003c\/span\u003e \u003cspan class=\"tag\"\u003eMFT Table Setups\u003c\/span\u003e \u003cspan class=\"tag\"\u003eWorkpiece Positioning\u003c\/span\u003e \u003cspan class=\"tag\"\u003eDIY \/ Hobbyist\u003c\/span\u003e \u003c\/div\u003e\n\u003c\/div\u003e\u003c\/details\u003e\u003cdetails id=\"product-pro-tips\" class=\"acc\"\u003e\u003csummary\u003e\u003ch2\u003ePro Tip\u003c\/h2\u003e\u003c\/summary\u003e\u003cdiv class=\"acc-body\"\u003e \u003cdiv class=\"tip-row\"\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/specs.svg\" alt=\"specs\" class=\"icon-lg\"\u003e \u003cp class=\"tip-text\"\u003eIf you are clamping a guide rail for sheet goods, use both clamps as a pair instead of relying on one end. You will get a more stable rail, especially on longer cuts, and spend less time checking whether the rail shifted during setup.\u003c\/p\u003e \u003c\/div\u003e\n\u003c\/div\u003e\u003c\/details\u003e\u003cdetails id=\"product-warranty\" class=\"acc\"\u003e\u003csummary\u003e\u003ch2\u003eWarranty \u0026amp; Support\u003c\/h2\u003e\u003c\/summary\u003e\u003cdiv class=\"acc-body\"\u003e \u003cdiv class=\"warranty-row\"\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/warranty.svg\" alt=\"warranty\" class=\"icon-sm\"\u003e \u003cdiv class=\"warranty-text\"\u003e No manufacturer's warranty is listed for this product in the available product data. \u003c\/div\u003e \u003c\/div\u003e\n\u003c\/div\u003e\u003c\/details\u003e\u003cdetails id=\"product-tool-nut-take\" class=\"acc\"\u003e\u003csummary\u003e\u003ch2\u003eTool Nut's Take\u003c\/h2\u003e\u003c\/summary\u003e\u003cdiv class=\"acc-body\"\u003e \u003cdiv class=\"eyebrow\"\u003eTool Nut's Take\u003c\/div\u003e \u003ch3\u003eFestool FS-EZ 150\/2 One-Handed Clamp That Actually Makes the System Better\u003c\/h3\u003e \u003cp\u003eIf you already work off Festool rails or an MFT table, this is one of those accessories that feels optional until you use it, then it stays in the setup full time.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eWho it's for:\u003c\/strong\u003e Woodworkers, cabinet guys, trim carpenters, and serious DIY users who want faster guide rail fastening and cleaner MFT workholding.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eWhy it stands out:\u003c\/strong\u003e The one-handed action is genuinely useful, and the clamp-to-spreader conversion gives this pair more range than a basic rail clamp.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eWorth knowing:\u003c\/strong\u003e The real value is system fit. If you own Festool rails, MFT 3, or the mobile workshop, you will get more out of it than someone looking for a generic shop clamp.\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/div\u003e\u003c\/details\u003e\u003cdetails id=\"product-faqs\" class=\"acc\"\u003e\u003csummary\u003e\u003ch2\u003eCommon Questions\u003c\/h2\u003e\u003c\/summary\u003e\u003cdiv class=\"acc-body\"\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eWhat does this clamp fit?\u003c\/strong\u003e It is suitable for Festool FS\/2, FS\/2-KP, and FSK guide rails, plus the clamping groove on the MFT 3 and MW 1000 Mobile Workshop.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eCan it be used for spreading as well as clamping?\u003c\/strong\u003e Yes. The clamp can be converted tool-free for clamping, overlap clamping, and spreading.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eWhat is the maximum clamping capacity?\u003c\/strong\u003e The clamping width is 6 inches (150 mm).\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eWhat is the spreading range?\u003c\/strong\u003e The spreading width ranges from 4-3\/4 inches to 12-3\/16 inches (120 to 310 mm).\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/div\u003e\u003c\/details\u003e\u003c\/section\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":43570221252656,"sku":"578623","price":14.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4876\/8304\/files\/io74s48ume1c_f8ae52c5-57c8-4768-bc18-d1aabed22fd0.jpg?v=1788576783"},{"product_id":"woodpeckers-mftposdog2-19-mft-positioning-dogs-2-pack-gcmtgq","title":"Woodpeckers MFTPOSDOG2-19 MFT Positioning Dogs, 2-Pack","description":"\u003cp\u003e\u003cstrong\u003eProduct Summary\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003ch1 dir=\"ltr\"\u003eMFT LAYOUT \u0026amp; ASSEMBLY SQUARE \u003c\/h1\u003e \u003cp dir=\"ltr\"\u003e\u003cstrong\u003eThe MFT Layout \u0026amp; Assembly Square \u003c\/strong\u003e\u003cspan\u003eis perfect for squaring up your MFT, but we also designed it for other jobs in your shop. Slots are milled into the phenolic along both edges. This lets you clamp the square to your MFT (or any workbench, for that matter) and then your workpiece to the square. Now your work is perpendicular to the work surface. You can also clamp the square to two joining workpieces, holding them perpendicular to each other. If you use it to square up your work during assembly, don’t worry if you get a little too generous with the glue…in won’t stick to the square.  \u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eLarge Machinery Set-Up\u003c\/strong\u003e Tired of setting up resaw cuts with a small square\" The Layout \u0026amp; Assembly Square gives you a generous 15 inches on each side and the 3\/4\" width keeps the square upright while you use both hands for adjustments. At the table saw, the extra length lets you span your saw blade from front to back while setting up your miter gauge. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eKeep Your MFT Square\u003c\/strong\u003e Technically, your fence and guide rail don’t have to be square to the holes in your MFT top to give you square cuts. But anyone who has used the system knows that it can be reassuring when everything lines up and you can use your stops and hold downs in conjunction with the fence. The MFT Layout and Assembly Square comes with two 20mm location dogs. Drop them in any two holes in an MFT table top and your square is correctly aligned with all the holes. Now set your guide rail and fence to the square and everyone is on the same page of the playbook.\u003c\/p\u003e \u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWoodpeckers Precision and Quality\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e.\u003c\/strong\u003e We meticulously machine the MFT Layout \u0026amp; Assembly Square from a nearly indestructible solid phenolic. It’s the same material we use for our top-of-the-line router tables. It won’t warp or twist and it is completely impervious to moisture. The location pins are turned on state-of-the-art CNC lathes and anodized to give them our familiar “Woodpecker Red” color and a tough finish.\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan id=\"docs-internal-guid-72c458e8-7fff-51e0-0e67-910daa70e276\"\u003e\u003cspan\u003eL\u003c\/span\u003e\u003cspan\u003eike all Woodpeckers tools\u003c\/span\u003e\u003cspan\u003e, this former \u003c\/span\u003e\u003cspan\u003eOneTIME Tool\u003c\/span\u003e\u003cspan\u003e®\u003c\/span\u003e\u003cspan\u003e is precisely built and carefully inspected in our Strongsville, Ohio factory. For a limited time, you can take advantage of introductory pricing and get your tool from the first permanent product production run. Don’t wait, introductory pricing ends soon. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWoodpeckers MFT Layout \u0026amp; Assembly Square\u003c\/strong\u003e makes quick work of the often-tedious task of aligning your track saw guide rail with the fence of your Festool Multi-Function Table. At 3\/4\" thick, this solid phenolic square can rest flat on the table and intersect with both the fence and the rail at the same time. No more trying to hold a framing square along the guide rail and hoping you’ve got it aligned. If that was this tool’s only trick, it would be a great addition your shop, but there’s more.\u003c\/p\u003e","brand":"Woodpeckers","offers":[{"title":"Default Title","offer_id":43570222268464,"sku":"MFTPOSDOG2-19","price":5.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4876\/8304\/files\/761jgt1tnl2u_55c028f7-4b9a-410f-9c95-611798960399.jpg?v=1788576818"},{"product_id":"woodpeckers-mftlasqr-19-mft-layout-assembly-square-95yvza","title":"Woodpeckers MFTLASQR-19 MFT Layout \u0026 Assembly Square","description":"\u003csection data-aplus\u003e\n\u003cdetails id=\"product-features\" class=\"acc\" open\u003e\n  \u003csummary\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\"\u003e\n    \u003cdiv class=\"features\"\u003e\n      \u003cdiv class=\"card\"\u003e\n        \u003cdiv class=\"card-inside\"\u003e\n          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/accuracy.svg\" alt=\"accuracy\" class=\"aplusicon\"\u003e\n        \u003c\/div\u003e\n        \u003cdiv\u003e\u003cstrong\u003eSquare Your Rail\u003c\/strong\u003e\u003c\/div\u003e\n        \u003cdiv class=\"feature-card\"\u003eThe Woodpeckers MFT Layout \u0026amp; Assembly Square is built to square a track saw guide rail quickly on an MFT-style work surface. That means less setup time and fewer headaches when you need repeatable, straight cuts.\u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"card\"\u003e\n        \u003cdiv class=\"card-inside\"\u003e\n          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/capacity.svg\" alt=\"capacity\" class=\"aplusicon\"\u003e\n        \u003c\/div\u003e\n        \u003cdiv\u003e\u003cstrong\u003eLong Reference Edge\u003c\/strong\u003e\u003c\/div\u003e\n        \u003cdiv class=\"feature-card\"\u003eIt spans the full width of a table saw blade for setting a miter gauge with a longer reference than a small square gives you. That extra contact makes fine adjustments easier to trust.\u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"card\"\u003e\n        \u003cdiv class=\"card-inside\"\u003e\n          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/handle.svg\" alt=\"handle\" class=\"aplusicon\"\u003e\n        \u003c\/div\u003e\n        \u003cdiv\u003e\u003cstrong\u003eEasy to Clamp\u003c\/strong\u003e\u003c\/div\u003e\n        \u003cdiv class=\"feature-card\"\u003eThe cutout slots do more than cut weight. They work as handholds and clamping points, so you can hold parts perpendicular during cabinet and case assembly without fighting the square.\u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails id=\"product-overview\" class=\"acc\"\u003e\n  \u003csummary\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\" data-product-summary\u003e\n    \u003cp\u003eThe \u003cstrong\u003eWoodpeckers MFT Layout \u0026amp; Assembly Square\u003c\/strong\u003e is a large precision woodworking square for MFT worktops, guide rail setup, and cabinet assembly. This is a layout and assembly square designed for squaring track saw guide rails, setting a table saw miter gauge, and checking case assemblies. Model number: \u003cstrong\u003eMFTLASQR-19\u003c\/strong\u003e. If you build cabinets, break down sheet goods, or rely on an MFT-style bench for repeatable cuts, this is the kind of setup tool that saves time before the saw ever starts.\u003c\/p\u003e\n    \u003cp\u003eWhat makes this square matter is how many jobs it covers in the shop. In the product images, it is shown squaring a Festool guide rail on an MFT table, spanning a table saw blade to help set a miter gauge, and checking cabinet assemblies for square. That kind of versatility is the real value here. You are not buying a one-trick jig. You are buying a large reference tool that helps keep multiple stations in your shop honest.\u003c\/p\u003e\n    \u003cp\u003eThe triangular layout gives you broad contact on a work surface and plenty of stability when you are referencing an edge or a rail. Compared with a small machinist square or compact speed square, a large-format square like this is easier to register against bigger parts, sheet goods, and assembled boxes. That is especially useful when you need to confirm a case is staying square during glue-up or while clamping panels together.\u003c\/p\u003e\n    \u003cp\u003eWoodpeckers also gave it practical openings instead of leaving it as a solid plate. Those slots create useful handholds when you are moving the square around the bench, and they double as clamping access points. In the images, clamps pass through the openings so the square can help hold workpieces perpendicular. That is a smart detail because it turns the square from a measuring reference into a real assembly aid.\u003c\/p\u003e\n    \u003cp\u003eFor track saw users, the big benefit is setup confidence. The product imagery calls out its use for your track saw, and the square is shown registering against the perforated top and the guide rail for a quick, repeatable squaring routine. If you break down plywood, cut cabinet parts, or want cleaner first-pass accuracy from your guide rail system, this kind of reference tool helps remove guesswork from the setup stage.\u003c\/p\u003e\n    \u003cp\u003eIt also earns its keep at the table saw. One image specifically notes that the square spans the full width of the saw blade to give you a long reference when setting a miter gauge. That longer contact point makes it easier to dial in alignment than trying to read tiny changes off a short rule or small square. For woodworkers who tune their own machines, that is a real shop advantage.\u003c\/p\u003e\n    \u003cp\u003eThe Woodpeckers MFT Layout \u0026amp; Assembly Square is best suited for cabinetmakers, furniture builders, serious hobby woodworkers, and anyone using an MFT-style bench with a track saw. It is also a strong fit for small professional shops where repeatable setup matters just as much as the cut itself. If your work involves sheet goods, casework, or assembly tasks where square actually has to mean square, this tool makes a lot of sense.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails id=\"product-benefits-1\" class=\"acc\"\u003e\n  \u003csummary\u003e\u003ch2\u003eGet Your Track Saw Rail Square Fast\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\"\u003e\n    \u003cdiv class=\"row\"\u003e\n      \u003cdiv class=\"img\"\u003e\n        \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/50181120295206_56e14eadb49b.jpg\" alt=\"Woodpeckers MFT Layout \u0026amp; Assembly Square aligning a track saw guide rail on an MFT worktable for accurate sheet goods cutting in a woodworking shop\" class=\"tnblock-img\"\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"copy\"\u003e\n        \u003cp\u003eIf you use a guide rail system for plywood and cabinet parts, this is the setup step that helps everything downstream go smoother. The square is made to register the rail cleanly on an MFT-style top so you can start cutting with confidence.\u003c\/p\u003e\n        \u003cul\u003e\n          \u003cli\u003eBuilt around MFT layout and guide rail squaring tasks\u003c\/li\u003e\n          \u003cli\u003eLarge triangular shape gives stable contact on the work surface\u003c\/li\u003e\n          \u003cli\u003eHelps reduce setup drift before repetitive cuts\u003c\/li\u003e\n        \u003c\/ul\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails id=\"product-benefits-2\" class=\"acc flip\"\u003e\n  \u003csummary\u003e\u003ch2\u003eSet Up Your Table Saw More Precisely\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\"\u003e\n    \u003cdiv class=\"row\"\u003e\n      \u003cdiv class=\"img\"\u003e\n        \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/50181120295206_954893c220d3.jpg\" alt=\"Woodpeckers MFT Layout \u0026amp; Assembly Square spanning a table saw blade while setting a miter gauge for accurate crosscut alignment\" class=\"tnblock-img\"\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"copy\"\u003e\n        \u003cp\u003eA small square can get you close, but a longer reference makes fine tuning easier. Here the square reaches across the full width of the blade, giving you more useful contact when setting a table saw miter gauge.\u003c\/p\u003e\n        \u003cul\u003e\n          \u003cli\u003eLong reference surface helps with miter gauge setup\u003c\/li\u003e\n          \u003cli\u003eUseful for table saw tuning and crosscut accuracy checks\u003c\/li\u003e\n          \u003cli\u003eOne tool can support both track saw and table saw workflows\u003c\/li\u003e\n        \u003c\/ul\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails id=\"product-benefits-3\" class=\"acc\"\u003e\n  \u003csummary\u003e\u003ch2\u003eUseful for Repetitive Parallel Cuts\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\"\u003e\n    \u003cdiv class=\"row\"\u003e\n      \u003cdiv class=\"img\"\u003e\n        \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/50181120295206_a6622f14f0b5.jpg\" alt=\"Woodpeckers MFT Layout \u0026amp; Assembly Square with locking pins installed on an MFT table for quick repetitive parallel cutting with a guide rail\" class=\"tnblock-img\"\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"copy\"\u003e\n        \u003cp\u003eOnce the square is located with locking pins, it becomes a repeatable reference instead of just a one-time setup aid. That is a big help when you are batching out parts and want parallel cuts without remeasuring every piece.\u003c\/p\u003e\n        \u003cul\u003e\n          \u003cli\u003eShown in use with locking pins for repeatability\u003c\/li\u003e\n          \u003cli\u003eWell suited for production-style cutting on MFT worktops\u003c\/li\u003e\n          \u003cli\u003eReduces repeated layout work on similar parts\u003c\/li\u003e\n        \u003c\/ul\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails id=\"product-benefits-4\" class=\"acc flip\"\u003e\n  \u003csummary\u003e\u003ch2\u003ePull Double Duty in Assembly\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\"\u003e\n    \u003cdiv class=\"row\"\u003e\n      \u003cdiv class=\"img\"\u003e\n        \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/50181120295206_4443d55ef38e.jpg\" alt=\"Woodpeckers MFT Layout \u0026amp; Assembly Square clamped against wood panels to hold workpieces perpendicular during cabinet assembly on a woodworking bench\" class=\"tnblock-img\"\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"copy\"\u003e\n        \u003cp\u003eThis is not just for machine setup. The size and slot layout let you use it as a practical assembly square when holding parts at 90 degrees during cabinet and casework glue-up.\u003c\/p\u003e\n        \u003cul\u003e\n          \u003cli\u003eSlots act as handholds and clamping access points\u003c\/li\u003e\n          \u003cli\u003eHelpful for holding workpieces perpendicular\u003c\/li\u003e\n          \u003cli\u003eGood fit for case assemblies and cabinet boxes\u003c\/li\u003e\n        \u003c\/ul\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails id=\"product-key-specifications\" class=\"acc\" open\u003e\n  \u003csummary\u003e\u003ch2\u003eKey Specifications\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\"\u003e\n    \u003ctable class=\"aplusspecs\"\u003e\n      \u003ctr\u003e\n        \u003cth\u003eBrand\u003c\/th\u003e\n        \u003ctd\u003eWoodpeckers\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003cth\u003eProduct Type\u003c\/th\u003e\n        \u003ctd\u003eLayout and assembly square\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003cth\u003eForm Factor\u003c\/th\u003e\n        \u003ctd\u003eLarge triangular square\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003cth\u003ePrimary Use\u003c\/th\u003e\n        \u003ctd\u003eSquaring track saw guide rails on MFT-style worktops\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003cth\u003eSecondary Use\u003c\/th\u003e\n        \u003ctd\u003eSetting table saw miter gauges\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003cth\u003eAssembly Use\u003c\/th\u003e\n        \u003ctd\u003eChecking case assemblies and holding parts perpendicular\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003cth\u003eCutout Slots\u003c\/th\u003e\n        \u003ctd\u003eYes, dual slots for handling and clamping access\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003cth\u003eLocking Pin Use\u003c\/th\u003e\n        \u003ctd\u003eSupports quick repetitive parallel cutting when pins are installed\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails id=\"product-built-for\" class=\"acc\"\u003e\n  \u003csummary\u003e\u003ch2\u003eBuilt For\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\"\u003e\n    \u003cdiv class=\"tags\"\u003e\n      \u003cspan class=\"tag\"\u003eWoodworking\u003c\/span\u003e\n      \u003cspan class=\"tag\"\u003eCabinetry\u003c\/span\u003e\n      \u003cspan class=\"tag\"\u003eCase Assembly\u003c\/span\u003e\n      \u003cspan class=\"tag\"\u003eTrack Saw Setup\u003c\/span\u003e\n      \u003cspan class=\"tag\"\u003eTable Saw Tuning\u003c\/span\u003e\n      \u003cspan class=\"tag\"\u003eSheet Goods Cutting\u003c\/span\u003e\n      \u003cspan class=\"tag\"\u003eFurniture Making\u003c\/span\u003e\n      \u003cspan class=\"tag\"\u003eDIY \/ Hobbyist\u003c\/span\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails id=\"product-pro-tips\" class=\"acc\"\u003e\n  \u003csummary\u003e\u003ch2\u003ePro Tip\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\"\u003e\n    \u003cdiv class=\"tip-row\"\u003e\n      \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/specs.svg\" alt=\"specs\" class=\"icon-lg\"\u003e\n      \u003cp class=\"tip-text\"\u003eIf you are cutting multiple parts to the same width on an MFT-style bench, set the square with locking pins first, then leave it in place for the whole run. That turns your layout tool into a repeatable reference and cuts down on measuring between pieces.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails id=\"product-tool-nut-take\" class=\"acc\"\u003e\n  \u003csummary\u003e\u003ch2\u003eTool Nut's Take\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\"\u003e\n    \u003cdiv class=\"eyebrow\"\u003eTool Nut's Take\u003c\/div\u003e\n    \u003ch3\u003eWhy the Woodpeckers MFT Layout \u0026amp; Assembly Square earns bench space\u003c\/h3\u003e\n    \u003cp\u003eThis is the kind of shop accessory that looks simple until you start using it in three different stations and wonder why you waited so long.\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eWho it's for:\u003c\/strong\u003e Woodworkers, cabinet builders, and serious hobbyists using an MFT-style bench, track saw, or a tuned table saw setup.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eWhy it stands out:\u003c\/strong\u003e It is not just a big square. It helps square a guide rail, gives a long reference for miter gauge setup, and works as an assembly aid when you need parts held at 90 degrees.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eWorth knowing:\u003c\/strong\u003e This is a precision shop setup and assembly tool, not a general framing square. Its value shows up most when accuracy and repeatability matter.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails id=\"product-faqs\" class=\"acc\"\u003e\n  \u003csummary\u003e\u003ch2\u003eCommon Questions\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\"\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eWhat is this tool mainly used for?\u003c\/strong\u003e It is mainly used to square a track saw guide rail on an MFT-style work surface and to support accurate layout and assembly work.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eCan it help with table saw setup?\u003c\/strong\u003e Yes. Product imagery shows it spanning the full width of the saw blade to provide a long reference for setting a table saw miter gauge.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eIs it useful for cabinet and casework assembly?\u003c\/strong\u003e Yes. The size and heft are shown being used to check case assemblies, and the slots allow clamping access when holding workpieces perpendicular.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eCan it support repetitive parallel cuts?\u003c\/strong\u003e Yes. With locking pins installed, the product imagery shows it being used for quick repetitive parallel cutting on an MFT-style setup.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\u003c\/section\u003e","brand":"Woodpeckers","offers":[{"title":"Default Title","offer_id":43570222432304,"sku":"MFTLASQR-19","price":32.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4876\/8304\/files\/8loe6raw5s7a_a9edfa08-f43a-43d4-a3c2-c16eeb481596.jpg?v=1788576819"},{"product_id":"woodpeckers-hbj-19-custom-mft-hole-boring-jig-4m186l","title":"Woodpeckers HBJ-19 Custom MFT Hole Boring Jig","description":"\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/c0vND7FrQ_8?si=Mj4JAbJSS4rBEYUd\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen\u003e\u003c\/iframe\u003e\u003ch1 dir=\"ltr\"\u003e\u003cspan\u003eWoodpeckers Hole Boring Jig\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWoodpeckers Hole Boring Jig is a 3\/8\" thick solid phenolic, CNC-machined template. Index pins placed against the corner of your table position the template for the first group of holes. Then, you’ll use the already-milled holes to index across the rest of the table surface. All you need is a router that accepts Porter-Cable style guide bushings and a 1\/2\" straight router bit (up-cut spiral bits are best). \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTwo standards have developed for these table tops. Festool and several other European-based companies use 20mm holes. Veritas and several others use 3\/4\" holes. Woodpeckers has you covered no matter which standard you use. You can get the Hole Boring Jig with the right guide bushings and index pins to cut either 20mm or 3\/4\" holes. Or, if you’re like most American woodworkers and have “some of this and some of that,” get the complete kit which has the guide bushings and index pins for both sizes. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFor less than the price of one replacement top for a Festool MFT, you can get the jig, make your own replacement top and then start adding gridwork tops for the other work surfaces in your shop. With an array of clamps and end-stops there’s no limit to the workholding arrangements you can set up on a gridwork table. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan id=\"docs-internal-guid-911b726c-7fff-23ca-7392-2d2abe9c195a\"\u003e\u003cspan\u003eThis former \u003c\/span\u003e\u003cspan\u003eOneTIME Tool® \u003c\/span\u003e\u003cspan\u003enow joins our permanent product line-up, along with a large and growing family of products designed to help you get the most out of your Festool power tools and tables. All Woodpeckers products are precisely machined and carefully inspected in our Strongsville, Ohio factory, just south of Cleveland. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eWoodworkers around the world have embraced the idea of a work surface milled with a gridwork of holes. Dozens of companies (large and small) produce devices that fit into the grid to hold your work. The milled work surface itself is available from several companies, often as part of a workbench or work table. Now, with Woodpeckers Hole Boring Jig, you can make your own gridwork top, right in your shop, for a fraction of the cost of a ready-made top. Whether youre building a custom work table or replacing the top on something like a Festool MFT, you can mill the top with near-CNC accuracy with nothing fancier than a good router and a sharp bit.\u003c\/p\u003e","brand":"Woodpeckers","offers":[{"title":"Default Title","offer_id":43570222596144,"sku":"HBJ-19","price":56.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4876\/8304\/files\/w4t2mr730zgr_f42722df-7218-408f-9d2f-5643527e578d.jpg?v=1788576824"}],"url":"https:\/\/toolnutus.com\/collections\/build-your-own-custom-mft-table.oembed","provider":"InoPrints","version":"1.0","type":"link"}