{"title":"Adhesive Applicator","description":null,"products":[{"product_id":"simpson-strong-tie-eipx-ezkt-e-z-click-corner-mount-drilled-in-injection-port-kit-20-pack-3lujlq","title":"Simpson Strong-Tie EIPX-EZKT E-Z-Click Corner-Mount\/Drilled-In Injection Port Kit, 20-Pack","description":"\u003cul\u003e\n\u003cli\u003ePositive connection eliminates messy leakage, minimizing waste and clean-up\u003c\/li\u003e\n\u003cli\u003eNo drilling of ports: E-Z-Click ports perform while pasted to the surface of the concrete; no drilling required for most applications\u003c\/li\u003e\n\u003cli\u003eDisconnect the fitting from the E-Z-Click port and the epoxy stops flowing, no leaky mess\u003c\/li\u003e\n\u003cli\u003eAfter injecting, pull the head of the E-Z-Click port out to close it and prevent leakage\u003c\/li\u003e\n\u003cli\u003eOne person can work faster without having to hold the tube on the port\u003c\/li\u003e\n\u003cli\u003eEIPX intended for use as a surface-mount port in corners and a drilled-in port on flat surfaces\u003c\/li\u003e\n\u003cli\u003eEach bag contains (20) E-Z-Click corner-mount\/drilled-in injection ports and (1) E-Z-Click injection fitting\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Simpson Strong-Tie E-Z-Click™ injection system is composed of a specially designed fitting and ports that take the mess out of your repair project while allowing you to work faster. The E-Z-Click injection fitting installs onto the end of the Optimix mixing nozzle and clicks onto the E-Z-Click ports during injection. The positive connection eliminates messy leakage, minimizing waste and clean-up.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePositive connection eliminates messy leakage, minimizing waste and clean-up\u003c\/li\u003e\n\u003cli\u003eNo drilling of ports: E-Z-Click ports perform while pasted to the surface of the concrete; no drilling required for most applications\u003c\/li\u003e\n\u003cli\u003eDisconnect the fitting from the E-Z-Click port and the epoxy stops flowing, no leaky mess\u003c\/li\u003e\n\u003cli\u003eAfter injecting, pull the head of the E-Z-Click port out to close it and prevent leakage\u003c\/li\u003e\n\u003cli\u003eOne person can work faster without having to hold the tube on the port\u003c\/li\u003e\n\u003cli\u003eEIPX intended for use as a surface-mount port in corners and a drilled-in port on flat surfaces\u003c\/li\u003e\n\u003cli\u003eEach bag contains (20) E-Z-Click corner-mount\/drilled-in injection ports and (1) E-Z-Click injection fitting\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":43569813880880,"sku":"EIPX-EZKT","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4876\/8304\/files\/3xthipgjlzw4_a6978265-3516-4265-976c-538ef3228dc1.jpg?v=1788568673"},{"product_id":"simpson-strong-tie-eif-ez-e-z-click-injection-port-fitting-7vqp9m","title":"Simpson Strong-Tie EIF-EZ E-Z-Click Injection Port Fitting","description":"\u003cul\u003e\n\u003cli\u003ePositive connection eliminates messy leakage, minimizing waste and clean-up\u003c\/li\u003e\n\u003cli\u003eNo drilling of ports: E-Z-Click ports perform while pasted to the surface of the concrete; no drilling required for most applications\u003c\/li\u003e\n\u003cli\u003eDisconnect the fitting from the E-Z-Click port and the epoxy stops flowing, no leaky mess\u003c\/li\u003e\n\u003cli\u003eAfter injecting, pull the head of the E-Z-Click port out to close it and prevent leakage\u003c\/li\u003e\n\u003cli\u003eOne person can work faster without having to hold the tube on the port\u003c\/li\u003e\n\u003cli\u003eQuantity: (1) E-Z-Click injection fitting per bag\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Simpson Strong-Tie E-Z-Click™ injection system is composed of a specially designed fitting and ports that take the mess out of your repair project while allowing you to work faster. The E-Z-Click injection fitting installs onto the end of the Optimix mixing nozzle and clicks onto the E-Z-Click ports during injection. The positive connection eliminates messy leakage, minimizing waste and clean-up.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePositive connection eliminates messy leakage, minimizing waste and clean-up\u003c\/li\u003e\n\u003cli\u003eNo drilling of ports: E-Z-Click ports perform while pasted to the surface of the concrete; no drilling required for most applications\u003c\/li\u003e\n\u003cli\u003eDisconnect the fitting from the E-Z-Click port and the epoxy stops flowing, no leaky mess\u003c\/li\u003e\n\u003cli\u003eAfter injecting, pull the head of the E-Z-Click port out to close it and prevent leakage\u003c\/li\u003e\n\u003cli\u003eOne person can work faster without having to hold the tube on the port\u003c\/li\u003e\n\u003cli\u003eQuantity: (1) E-Z-Click injection fitting per bag\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":43569814175792,"sku":"EIF-EZ","price":5.52,"currency_code":"USD","in_stock":true}]},{"product_id":"simpson-strong-tie-eipx-ez-rp20-e-z-click-corner-mount-drilled-in-injection-ports-20-pack-at3dz6","title":"Simpson Strong-Tie EIPX-EZ-RP20 E-Z-Click Corner-Mount\/Drilled-In Injection Ports, 20-Pack","description":"\u003cul\u003e\n\u003cli\u003ePositive connection eliminates messy leakage, minimizing waste and clean-up\u003c\/li\u003e\n\u003cli\u003eNo drilling of ports: E-Z-Click ports perform while pasted to the surface of the concrete; no drilling required for most applications\u003c\/li\u003e\n\u003cli\u003eDisconnect the fitting from the E-Z-Click port and the epoxy stops flowing, no leaky mess\u003c\/li\u003e\n\u003cli\u003eAfter injecting, pull the head of the E-Z-Click port out to close it and prevent leakage\u003c\/li\u003e\n\u003cli\u003eOne person can work faster without having to hold the tube on the port\u003c\/li\u003e\n\u003cli\u003eEIPX intended for use as a surface-mount port in corners and a drilled-in port on flat surfaces\u003c\/li\u003e\n\u003cli\u003eEach bag contains (20) E-Z-Click corner-mount\/drilled-in injection ports\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Simpson Strong-Tie E-Z-Click™ injection system is composed of a specially designed fitting and ports that take the mess out of your repair project while allowing you to work faster. The E-Z-Click injection fitting installs onto the end of the Optimix mixing nozzle and clicks onto the E-Z-Click ports during injection. The positive connection eliminates messy leakage, minimizing waste and clean-up.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePositive connection eliminates messy leakage, minimizing waste and clean-up\u003c\/li\u003e\n\u003cli\u003eNo drilling of ports: E-Z-Click ports perform while pasted to the surface of the concrete; no drilling required for most applications\u003c\/li\u003e\n\u003cli\u003eDisconnect the fitting from the E-Z-Click port and the epoxy stops flowing, no leaky mess\u003c\/li\u003e\n\u003cli\u003eAfter injecting, pull the head of the E-Z-Click port out to close it and prevent leakage\u003c\/li\u003e\n\u003cli\u003eOne person can work faster without having to hold the tube on the port\u003c\/li\u003e\n\u003cli\u003eEIPX intended for use as a surface-mount port in corners and a drilled-in port on flat surfaces\u003c\/li\u003e\n\u003cli\u003eEach bag contains (20) E-Z-Click corner-mount\/drilled-in injection ports\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":43569814405168,"sku":"EIPX-EZ-RP20","price":12.0,"currency_code":"USD","in_stock":true}]},{"product_id":"simpson-strong-tie-edta22p-edta22p-pneumatic-dispensing-tool-for-22-oz-epoxy-adhesive-cartridges-dy67t2","title":"Simpson Strong-Tie EDTA22P EDTA22P Pneumatic Dispensing Tool for 22-oz. Epoxy Adhesive Cartridges","description":"\u003cul\u003e\n\u003cli\u003eProvides a 26:1 drive mechanism for easier dispensing of high-viscosity adhesive\u003c\/li\u003e\n\u003cli\u003eSuitcase handle option provides dispensing convenience for ground-level doweling\u003c\/li\u003e\n\u003cli\u003eAir supply attachment is 1\/4-18 NPT (male) thread\u003c\/li\u003e\n\u003cli\u003eRecommended operating air pressure is 80-100 psi\u003c\/li\u003e\n\u003cli\u003eFor 22 oz. epoxy adhesive cartridges\u003c\/li\u003e\n\u003cli\u003eHeavy-duty design provides durability for long-term use\u003c\/li\u003e\n\u003cli\u003eIncludes custom, blow-molded plastic carrying case\u003c\/li\u003e\n\u003cli\u003eDesigned to perform under continuous, repetitive dispensing demands\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSimpson Strong-Tie adhesive dispensing tools are designed to provide accurate, controlled application of adhesives in a variety of settings. The EDTA22P provides pneumatic dispensing for 22 oz. epoxy adhesive cartridges. The tool features an optional suitcase handle adapter for dispensing convenience, enabling easier and time-saving ground-level doweling. This heavy-duty tool comes with a custom, blow-molded plastic carrying case\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides a 26:1 drive mechanism for easier dispensing of high-viscosity adhesive\u003c\/li\u003e\n\u003cli\u003eSuitcase handle option provides dispensing convenience for ground-level doweling\u003c\/li\u003e\n\u003cli\u003eAir supply attachment is 1\/4-18 NPT (male) thread\u003c\/li\u003e\n\u003cli\u003eRecommended operating air pressure is 80-100 psi\u003c\/li\u003e\n\u003cli\u003eFor 22 oz. epoxy adhesive cartridges\u003c\/li\u003e\n\u003cli\u003eHeavy-duty design provides durability for long-term use\u003c\/li\u003e\n\u003cli\u003eIncludes custom, blow-molded plastic carrying case\u003c\/li\u003e\n\u003cli\u003eDesigned to perform under continuous, repetitive dispensing demands\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":43569814569008,"sku":"EDTA22P","price":245.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4876\/8304\/files\/ytfr44lzvpnv_299ab95c-1366-494f-8c64-8ae1700d4d11.jpg?v=1788568713"},{"product_id":"simpson-strong-tie-edta56p-edta56p-pneumatic-dispensing-tool-for-56-oz-cartridges-oh078w","title":"Simpson Strong-Tie EDTA56P EDTA56P Pneumatic Dispensing Tool for 56 oz. Cartridges","description":"\u003cul\u003e\n\u003cli\u003eProvides a 26:1 drive mechanism for easier dispensing of high-viscosity adhesive\u003c\/li\u003e\n\u003cli\u003eSuitcase handle option provides dispensing convenience for ground-level doweling\u003c\/li\u003e\n\u003cli\u003eAir supply attachment is 1\/4-18 NPT (male) thread\u003c\/li\u003e\n\u003cli\u003eRecommended operating air pressure is 80–100 psi\u003c\/li\u003e\n\u003cli\u003eFor 56 oz. epoxy adhesive cartridges\u003c\/li\u003e\n\u003cli\u003eHeavy-duty design provides durability for long-term use\u003c\/li\u003e\n\u003cli\u003eIncludes custom, blow-molded plastic carrying case\u003c\/li\u003e\n\u003cli\u003eDesigned to perform under continuous, repetitive dispensing demands\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSimpson Strong-Tie adhesive dispensing tools are designed to provide accurate, controlled application of adhesives in a variety of settings. The EDTA56P provides pneumatic dispensing of 56 oz. epoxy adhesive cartridges. The tool features an optional suitcase handle adapter for dispensing convenience, enabling easier and time-saving ground-level doweling. This heavy-duty tool comes with a custom, blow-molded plastic carrying case.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides a 26:1 drive mechanism for easier dispensing of high-viscosity adhesive\u003c\/li\u003e\n\u003cli\u003eSuitcase handle option provides dispensing convenience for ground-level doweling\u003c\/li\u003e\n\u003cli\u003eAir supply attachment is 1\/4-18 NPT (male) thread\u003c\/li\u003e\n\u003cli\u003eRecommended operating air pressure is 80–100 psi\u003c\/li\u003e\n\u003cli\u003eFor 56 oz. epoxy adhesive cartridges\u003c\/li\u003e\n\u003cli\u003eHeavy-duty design provides durability for long-term use\u003c\/li\u003e\n\u003cli\u003eIncludes custom, blow-molded plastic carrying case\u003c\/li\u003e\n\u003cli\u003eDesigned to perform under continuous, repetitive dispensing demands\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":43569814601776,"sku":"EDTA56P","price":255.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4876\/8304\/files\/mtm8she45anf_ba0da260-6910-4963-af7e-d12c299b1c7f.jpg?v=1788568714"},{"product_id":"simpson-strong-tie-cdt10s-cdt10s-manual-dispensing-tool-for-10-oz-single-cartridge-adhesives-r4b8zw","title":"Simpson Strong-Tie CDT10S CDT10S Manual Dispensing Tool for 10 oz. Single-Cartridge Adhesives","description":"\u003cul\u003e\n\u003cli\u003eManual dispensing tool\u003c\/li\u003e\n\u003cli\u003eProvides a 26:1 drive mechanism for easier dispensing of high-viscosity adhesive\u003c\/li\u003e\n\u003cli\u003eHeavy-duty steel carriage provides durability for long-term use\u003c\/li\u003e\n\u003cli\u003eDesigned to perform under continuous, repetitive dispensing demands\u003c\/li\u003e\n\u003cli\u003eDouble-gripping plates help extend tool life\u003c\/li\u003e\n\u003cli\u003eSmooth, controlled dispensing ensures even adhesive flow\u003c\/li\u003e\n\u003cli\u003eLow-maintenance design minimizes clogging and performance interruptions\u003c\/li\u003e\n\u003cli\u003eFor use with Simpson Strong-Tie SET3G10, ET3G10, AT3G10 or any 10 oz. single-cartridge adhesive\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSimpson Strong-Tie adhesive dispensing tools are designed to provide accurate, controlled application of adhesives in a variety of settings. The CDT10S is specifically built for trouble-free manual dispensing of 10 oz. single-cartridge epoxy and acrylic adhesives. It features a steel carriage for ultimate durability and is engineered for continuous, high-volume use. The CDT10S also features double-gripping plates that help extend tool life.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eManual dispensing tool\u003c\/li\u003e\n\u003cli\u003eProvides a 26:1 drive mechanism for easier dispensing of high-viscosity adhesive\u003c\/li\u003e\n\u003cli\u003eHeavy-duty steel carriage provides durability for long-term use\u003c\/li\u003e\n\u003cli\u003eDesigned to perform under continuous, repetitive dispensing demands\u003c\/li\u003e\n\u003cli\u003eDouble-gripping plates help extend tool life\u003c\/li\u003e\n\u003cli\u003eSmooth, controlled dispensing ensures even adhesive flow\u003c\/li\u003e\n\u003cli\u003eLow-maintenance design minimizes clogging and performance interruptions\u003c\/li\u003e\n\u003cli\u003eFor use with Simpson Strong-Tie SET3G10, ET3G10, AT3G10 or any 10 oz. single-cartridge adhesive\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":43569839833136,"sku":"CDT10S","price":12.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4876\/8304\/files\/5dw8pdo8ymsj_88e56eb1-a3a8-4fa8-a478-c6e1c1b76150.jpg?v=1788569445"},{"product_id":"simpson-strong-tie-adt813s-adt813s-steel-adhesive-dispensing-tool-for-12-5-oz-cartridge-mu6tt6","title":"Simpson Strong-Tie ADT813S ADT813S Steel Adhesive Dispensing Tool for 12.5 oz. Cartridge","description":"\u003cul\u003e\n\u003cli\u003eManual dispensing tool\u003c\/li\u003e\n\u003cli\u003eProvides a 26:1 drive mechanism for easier dispensing of high-viscosity adhesive\u003c\/li\u003e\n\u003cli\u003eHeavy-duty steel carriage provides durability for long-term use\u003c\/li\u003e\n\u003cli\u003eDesigned to perform under continuous, repetitive dispensing demands\u003c\/li\u003e\n\u003cli\u003eDouble-gripping plates help extend tool life\u003c\/li\u003e\n\u003cli\u003eSmooth, controlled dispensing ensures even adhesive flow\u003c\/li\u003e\n\u003cli\u003eLow-maintenance design minimizes clogging and performance interruptions\u003c\/li\u003e\n\u003cli\u003eFor use with Simpson Strong-Tie AT-XP13 or any 12.5 oz. single-cartridge acrylic adhesive\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSimpson Strong-Tie adhesive dispensing tools are designed to provide accurate, controlled application of adhesives in a variety of settings. The ADT813S is specifically built for manual, trouble-free dispensing of 12.5 oz. single-cartridge acrylic adhesives. It features a steel carriage for ultimate durability and is engineered for continuous, high-volume use. The ADT813S also features double-gripping plates that increase grip strength and reduce wear over time.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eManual dispensing tool\u003c\/li\u003e\n\u003cli\u003eProvides a 26:1 drive mechanism for easier dispensing of high-viscosity adhesive\u003c\/li\u003e\n\u003cli\u003eHeavy-duty steel carriage provides durability for long-term use\u003c\/li\u003e\n\u003cli\u003eDesigned to perform under continuous, repetitive dispensing demands\u003c\/li\u003e\n\u003cli\u003eDouble-gripping plates help extend tool life\u003c\/li\u003e\n\u003cli\u003eSmooth, controlled dispensing ensures even adhesive flow\u003c\/li\u003e\n\u003cli\u003eLow-maintenance design minimizes clogging and performance interruptions\u003c\/li\u003e\n\u003cli\u003eFor use with Simpson Strong-Tie AT-XP13 or any 12.5 oz. single-cartridge acrylic adhesive\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":43569860542512,"sku":"ADT813S","price":29.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4876\/8304\/files\/l4jwbwaci3uz_ddddb43f-b450-423d-83c2-04ecff6a9e2c.jpg?v=1788570055"},{"product_id":"simpson-strong-tie-et-3g-8-5-oz-epoxy-adhesive-cartridge-w-nozzle-and-extension-et3g10-nd5j7j","title":"Simpson Strong-Tie ET-3G 8.5-oz. Epoxy Adhesive Cartridge w\/ Nozzle and Extension (ET3G10)","description":"\u003csection data-aplus\u003e\n\u003cdetails id=\"product-features\" class=\"acc\" open\u003e\n  \u003csummary\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\"\u003e\n    \u003cdiv class=\"features\"\u003e\n      \u003cdiv class=\"card\"\u003e\n        \u003cdiv class=\"card-inside\"\u003e\n          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/material.svg\" alt=\"material\" class=\"aplusicon\"\u003e\n        \u003c\/div\u003e\n        \u003cdiv\u003e\u003cstrong\u003eConcrete and Masonry Anchoring\u003c\/strong\u003e\u003c\/div\u003e\n        \u003cdiv class=\"feature-card\"\u003eThis Simpson Strong-Tie ET3G10 epoxy anchoring adhesive is built for setting threaded rod and rebar in cracked and uncracked concrete and masonry. That gives you one adhesive for common anchoring and doweling work instead of juggling multiple products.\u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"card\"\u003e\n        \u003cdiv class=\"card-inside\"\u003e\n          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/temperature-range.svg\" alt=\"temperature-range\" class=\"aplusicon\"\u003e\n        \u003c\/div\u003e\n        \u003cdiv\u003e\u003cstrong\u003eWorks in Tough Conditions\u003c\/strong\u003e\u003c\/div\u003e\n        \u003cdiv class=\"feature-card\"\u003eIt can be installed in dry or water-saturated base materials with a substrate installation temperature range from 50 degrees Fahrenheit to 110 degrees Fahrenheit. That makes it practical for real jobsite conditions where concrete is not always perfectly dry.\u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"card\"\u003e\n        \u003cdiv class=\"card-inside\"\u003e\n          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/runtime.svg\" alt=\"runtime\" class=\"aplusicon\"\u003e\n        \u003c\/div\u003e\n        \u003cdiv\u003e\u003cstrong\u003eUseful Working Time\u003c\/strong\u003e\u003c\/div\u003e\n        \u003cdiv class=\"feature-card\"\u003eWith a 50-minute gel time at 70 degrees Fahrenheit, you get more time to place anchors accurately before the adhesive sets. That matters on layout-heavy installs, overhead work, and jobs where speed alone is not the priority.\u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails id=\"product-overview\" class=\"acc\"\u003e\n  \u003csummary\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\" data-product-summary\u003e\n    \u003cp\u003eThe Simpson Strong-Tie ET3G10 epoxy anchoring adhesive is an 8.5-ounce two-component epoxy cartridge for anchoring threaded rod and rebar into concrete and masonry. This is an anchoring adhesive designed for doweling and adhesive anchor installation in cracked and uncracked concrete and masonry. Model Number ET3G10. If you need a cartridge-size adhesive for structural anchoring work, this is the format aimed at smaller jobs, punch-list installs, and crews that want cartridge convenience instead of bulk dispensing equipment.\u003c\/p\u003e\n    \u003cp\u003eET-3G uses a 1:1 epoxy mix and is suitable for static and seismic loading conditions based on the manufacturer data. In practical terms, that means it is made for serious anchor installations, not light patch work or generic adhesive duty. It is intended for threaded rod anchoring and rebar doweling, and it is rated for horizontal, vertical, and overhead applications, which matters when the work is not limited to flat slab conditions.\u003c\/p\u003e\n    \u003cp\u003eOne of the most useful things about this adhesive is where it can be used. The base materials are concrete and masonry, both cracked and uncracked, and the listed base material conditions are dry and water-saturated. That gives the Simpson Strong-Tie ET3G10 epoxy anchoring adhesive a broader working envelope than products that need ideal, dry conditions to perform as intended. For field work, that flexibility can save a trip and keep the install moving.\u003c\/p\u003e\n    \u003cp\u003eWorking time is another big reason to choose this product. The published gel time is 50 minutes at 70 degrees Fahrenheit, with cure time listed at 24 hours at that same temperature. At 50 degrees Fahrenheit the gel time stretches to 100 minutes and full cure moves to 72 hours. At 110 degrees Fahrenheit the gel time drops to 18 minutes. That kind of schedule matters because it tells you whether this adhesive fits careful anchor placement, rebar doweling, or hotter weather installs where some products start getting away from you too fast.\u003c\/p\u003e\n    \u003cp\u003eThe cartridge format on ET3G10 is also straightforward. This specific version is the 8.5-ounce single cartridge, and the known package contents include one EMN22i mixing nozzle and one extension. That makes it a more ready-to-run option for single-anchor or lower-volume work, especially when compared with larger cartridge sizes and bulk kits that may require different dispensing gear or separate nozzle purchases.\u003c\/p\u003e\n    \u003cp\u003eOn the performance side, ET-3G is a non-sag epoxy with 3 grams per liter VOC and a teal mixed color to help verify proper mixing. Manufacturer data also lists a 13,000 psi compressive yield strength after 7-day cure, which helps explain why it is positioned for anchoring work rather than general-purpose bonding. The in-service temperature range of negative 40 degrees Fahrenheit to 150 degrees Fahrenheit adds confidence once the installation is complete and exposed to seasonal swings.\u003c\/p\u003e\n    \u003cp\u003eJobsite practicality is solid here too. Simpson notes easy hole cleaning with no power brushing required, and the product has a 24-month shelf life when unopened and stored between 45 degrees Fahrenheit and 90 degrees Fahrenheit. For contractors managing van stock or warehouse inventory, that longer shelf life is not a throwaway spec. It means less waste and fewer half-forgotten cartridges that age out before the next job.\u003c\/p\u003e\n    \u003cp\u003eWho should buy it? Concrete contractors, general contractors, structural retrofit crews, DOT work crews, and anyone handling adhesive anchoring or rebar doweling in concrete or CMU. Serious DIY users can use it too, but this is clearly a pro-grade anchoring adhesive meant for code-conscious installs and predictable performance. If your work calls for a small cartridge with included nozzle and extension, and you need compatibility with the Simpson Strong-Tie CDT10S dispensing tool, ET3G10 is the practical size to grab.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails id=\"product-benefits\" class=\"acc\"\u003e\n  \u003csummary\u003e\u003ch2\u003eBuilt for Real Anchor Installations\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\"\u003e\n    \u003cdiv class=\"row\"\u003e\n      \u003cdiv class=\"img\"\u003e\n        \u003cimg src=\"https:\/\/ssttoolbox.widen.net\/content\/ltwkt93szl\/jpeg\/A_ET-3G_InstPho_Pho_Inst_ET-3G-EpoxyAdhesive-BulkInstallation-Rebar-Concrete_C0.jpeg?position=c\u0026amp;color=ffffffff\u0026amp;u=cjmyin\" alt=\"Simpson Strong-Tie ET-3G epoxy anchoring adhesive being used for rebar installation in concrete on a roadway jobsite\" class=\"tnblock-img\"\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"copy\"\u003e\n        \u003cp\u003eThis product is made for anchoring work, not general glue duty. If you are setting rebar or threaded rod in concrete and need a product that fits horizontal, vertical, or overhead applications, this is the kind of adhesive you spec on purpose.\u003c\/p\u003e\n        \u003cul\u003e\n          \u003cli\u003eSuitable for static and seismic loading conditions\u003c\/li\u003e\n          \u003cli\u003eDesigned for threaded rod anchoring and rebar doweling into concrete and CMU\u003c\/li\u003e\n        \u003c\/ul\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails id=\"product-benefits-2\" class=\"acc flip\"\u003e\n  \u003csummary\u003e\u003ch2\u003eHandles Dry and Damp Base Materials\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\"\u003e\n    \u003cdiv class=\"row\"\u003e\n      \u003cdiv class=\"img\"\u003e\n        \u003cimg src=\"https:\/\/ssttoolbox.widen.net\/content\/ogtsgv0z3y\/jpeg\/A_OptiMesh_InstPho_Pho_Inst_Opti-MeshAdhesiveScreenTube-CMU_C0.jpeg?position=c\u0026amp;color=ffffffff\u0026amp;u=cjmyin\" alt=\"Simpson Strong-Tie ET-3G epoxy anchoring adhesive filling a masonry cell around rebar during CMU anchoring work\" class=\"tnblock-img\"\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"copy\"\u003e\n        \u003cp\u003eConcrete and masonry jobs are rarely perfectly dry. ET-3G is listed for dry and water-saturated base material conditions, which makes it easier to keep work moving when the substrate is less than ideal.\u003c\/p\u003e\n        \u003cul\u003e\n          \u003cli\u003eBase materials: cracked and uncracked concrete and masonry\u003c\/li\u003e\n          \u003cli\u003eBase material conditions: dry and water-saturated\u003c\/li\u003e\n        \u003c\/ul\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails id=\"product-benefits-3\" class=\"acc\"\u003e\n  \u003csummary\u003e\u003ch2\u003eCartridge Format That Is Ready to Run\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\"\u003e\n    \u003cdiv class=\"row\"\u003e\n      \u003cdiv class=\"img\"\u003e\n        \u003cimg src=\"https:\/\/ssttoolbox.widen.net\/content\/r3ik2yqkpc\/jpeg\/A_ET3G10_ProdPho_RI_Prod_ET-3G-EpoxyAdhesive-10oz_C0.jpeg?position=c\u0026amp;color=ffffffff\u0026amp;u=cjmyin\" alt=\"Simpson Strong-Tie ET3G10 epoxy anchoring adhesive 8.5 ounce cartridge for concrete and masonry anchoring on a clean background\" class=\"tnblock-img\"\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"copy\"\u003e\n        \u003cp\u003eThe ET3G10 size is the convenient option when you need cartridge control for smaller anchor runs or service work. You get the 8.5-ounce cartridge plus the included mixing nozzle and extension, so you are not chasing basic pieces before you start.\u003c\/p\u003e\n        \u003cul\u003e\n          \u003cli\u003e8.5 fl oz single cartridge format\u003c\/li\u003e\n          \u003cli\u003eIncludes one EMN22i mixing nozzle and one extension\u003c\/li\u003e\n        \u003c\/ul\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails id=\"product-whats-included\" class=\"acc\" open\u003e\n  \u003csummary\u003e\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\"\u003e\n    \u003cdiv class=\"tnincluded-wrapper\"\u003e\n      \u003cul\u003e\n        \u003cli\u003e(1) 8.5 fl oz ET3G10 epoxy anchoring adhesive cartridge\u003c\/li\u003e\n        \u003cli\u003e(1) EMN22i mixing nozzle\u003c\/li\u003e\n        \u003cli\u003e(1) Extension\u003c\/li\u003e\n      \u003c\/ul\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails id=\"product-key-specifications\" class=\"acc\" open\u003e\n  \u003csummary\u003e\u003ch2\u003eKey Specifications\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\"\u003e\n    \u003ctable class=\"aplusspecs\"\u003e\n      \u003ctr\u003e\n        \u003cth\u003eAdhesive Type\u003c\/th\u003e\n        \u003ctd\u003eTwo-component 1:1 epoxy\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003cth\u003eNet Contents\u003c\/th\u003e\n        \u003ctd\u003e8.5 fl oz\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003cth\u003eBase Materials\u003c\/th\u003e\n        \u003ctd\u003eConcrete and masonry, cracked and uncracked\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003cth\u003eBase Material Conditions\u003c\/th\u003e\n        \u003ctd\u003eDry and water-saturated\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003cth\u003eAnchor Type\u003c\/th\u003e\n        \u003ctd\u003eThreaded rod or rebar\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003cth\u003eSubstrate Installation Temperature\u003c\/th\u003e\n        \u003ctd\u003e50°F to 110°F\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003cth\u003eIn-Service Temperature Range\u003c\/th\u003e\n        \u003ctd\u003e-40°F to 150°F\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003cth\u003eVOC\u003c\/th\u003e\n        \u003ctd\u003e3 g\/L\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails id=\"product-compatibility\" class=\"acc\"\u003e\n  \u003csummary\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\"\u003e\n    \u003cdiv class=\"compat-list\"\u003e\n      \u003cdiv class=\"compat-row\"\u003e\n        \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/toolbox.svg\" alt=\"toolbox\" class=\"aplusicon\"\u003e\n        \u003cdiv\u003e\n          \u003cstrong\u003eDispensing Tool\u003c\/strong\u003e\n          \u003cdiv class=\"compat-detail\"\u003eET3G10 is compatible with the Simpson Strong-Tie CDT10S dispensing tool.\u003c\/div\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"compat-row\"\u003e\n        \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/accessories-included.svg\" alt=\"accessories-included\" class=\"aplusicon\"\u003e\n        \u003cdiv\u003e\n          \u003cstrong\u003eMixing Nozzle\u003c\/strong\u003e\n          \u003cdiv class=\"compat-detail\"\u003eUse only Simpson Strong-Tie mixing nozzles according to manufacturer instructions. This package includes one EMN22i mixing nozzle.\u003c\/div\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"compat-row\"\u003e\n        \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/material.svg\" alt=\"material\" class=\"aplusicon\"\u003e\n        \u003cdiv\u003e\n          \u003cstrong\u003eAnchor Materials\u003c\/strong\u003e\n          \u003cdiv class=\"compat-detail\"\u003eDesigned for adhesive anchoring with threaded rod and rebar in concrete and masonry applications.\u003c\/div\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails id=\"product-applications-uses\" class=\"acc\"\u003e\n  \u003csummary\u003e\u003ch2\u003eBuilt For\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\"\u003e\n    \u003cdiv class=\"tags\"\u003e\n      \u003cspan class=\"tag\"\u003eConcrete Construction\u003c\/span\u003e\n      \u003cspan class=\"tag\"\u003eMasonry\u003c\/span\u003e\n      \u003cspan class=\"tag\"\u003eGeneral Contracting\u003c\/span\u003e\n      \u003cspan class=\"tag\"\u003eStructural Retrofit\u003c\/span\u003e\n      \u003cspan class=\"tag\"\u003eRebar Doweling\u003c\/span\u003e\n      \u003cspan class=\"tag\"\u003eThreaded Rod Anchoring\u003c\/span\u003e\n      \u003cspan class=\"tag\"\u003eInterior \/ Exterior\u003c\/span\u003e\n      \u003cspan class=\"tag\"\u003eHorizontal, Vertical, Overhead Installs\u003c\/span\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails id=\"product-pro-tips\" class=\"acc\"\u003e\n  \u003csummary\u003e\u003ch2\u003ePro Tip\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\"\u003e\n    \u003cdiv class=\"tip-row\"\u003e\n      \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/specs.svg\" alt=\"specs\" class=\"aplusicon\"\u003e\n      \u003cp class=\"tip-text\"\u003ePay attention to base material temperature before you start. ET-3G gives you a long 50-minute gel time at 70°F, but once conditions climb, that window shrinks fast, so stage your rod or rebar and hole prep first instead of mixing and then scrambling.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails id=\"product-warranty\" class=\"acc\"\u003e\n  \u003csummary\u003e\u003ch2\u003eWarranty \u0026amp; Support\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\"\u003e\n    \u003cdiv class=\"warranty-row\"\u003e\n      \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/warranty.svg\" alt=\"warranty\" class=\"aplusicon\"\u003e\n      \u003cdiv class=\"warranty-text\"\u003e\n        Warranty information listed in supplementary product data: None.\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails id=\"product-tool-nut-take\" class=\"acc\"\u003e\n  \u003csummary\u003e\u003ch2\u003eTool Nut's Take\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\"\u003e\n    \u003cdiv class=\"eyebrow\"\u003eTool Nut's Take\u003c\/div\u003e\n    \u003ch3\u003eSmall Cartridge, Serious Anchoring Work\u003c\/h3\u003e\n    \u003cp\u003eThe Simpson Strong-Tie ET3G10 epoxy anchoring adhesive makes sense when you need code-minded anchor performance in a cartridge size that is easier to carry, load, and use on smaller runs.\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eWho it's for:\u003c\/strong\u003e Contractors and serious users installing threaded rod or rebar in concrete or masonry, especially when the job does not justify a larger bulk system.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eWhy it stands out:\u003c\/strong\u003e It covers cracked and uncracked concrete and masonry, works in dry or water-saturated conditions, and gives you a useful working time instead of rushing every placement.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eWorth knowing:\u003c\/strong\u003e This is adhesive-anchor material, not a general construction adhesive, and you need the right dispensing tool and proper Simpson Strong-Tie mixing nozzle setup to use it as intended.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails id=\"product-faqs\" class=\"acc\"\u003e\n  \u003csummary\u003e\u003ch2\u003eCommon Questions\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\"\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eWhat is ET3G10 used for?\u003c\/strong\u003e It is used for anchoring threaded rod and rebar into cracked and uncracked concrete and masonry.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eCan it be used in damp conditions?\u003c\/strong\u003e Yes. Manufacturer data lists dry and water-saturated base material conditions.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eHow long is the working time?\u003c\/strong\u003e At 70°F, the published gel time is 50 minutes. Working time changes with temperature.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eWhat dispensing tool does this cartridge use?\u003c\/strong\u003e The ET3G10 cartridge is listed as compatible with the Simpson Strong-Tie CDT10S dispensing tool.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\u003c\/section\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":43569886036016,"sku":"ET3G10","price":5.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4876\/8304\/files\/jhcv0c1thkly_1a7efd8a-ffdf-4412-9781-0b13948e83b7.jpg?v=1788570627"},{"product_id":"simpson-strong-tie-et-3g-22-oz-epoxy-adhesive-cartridge-w-nozzle-and-extension-et3g22-n-u8dnj0","title":"Simpson Strong-Tie ET-3G 22-oz. Epoxy Adhesive Cartridge w\/ Nozzle and Extension (ET3G22-N)","description":"\u003csection data-aplus\u003e\n\u003cdetails id=\"product-features\" class=\"acc\" open\u003e\n  \u003csummary\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\"\u003e\n    \u003cdiv class=\"features\"\u003e\n      \u003cdiv class=\"card\"\u003e\n        \u003cdiv class=\"card-inside\"\u003e\n          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/material.svg\" alt=\"material\" class=\"aplusicon\"\u003e\n        \u003c\/div\u003e\n        \u003cdiv\u003e\u003cstrong\u003eBuilt for Cracked Concrete\u003c\/strong\u003e\u003c\/div\u003e\n        \u003cdiv class=\"feature-card\"\u003eThis Simpson Strong-Tie ET3G22-N epoxy anchoring adhesive is rated for cracked and uncracked concrete and masonry under static and seismic loading. That matters when you need an adhesive anchor you can trust for real structural repair and anchoring work.\u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"card\"\u003e\n        \u003cdiv class=\"card-inside\"\u003e\n          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/temperature-range.svg\" alt=\"temperature-range\" class=\"aplusicon\"\u003e\n        \u003c\/div\u003e\n        \u003cdiv\u003e\u003cstrong\u003eLong Working Time\u003c\/strong\u003e\u003c\/div\u003e\n        \u003cdiv class=\"feature-card\"\u003eAt 70 degrees Fahrenheit, ET-3G gives about 50 minutes of gel time. That gives you more room to place threaded rod or rebar cleanly before the material starts to set.\u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"card\"\u003e\n        \u003cdiv class=\"card-inside\"\u003e\n          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/accessories-included.svg\" alt=\"accessories-included\" class=\"aplusicon\"\u003e\n        \u003c\/div\u003e\n        \u003cdiv\u003e\u003cstrong\u003eReady to Dispense\u003c\/strong\u003e\u003c\/div\u003e\n        \u003cdiv class=\"feature-card\"\u003eThe 22 ounce side-by-side cartridge includes one EMN22i mixing nozzle and one extension. You get the cartridge format most installers want for jobsite anchoring without having to piece together the basics.\u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails id=\"product-overview\" class=\"acc\"\u003e\n  \u003csummary\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\" data-product-summary\u003e\n    \u003cp\u003eThe \u003cstrong\u003eSimpson Strong-Tie ET3G22-N epoxy anchoring adhesive cartridge\u003c\/strong\u003e is a 22 ounce, two-component, high-solids epoxy anchoring adhesive for fastening threaded rod and rebar into concrete and masonry. This is an anchoring adhesive designed for structural anchoring, doweling, and rebar installation in cracked and uncracked base materials. Model Number: \u003cstrong\u003eET3G22-N\u003c\/strong\u003e.\u003c\/p\u003e\n    \u003cp\u003eWhat separates this product from a basic adhesive is where it can be used and the conditions it is built for. ET-3G is suitable for dry and water-saturated concrete, and it is rated for static and seismic loading conditions in cracked and uncracked concrete and masonry. If you are setting threaded rod, installing dowels, or anchoring rebar where code-driven performance matters, those details are the whole story, not just extra specs.\u003c\/p\u003e\n    \u003cp\u003eThe 1:1 epoxy formula is made for controlled installation through a side-by-side cartridge and static mixing nozzle. Mixed color is teal, which gives installers a quick visual check that the material is blending properly as it dispenses. The non-sag consistency also matters in the field because it helps the adhesive stay where it belongs for horizontal, vertical, and overhead applications instead of slumping out of the hole.\u003c\/p\u003e\n    \u003cp\u003eWorking time is one of the more practical advantages here. At 70 degrees Fahrenheit, gel time is 50 minutes, which gives you enough open time to clean the hole, dispense properly, and set rod or bar without racing the clock. Cure time at that temperature is 24 hours, while colder base materials extend cure time significantly. On water-saturated concrete, cure times must be doubled, which is worth planning for before you start a job with inspection or load deadlines.\u003c\/p\u003e\n    \u003cp\u003eFor jobsite conditions, ET-3G has a substrate installation temperature range of 50 degrees Fahrenheit to 110 degrees Fahrenheit and an in-service temperature range of minus 40 degrees Fahrenheit to 150 degrees Fahrenheit. Storage temperature is 45 degrees Fahrenheit to 90 degrees Fahrenheit, and unopened cartridges carry a 24 month shelf life when stored in that range. That long shelf life is useful for contractors who keep anchoring materials on hand for maintenance, repair, punch-list work, and scheduled installs.\u003c\/p\u003e\n    \u003cp\u003eThis cartridge version is sized for dispensing with Simpson Strong-Tie EDT22S, EDTA22P, or EDTA22CKT tools, and it includes one EMN22i mixing nozzle plus one extension. That makes it a practical choice for installers who want cartridge convenience instead of stepping up to bulk kits and metered dispensing equipment. Simpson specifically calls for using only its approved mixing nozzles, which is not a throwaway note. With adhesive anchors, the right nozzle and correct mix are part of the system.\u003c\/p\u003e\n    \u003cp\u003eIn terms of tested performance, ET-3G has been evaluated to ICC-ES AC308, AC58, ACI 355.4, and applicable ASTM methods. Typical properties include 13,000 psi compressive yield strength after 7 days, 2,600 psi slant shear bond strength for hardened-to-hardened concrete at 2 days, and 2,900 psi at 14 days. Those numbers matter because they tell you this is not a general-purpose construction adhesive pretending to do anchor work. It is purpose-built anchoring epoxy.\u003c\/p\u003e\n    \u003cp\u003eThis product makes the most sense for concrete contractors, structural repair crews, commercial installers, DOT-related work, and serious remodelers who need a dependable concrete and masonry anchoring adhesive for threaded rod or rebar. If your job involves adhesive anchoring in concrete, masonry, or CMU and you want a cartridge system with long working time and cracked concrete capability, this is the right kind of product to be looking at.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails id=\"product-benefits\" class=\"acc\"\u003e\n  \u003csummary\u003e\u003ch2\u003eMade for Real Anchoring Work\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\"\u003e\n    \u003cdiv class=\"row\"\u003e\n      \u003cdiv class=\"img\"\u003e\n        \u003cimg src=\"https:\/\/ssttoolbox.widen.net\/content\/wwvj7ibcqv\/jpeg\/A_ET-3G22-N_ProdPho_Pho_Prod_ET-3G-EpxoyAdhesive-22oz_C0.jpeg?position=c\u0026amp;color=ffffffff\u0026amp;u=cjmyin\" alt=\"Simpson Strong-Tie ET3G22-N epoxy anchoring adhesive cartridge shown as a 22 ounce side-by-side anchoring adhesive for concrete and masonry installation work\" class=\"tnblock-img\"\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"copy\"\u003e\n        \u003cp\u003eThe cartridge format is straightforward, portable, and practical for field anchoring work. You get a controlled 1:1 epoxy mix in a 22 ounce package that is easier to handle than bulk systems on smaller installs and repair work.\u003c\/p\u003e\n        \u003cul\u003e\n          \u003cli\u003e22 fluid ounce side-by-side cartridge\u003c\/li\u003e\n          \u003cli\u003eIncludes one EMN22i mixing nozzle and one extension\u003c\/li\u003e\n          \u003cli\u003eTeal mixed color helps verify proper material blend during dispensing\u003c\/li\u003e\n        \u003c\/ul\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails id=\"product-benefits\" class=\"acc flip\"\u003e\n  \u003csummary\u003e\u003ch2\u003eHandles Demanding Concrete Jobs\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\"\u003e\n    \u003cdiv class=\"row\"\u003e\n      \u003cdiv class=\"img\"\u003e\n        \u003cimg src=\"https:\/\/ssttoolbox.widen.net\/content\/ltwkt93szl\/jpeg\/A_ET-3G_InstPho_Pho_Inst_ET-3G-EpoxyAdhesive-BulkInstallation-Rebar-Concrete_C0.jpeg?position=c\u0026amp;color=ffffffff\u0026amp;u=cjmyin\" alt=\"Simpson Strong-Tie ET3G22-N epoxy anchoring adhesive product line used for rebar installation in concrete on a jobsite with workers placing anchors in a large slab\" class=\"tnblock-img\"\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"copy\"\u003e\n        \u003cp\u003eThis epoxy anchoring adhesive is built for more than light-duty patch work. It is intended for threaded rod anchoring and rebar doweling into concrete and CMU, including cracked conditions and seismic applications.\u003c\/p\u003e\n        \u003cul\u003e\n          \u003cli\u003eSuitable for static and seismic loading conditions\u003c\/li\u003e\n          \u003cli\u003eWorks in cracked and uncracked concrete and masonry\u003c\/li\u003e\n          \u003cli\u003eCan be used in horizontal, vertical, and overhead applications\u003c\/li\u003e\n        \u003c\/ul\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails id=\"product-benefits\" class=\"acc\"\u003e\n  \u003csummary\u003e\u003ch2\u003eWorks in Concrete and CMU\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\"\u003e\n    \u003cdiv class=\"row\"\u003e\n      \u003cdiv class=\"img\"\u003e\n        \u003cimg src=\"https:\/\/ssttoolbox.widen.net\/content\/ogtsgv0z3y\/jpeg\/A_OptiMesh_InstPho_Pho_Inst_Opti-MeshAdhesiveScreenTube-CMU_C0.jpeg?position=c\u0026amp;color=ffffffff\u0026amp;u=cjmyin\" alt=\"Simpson Strong-Tie ET3G22-N epoxy anchoring adhesive shown filling a screen tube in CMU block for anchored rod installation in masonry\" class=\"tnblock-img\"\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"copy\"\u003e\n        \u003cp\u003eIf your work moves between poured concrete and masonry, ET-3G gives you one anchoring adhesive system that covers both. That makes it easier to standardize materials across repair, retrofit, and anchoring jobs.\u003c\/p\u003e\n        \u003cul\u003e\n          \u003cli\u003eBase materials: concrete and masonry, cracked and uncracked\u003c\/li\u003e\n          \u003cli\u003eBase material conditions: dry and water-saturated\u003c\/li\u003e\n          \u003cli\u003eIdeal for threaded rod and rebar anchoring applications\u003c\/li\u003e\n        \u003c\/ul\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails id=\"product-whats-included\" class=\"acc\" open\u003e\n  \u003csummary\u003e\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\"\u003e\n    \u003cdiv class=\"tnincluded-wrapper\"\u003e\n      \u003cul\u003e\n        \u003cli\u003e(1) 22 oz. side-by-side cartridge\u003c\/li\u003e\n        \u003cli\u003e(1) EMN22i mixing nozzle\u003c\/li\u003e\n        \u003cli\u003e(1) extension\u003c\/li\u003e\n      \u003c\/ul\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails id=\"product-key-specifications\" class=\"acc\" open\u003e\n  \u003csummary\u003e\u003ch2\u003eKey Specifications\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\"\u003e\n    \u003ctable class=\"aplusspecs\"\u003e\n      \u003ctr\u003e\n        \u003cth\u003eNet Contents\u003c\/th\u003e\n        \u003ctd\u003e22 fl oz\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003cth\u003eMix Ratio \/ Type\u003c\/th\u003e\n        \u003ctd\u003e1:1 epoxy\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003cth\u003eBase Materials\u003c\/th\u003e\n        \u003ctd\u003eConcrete and masonry, cracked and uncracked\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003cth\u003eBase Material Conditions\u003c\/th\u003e\n        \u003ctd\u003eDry, water-saturated\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003cth\u003eAnchor Type\u003c\/th\u003e\n        \u003ctd\u003eThreaded rod or rebar\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003cth\u003eInstallation Temperature Range\u003c\/th\u003e\n        \u003ctd\u003e50°F to 110°F\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003cth\u003eIn-Service Temperature Range\u003c\/th\u003e\n        \u003ctd\u003e-40°F to 150°F\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003cth\u003eVOC\u003c\/th\u003e\n        \u003ctd\u003e3 g\/L\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails id=\"product-compatibility\" class=\"acc\"\u003e\n  \u003csummary\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\"\u003e\n    \u003cdiv class=\"compat-list\"\u003e\n      \u003cdiv class=\"compat-row\"\u003e\n        \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/specs.svg\" alt=\"specs\" class=\"icon-sm\"\u003e\n        \u003cdiv\u003e\n          \u003cstrong\u003eDispensing Tools\u003c\/strong\u003e\n          \u003cdiv class=\"compat-detail\"\u003eCompatible with Simpson Strong-Tie EDT22S, EDTA22P, and EDTA22CKT dispensing tools.\u003c\/div\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"compat-row\"\u003e\n        \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/tool-free-change.svg\" alt=\"tool-free-change\" class=\"icon-sm\"\u003e\n        \u003cdiv\u003e\n          \u003cstrong\u003eMixing Nozzle\u003c\/strong\u003e\n          \u003cdiv class=\"compat-detail\"\u003eUses the Simpson Strong-Tie EMN22i mixing nozzle. Simpson specifies using only approved Simpson Strong-Tie mixing nozzles for proper performance.\u003c\/div\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"compat-row\"\u003e\n        \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/material.svg\" alt=\"material\" class=\"icon-sm\"\u003e\n        \u003cdiv\u003e\n          \u003cstrong\u003eAnchor Materials\u003c\/strong\u003e\n          \u003cdiv class=\"compat-detail\"\u003eDesigned for anchoring threaded rod and rebar into concrete, masonry, and CMU.\u003c\/div\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails id=\"product-applications-uses\" class=\"acc\"\u003e\n  \u003csummary\u003e\u003ch2\u003eBuilt For\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\"\u003e\n    \u003cdiv class=\"tags\"\u003e\n      \u003cspan class=\"tag\"\u003eConstruction\u003c\/span\u003e\n      \u003cspan class=\"tag\"\u003eConcrete Work\u003c\/span\u003e\n      \u003cspan class=\"tag\"\u003eMasonry\u003c\/span\u003e\n      \u003cspan class=\"tag\"\u003eStructural Repair\u003c\/span\u003e\n      \u003cspan class=\"tag\"\u003eRebar Doweling\u003c\/span\u003e\n      \u003cspan class=\"tag\"\u003eThreaded Rod Anchoring\u003c\/span\u003e\n      \u003cspan class=\"tag\"\u003eGeneral Contracting\u003c\/span\u003e\n      \u003cspan class=\"tag\"\u003eCommercial Installation\u003c\/span\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails id=\"product-pro-tips\" class=\"acc\"\u003e\n  \u003csummary\u003e\u003ch2\u003ePro Tip\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\"\u003e\n    \u003cdiv class=\"tip-row\"\u003e\n      \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/specs.svg\" alt=\"specs\" class=\"icon-lg\"\u003e\n      \u003cp class=\"tip-text\"\u003eIf the cartridge has been sitting cold, warm it in a uniformly heated space before you start. ET-3G flows and mixes more consistently that way, and you avoid fighting thick material when you are trying to fill holes cleanly.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails id=\"product-warranty\" class=\"acc\"\u003e\n  \u003csummary\u003e\u003ch2\u003eWarranty \u0026amp; Support\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\"\u003e\n    \u003cdiv class=\"warranty-row\"\u003e\n      \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/warranty.svg\" alt=\"warranty\" class=\"icon-sm\"\u003e\n      \u003cdiv class=\"warranty-text\"\u003e\n        No warranty is listed for this product in the provided product data.\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails id=\"product-tool-nut-take\" class=\"acc\"\u003e\n  \u003csummary\u003e\u003ch2\u003eTool Nut's Take\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\"\u003e\n    \u003cdiv class=\"eyebrow\"\u003eTool Nut's Take\u003c\/div\u003e\n    \u003ch3\u003eSimpson Strong-Tie ET3G22-N epoxy anchoring adhesive is the serious stuff\u003c\/h3\u003e\n    \u003cp\u003eIf you need an anchoring adhesive for rebar or threaded rod in concrete or masonry, this is the kind of cartridge you buy when the job actually matters.\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eWho it's for:\u003c\/strong\u003e Concrete contractors, structural repair crews, commercial installers, and advanced DIY users doing code-conscious anchoring work.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eWhy it stands out:\u003c\/strong\u003e Cracked concrete capability, seismic suitability, long working time, and a cartridge format that is easier to manage than bulk systems.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eWorth knowing:\u003c\/strong\u003e It is a system product, so use the right dispensing tool and approved mixing nozzle. Also, cure times stretch out in colder or water-saturated conditions, so plan the schedule before you set anchors.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails id=\"product-faqs\" class=\"acc\"\u003e\n  \u003csummary\u003e\u003ch2\u003eCommon Questions\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\"\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eCan this adhesive be used in cracked concrete?\u003c\/strong\u003e Yes. ET-3G is suitable for cracked and uncracked concrete and masonry under static and seismic loading conditions.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eWhat anchors is it designed for?\u003c\/strong\u003e It is designed for threaded rod and rebar anchoring and doweling applications.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eWhat temperature range can it be installed in?\u003c\/strong\u003e The substrate installation temperature range is 50°F to 110°F.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eHow long is the working time at 70°F?\u003c\/strong\u003e Gel time is about 50 minutes at 70°F, with a listed cure time of 24 hours under those conditions.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eWhat dispensing tools fit this cartridge?\u003c\/strong\u003e Simpson Strong-Tie lists the EDT22S, EDTA22P, and EDTA22CKT as compatible dispensing tools for the ET3G22-N cartridge.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\u003c\/section\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":43569892196400,"sku":"ET3G22-N","price":6.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4876\/8304\/files\/07a3ksfw69tn_80e2478f-0c61-4637-9205-fbdf40bd8ec6.jpg?v=1788570676"},{"product_id":"simpson-strong-tie-at-xp-12-5-oz-high-strength-acrylic-anchoring-adhesive-cartridge-w-nozzle-at-xp13-oixh3v","title":"Simpson Strong-Tie AT-XP 12.5-oz. High-Strength Acrylic Anchoring Adhesive Cartridge w\/ Nozzle (AT-XP13)","description":"\u003csection data-aplus\u003e\n  \u003cdetails id=\"product-features\" class=\"acc\" open\u003e\n    \u003csummary\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003c\/summary\u003e\n    \u003cdiv class=\"acc-body\"\u003e\n      \u003cdiv class=\"features\"\u003e\n        \u003cdiv class=\"card\"\u003e\n          \u003cdiv class=\"card-inside\"\u003e\n            \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/temperature-range.svg\" alt=\"temperature-range\" class=\"aplusicon\"\u003e\n          \u003c\/div\u003e\n          \u003cdiv\u003e\u003cstrong\u003eCold-Weather Cure\u003c\/strong\u003e\u003c\/div\u003e\n          \u003cdiv class=\"feature-card\"\u003eThis anchoring adhesive is built for jobs where standard products slow down in the cold. It dispenses in below-freezing conditions without warming the cartridge, which helps keep anchor installs moving when the weather is not cooperating.\u003c\/div\u003e\n        \u003c\/div\u003e\n        \u003cdiv class=\"card\"\u003e\n          \u003cdiv class=\"card-inside\"\u003e\n            \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/material.svg\" alt=\"material\" class=\"aplusicon\"\u003e\n          \u003c\/div\u003e\n          \u003cdiv\u003e\u003cstrong\u003eConcrete and Masonry Anchoring\u003c\/strong\u003e\u003c\/div\u003e\n          \u003cdiv class=\"feature-card\"\u003eThe Simpson Strong-Tie AT-XP 12.5-oz. High-Strength Acrylic Anchoring Adhesive Cartridge w\/ Nozzle is made for anchoring threaded rod and rebar into concrete and masonry. That makes it a practical choice for structural fastening, retrofits, and repair work where holding strength matters.\u003c\/div\u003e\n        \u003c\/div\u003e\n        \u003cdiv class=\"card\"\u003e\n          \u003cdiv class=\"card-inside\"\u003e\n            \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/compliance.svg\" alt=\"compliance\" class=\"aplusicon\"\u003e\n          \u003c\/div\u003e\n          \u003cdiv\u003e\u003cstrong\u003eCode-Tested Performance\u003c\/strong\u003e\u003c\/div\u003e\n          \u003cdiv class=\"feature-card\"\u003eIt is tested to recognized standards for anchoring in cracked and uncracked concrete and masonry, including static and seismic conditions. For the user, that means this is not a guesswork product when the application calls for documented performance.\u003c\/div\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/details\u003e\n\n  \u003cdetails id=\"product-overview\" class=\"acc\"\u003e\n    \u003csummary\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003c\/summary\u003e\n    \u003cdiv class=\"acc-body\" data-product-summary\u003e\n      \u003cp\u003eSimpson Strong-Tie AT-XP 12.5-oz. High-Strength Acrylic Anchoring Adhesive Cartridge w\/ Nozzle is a two-component acrylic anchoring adhesive for setting threaded rod and rebar into concrete and masonry. This is an anchoring adhesive designed for structural anchoring in concrete and masonry. Model Number: AT-XP13. If you need a fast-curing adhesive anchor that can keep working through cold installs and changing jobsite conditions, this is the kind of cartridge you reach for.\u003c\/p\u003e\n      \u003cp\u003eAT-XP uses a 10:1 mix ratio and comes in a 12.5 fluid ounce side-by-side cartridge. In practical terms, that gives you a cartridge format made for controlled dispensing and consistent mixing through the included nozzle. When mixed properly, the adhesive turns teal, which gives the installer a quick visual check that the material is blended correctly before it goes into the hole.\u003c\/p\u003e\n      \u003cp\u003eWhere this product separates itself is temperature flexibility. Simpson Strong-Tie rates it for substrate installation temperatures from 14 degrees Fahrenheit to 100 degrees Fahrenheit, and it dispenses in cold or warm environments without needing cartridge warming. That matters on jobs where you do not have time to baby the material or wait on weather. It is also rated for in-service temperatures from negative 40 degrees Fahrenheit to 180 degrees Fahrenheit, so once installed, it is built to handle a wide operating range.\u003c\/p\u003e\n      \u003cp\u003eThis acrylic adhesive is formulated for anchoring threaded rod and rebar into cracked and uncracked concrete as well as uncracked masonry. It is also suitable for static and seismic loading conditions where the application and design call for it. For contractors doing structural retrofit work, guardrail posts, sill plate anchoring, equipment fastening, or rebar doweling, that broader approval range is a real advantage because it opens up more legitimate use cases from one cartridge type.\u003c\/p\u003e\n      \u003cp\u003eJobsite practicality is a big part of the appeal here. AT-XP can be specified for dry and damp conditions, and Simpson Strong-Tie states that it is approved for installation with a vacuum-drill bit system without further hole cleaning when used in accordance with the applicable code report. That can save steps compared to anchor installations that demand more cleanup before adhesive placement. Less prep time means faster anchor installation when the system and report allow it.\u003c\/p\u003e\n      \u003cp\u003eOn the compliance side, this adhesive is tested in accordance with ICC-ES AC308 and AC58, with report references ER-263 and ER-281, along with ACI 355.4 and applicable ASTM test methods. It is also compliant with NSF\/ANSI Standard 61. Those are the details serious users look for when they need an anchoring adhesive with documented performance instead of a generic construction adhesive trying to do a structural job it was never meant for.\u003c\/p\u003e\n      \u003cp\u003eThe cartridge is manufactured in the USA using global materials. The included nozzle helps keep the product ready for use out of the package, and the format is familiar for pros already working with adhesive anchoring systems. This is not a general glue for random bonding tasks. It is purpose-built for fastening steel into mineral base materials where bond strength, hole conditions, and curing behavior all matter.\u003c\/p\u003e\n      \u003cp\u003eWho should buy it? Concrete contractors, structural retrofit crews, masons, general contractors, and serious remodelers doing code-driven anchoring work. If your job involves threaded rod, rebar dowels, cracked concrete, or cold-weather anchor installation, Simpson Strong-Tie AT-XP 12.5-oz. High-Strength Acrylic Anchoring Adhesive Cartridge w\/ Nozzle is a strong fit. If you just need a light-duty adhesive for basic repairs, this is more specialized than you need. But for real anchoring work, that specialization is exactly the point.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/details\u003e\n\n  \u003cdetails id=\"product-benefits\" class=\"acc\"\u003e\n    \u003csummary\u003e\u003ch2\u003eBuilt for Tough Install Conditions\u003c\/h2\u003e\u003c\/summary\u003e\n    \u003cdiv class=\"acc-body\"\u003e\n      \u003cdiv class=\"row\"\u003e\n        \u003cdiv class=\"img\"\u003e\n          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/10497947861286_2e8608662855.jpg\" alt=\"Simpson Strong-Tie AT-XP 12.5-oz. High-Strength Acrylic Anchoring Adhesive Cartridge w\/ Nozzle shown as a side-by-side cartridge for concrete and masonry anchoring on structural fastening jobs\" class=\"tnblock-img\"\u003e\n        \u003c\/div\u003e\n        \u003cdiv class=\"copy\"\u003e\n          \u003cp\u003eThis anchoring adhesive is made for real field conditions, not just ideal shop temperatures. It is a practical option when the schedule does not stop for cold weather.\u003c\/p\u003e\n          \u003cul\u003e\n            \u003cli\u003eSubstrate installation temperature range of 14 degrees Fahrenheit to 100 degrees Fahrenheit\u003c\/li\u003e\n            \u003cli\u003eDispenses in cold or warm environments with no need to warm the cartridge\u003c\/li\u003e\n            \u003cli\u003eFast cure helps keep anchor work moving when time matters\u003c\/li\u003e\n          \u003c\/ul\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/details\u003e\n\n  \u003cdetails id=\"product-benefits-2\" class=\"acc flip\"\u003e\n    \u003csummary\u003e\u003ch2\u003ePurpose-Built for Anchoring Rod and Rebar\u003c\/h2\u003e\u003c\/summary\u003e\n    \u003cdiv class=\"acc-body\"\u003e\n      \u003cdiv class=\"row\"\u003e\n        \u003cdiv class=\"img\"\u003e\n          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/10497947861286_2f5840bb8376.jpg\" alt=\"Simpson Strong-Tie AT-XP 12.5-oz. High-Strength Acrylic Anchoring Adhesive Cartridge w\/ Nozzle loaded in a dispensing tool for installing adhesive anchors in concrete and masonry\" class=\"tnblock-img\"\u003e\n        \u003c\/div\u003e\n        \u003cdiv class=\"copy\"\u003e\n          \u003cp\u003eAT-XP is not a catch-all adhesive. It is specifically formulated for anchoring threaded rod and rebar where bond strength and approved use conditions matter.\u003c\/p\u003e\n          \u003cul\u003e\n            \u003cli\u003eFor threaded rod and rebar anchoring in cracked and uncracked concrete\u003c\/li\u003e\n            \u003cli\u003eAlso suitable for uncracked masonry applications\u003c\/li\u003e\n            \u003cli\u003eSuitable for static and seismic loading conditions where specified\u003c\/li\u003e\n          \u003c\/ul\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/details\u003e\n\n  \u003cdetails id=\"product-whats-included\" class=\"acc\" open\u003e\n    \u003csummary\u003e\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\u003c\/summary\u003e\n    \u003cdiv class=\"acc-body\"\u003e\n      \u003cdiv class=\"tnincluded-wrapper\"\u003e\n        \u003cul\u003e\n          \u003cli\u003e(1) Simpson Strong-Tie AT-XP13 12.5 fl. oz. acrylic anchoring adhesive cartridge\u003c\/li\u003e\n          \u003cli\u003e(1) Mixing nozzle\u003c\/li\u003e\n        \u003c\/ul\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/details\u003e\n\n  \u003cdetails id=\"product-key-specifications\" class=\"acc\" open\u003e\n    \u003csummary\u003e\u003ch2\u003eKey Specifications\u003c\/h2\u003e\u003c\/summary\u003e\n    \u003cdiv class=\"acc-body\"\u003e\n      \u003ctable class=\"aplusspecs\"\u003e\n        \u003ctr\u003e\n          \u003cth\u003eAdhesive Type\u003c\/th\u003e\n          \u003ctd\u003eAcrylic-based high-strength anchoring adhesive\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003cth\u003eVolume\u003c\/th\u003e\n          \u003ctd\u003e12.5 fl oz (370 mL)\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003cth\u003eMix Ratio\u003c\/th\u003e\n          \u003ctd\u003e10:1\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003cth\u003eCartridge Style\u003c\/th\u003e\n          \u003ctd\u003eSide-by-side cartridge\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003cth\u003eInstallation Temperature Range\u003c\/th\u003e\n          \u003ctd\u003e14°F to 100°F (-10°C to 38°C)\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003cth\u003eIn-Service Temperature Range\u003c\/th\u003e\n          \u003ctd\u003e-40°F to 180°F (-40°C to 82°C)\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003cth\u003eApproved Base Materials\u003c\/th\u003e\n          \u003ctd\u003eCracked and uncracked concrete; uncracked masonry\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003cth\u003eMade In\u003c\/th\u003e\n          \u003ctd\u003eUSA using global materials\u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/table\u003e\n    \u003c\/div\u003e\n  \u003c\/details\u003e\n\n  \u003cdetails id=\"product-compatibility\" class=\"acc\"\u003e\n    \u003csummary\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003c\/summary\u003e\n    \u003cdiv class=\"acc-body\"\u003e\n      \u003cdiv class=\"compat-list\"\u003e\n        \u003cdiv class=\"compat-row\"\u003e\n          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/material.svg\" alt=\"material\" class=\"icon-sm\"\u003e\n          \u003cdiv\u003e\n            \u003cstrong\u003eAnchor Materials\u003c\/strong\u003e\n            \u003cdiv class=\"compat-detail\"\u003eFormulated for anchoring threaded rod and rebar.\u003c\/div\u003e\n          \u003c\/div\u003e\n        \u003c\/div\u003e\n        \u003cdiv class=\"compat-row\"\u003e\n          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/material.svg\" alt=\"material\" class=\"icon-sm\"\u003e\n          \u003cdiv\u003e\n            \u003cstrong\u003eBase Materials\u003c\/strong\u003e\n            \u003cdiv class=\"compat-detail\"\u003eSuitable for cracked and uncracked concrete and for uncracked masonry.\u003c\/div\u003e\n          \u003c\/div\u003e\n        \u003c\/div\u003e\n        \u003cdiv class=\"compat-row\"\u003e\n          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/vacuum-compatibility.svg\" alt=\"vacuum-compatibility\" class=\"icon-sm\"\u003e\n          \u003cdiv\u003e\n            \u003cstrong\u003eHole Preparation System\u003c\/strong\u003e\n            \u003cdiv class=\"compat-detail\"\u003eApproved for installation with a vacuum-drill bit system without further hole cleaning where permitted by ER-263.\u003c\/div\u003e\n          \u003c\/div\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/details\u003e\n\n  \u003cdetails id=\"product-applications-uses\" class=\"acc\"\u003e\n    \u003csummary\u003e\u003ch2\u003eBuilt For\u003c\/h2\u003e\u003c\/summary\u003e\n    \u003cdiv class=\"acc-body\"\u003e\n      \u003cdiv class=\"tags\"\u003e\n        \u003cspan class=\"tag\"\u003eConcrete anchoring\u003c\/span\u003e\n        \u003cspan class=\"tag\"\u003eMasonry anchoring\u003c\/span\u003e\n        \u003cspan class=\"tag\"\u003eThreaded rod installation\u003c\/span\u003e\n        \u003cspan class=\"tag\"\u003eRebar doweling\u003c\/span\u003e\n        \u003cspan class=\"tag\"\u003eStructural retrofit work\u003c\/span\u003e\n        \u003cspan class=\"tag\"\u003eGeneral Contracting\u003c\/span\u003e\n        \u003cspan class=\"tag\"\u003eMasonry\u003c\/span\u003e\n        \u003cspan class=\"tag\"\u003eRemodeling\u003c\/span\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/details\u003e\n\n  \u003cdetails id=\"product-pro-tips\" class=\"acc\"\u003e\n    \u003csummary\u003e\u003ch2\u003ePro Tip\u003c\/h2\u003e\u003c\/summary\u003e\n    \u003cdiv class=\"acc-body\"\u003e\n      \u003cdiv class=\"tip-row\"\u003e\n        \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/specs.svg\" alt=\"specs\" class=\"icon-lg\"\u003e\n        \u003cp class=\"tip-text\"\u003eWatch the adhesive color as you start dispensing. Simpson Strong-Tie states AT-XP should be teal when mixed properly, so if the color is off, keep purging until the mix is consistent before filling the hole.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/details\u003e\n\n  \u003cdetails id=\"product-tool-nut-take\" class=\"acc\"\u003e\n    \u003csummary\u003e\u003ch2\u003eTool Nut's Take\u003c\/h2\u003e\u003c\/summary\u003e\n    \u003cdiv class=\"acc-body\"\u003e\n      \u003cdiv class=\"eyebrow\"\u003eTool Nut's Take\u003c\/div\u003e\n      \u003ch3\u003eSimpson Strong-Tie AT-XP 12.5-oz. High-Strength Acrylic Anchoring Adhesive Cartridge w\/ Nozzle Gets the Job Done When Conditions Are Not Ideal\u003c\/h3\u003e\n      \u003cp\u003eThis is the kind of anchoring adhesive you buy because the install actually matters and the weather is not going to wait for you.\u003c\/p\u003e\n      \u003cul\u003e\n        \u003cli\u003e\n\u003cstrong\u003eWho it's for:\u003c\/strong\u003e Contractors and serious users setting threaded rod or rebar in concrete or masonry, especially on repair, retrofit, and structural fastening work.\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003eWhy it stands out:\u003c\/strong\u003e Cold-weather dispensing without warming the cartridge, a wide service temperature range, and documented performance for cracked concrete applications give it real jobsite value.\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003eWorth knowing:\u003c\/strong\u003e This is a specialized anchoring product, not a general-purpose glue. Use it where an approved adhesive anchor system is called for and pay attention to the installation requirements for the specific application.\u003c\/li\u003e\n      \u003c\/ul\u003e\n    \u003c\/div\u003e\n  \u003c\/details\u003e\n\n  \u003cdetails id=\"product-faqs\" class=\"acc\"\u003e\n    \u003csummary\u003e\u003ch2\u003eCommon Questions\u003c\/h2\u003e\u003c\/summary\u003e\n    \u003cdiv class=\"acc-body\"\u003e\n      \u003cul\u003e\n        \u003cli\u003e\n\u003cstrong\u003eWhat is this product used for?\u003c\/strong\u003e It is used to anchor threaded rod and rebar into cracked and uncracked concrete and into uncracked masonry.\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003eCan it be used in cold weather?\u003c\/strong\u003e Yes. Simpson Strong-Tie states it dispenses easily in cold or warm environments and can be installed at substrate temperatures from 14°F to 100°F.\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003eIs it suitable for seismic applications?\u003c\/strong\u003e Yes. The product data states it is suitable for static and seismic loading conditions in the approved base materials.\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003eWhat temperature range can it handle after installation?\u003c\/strong\u003e Its in-service temperature range is rated from -40°F to 180°F.\u003c\/li\u003e\n      \u003c\/ul\u003e\n    \u003c\/div\u003e\n  \u003c\/details\u003e\n\u003c\/section\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":43569896128560,"sku":"AT-XP13","price":8.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4876\/8304\/files\/ll4u1oqrprvm_dc00545a-9d7e-4b75-b292-db00bfb21d0b.jpg?v=1788570712"},{"product_id":"simpson-strong-tie-at-xp-30-oz-high-strength-acrylic-anchoring-adhesive-cartridge-w-nozzle-at-xp30-691evq","title":"Simpson Strong-Tie AT-XP 30-oz. High-Strength Acrylic Anchoring Adhesive Cartridge w\/ Nozzle (AT-XP30)","description":"\u003csection data-aplus\u003e\n\u003cdetails id=\"product-features\" class=\"acc\" open\u003e\n  \u003csummary\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\"\u003e\n    \u003cdiv class=\"features\"\u003e\n      \u003cdiv class=\"card\"\u003e\n        \u003cdiv class=\"card-inside\"\u003e\n          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/temperature-range.svg\" alt=\"temperature-range\" class=\"aplusicon\"\u003e\n        \u003c\/div\u003e\n        \u003cdiv\u003e\u003cstrong\u003eCold-Weather Ready\u003c\/strong\u003e\u003c\/div\u003e\n        \u003cdiv class=\"feature-card\"\u003eThis anchoring adhesive dispenses in cold, warm, and below-freezing conditions without needing to warm the cartridge first. That saves setup time when the job cannot wait for better weather.\u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"card\"\u003e\n        \u003cdiv class=\"card-inside\"\u003e\n          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/material.svg\" alt=\"material\" class=\"aplusicon\"\u003e\n        \u003c\/div\u003e\n        \u003cdiv\u003e\u003cstrong\u003eBuilt for Structural Anchoring\u003c\/strong\u003e\u003c\/div\u003e\n        \u003cdiv class=\"feature-card\"\u003eThe Simpson Strong-Tie AT-XP 30-oz. High-Strength Acrylic Anchoring Adhesive Cartridge w\/ Nozzle (AT-XP30) is made for anchoring threaded rod and rebar into concrete and masonry. It is suitable for cracked and uncracked concrete plus uncracked masonry under static and seismic loading conditions.\u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"card\"\u003e\n        \u003cdiv class=\"card-inside\"\u003e\n          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/certifications.svg\" alt=\"certifications\" class=\"aplusicon\"\u003e\n        \u003c\/div\u003e\n        \u003cdiv\u003e\u003cstrong\u003eCode-Tested Performance\u003c\/strong\u003e\u003c\/div\u003e\n        \u003cdiv class=\"feature-card\"\u003eTested to ICC-ES AC308, AC58, ACI 355.4, applicable ASTM methods, and compliant with NSF\/ANSI Standard 61. If you need an anchoring adhesive with documented performance, this is the kind of data you want behind it.\u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails id=\"product-overview\" class=\"acc\" open\u003e\n  \u003csummary\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\" data-product-summary\u003e\n    \u003cp\u003eSimpson Strong-Tie AT-XP 30-oz. High-Strength Acrylic Anchoring Adhesive Cartridge w\/ Nozzle (AT-XP30) is a two-component acrylic anchoring adhesive cartridge for setting threaded rod and rebar into concrete and masonry. This is a high-strength acrylic anchoring adhesive designed for anchoring threaded rod and rebar into concrete and masonry. Model Number: AT-XP30. It is a strong fit for contractors, concrete crews, remodelers, and serious DIY users who need a fast-curing adhesive anchor system that can keep moving in rough jobsite conditions.\u003c\/p\u003e\n    \u003cp\u003eWhat matters here is where this product works and how flexible it is on the job. AT-XP is formulated for cracked and uncracked concrete and for uncracked masonry, and it is suitable for static and seismic loading conditions. That gives you a wider range of approved anchoring applications than a general-purpose construction adhesive. If you are installing threaded rod or rebar where performance and code-backed testing matter, this is the right category of product.\u003c\/p\u003e\n    \u003cp\u003eCold weather is where this acrylic anchoring adhesive really separates itself. Simpson states that it dispenses easily in cold or warm environments and even in below-freezing temperatures without needing to warm the cartridge. For anyone working outdoors, in garages, on winter retrofit jobs, or on fast-moving service work, that means less waiting around and less babysitting materials just to get a cartridge ready to run.\u003c\/p\u003e\n    \u003cp\u003eAT-XP is a 10:1 ratio, 30-ounce side-by-side cartridge system. That larger cartridge size makes sense for repetitive anchoring work or larger runs where you do not want to burn time changing cartridges constantly. When mixed properly, the adhesive turns teal, which gives the installer a clear visual check that the material is blended correctly before it goes into the hole.\u003c\/p\u003e\n    \u003cp\u003eThe service-temperature range is another practical advantage. Simpson lists dry and damp in-service conditions from minus 40 degrees Fahrenheit to 180 degrees Fahrenheit, along with a substrate installation temperature range from 14 degrees Fahrenheit to 100 degrees Fahrenheit. In plain terms, this anchoring adhesive is built to cover a wide range of field conditions without forcing you into a narrow install window.\u003c\/p\u003e\n    \u003cp\u003eFrom a compliance standpoint, this product is backed by serious testing. It is tested in accordance with ICC-ES AC308 and AC58, ACI 355.4, and applicable ASTM test methods, and it is compliant with NSF\/ANSI Standard 61. It is also approved for installation with a vacuum-drill bit system without further hole cleaning when used as covered in Simpson's code report ER-263. That can help streamline installation workflow on approved jobs where dust control and hole prep efficiency matter.\u003c\/p\u003e\n    \u003cp\u003eWho should buy it? If you are doing structural anchoring, post-installed rebar work, threaded rod installs, or masonry anchoring where temperature swings and jobsite speed are real concerns, this is the kind of product worth paying attention to. If you just need a basic adhesive for light-duty bonding, this is more product than you need. But if you need a fast-curing concrete anchoring adhesive with tested performance and broad jobsite usability, AT-XP is built for exactly that work.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails id=\"product-benefits\" class=\"acc\"\u003e\n  \u003csummary\u003e\u003ch2\u003eFast Setups in Tough Weather\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\"\u003e\n    \u003cdiv class=\"row\"\u003e\n      \u003cdiv class=\"img\"\u003e\n        \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/10497947894054_e222ca8c6ff4.jpg\" alt=\"Simpson Strong-Tie AT-XP 30-oz. High-Strength Acrylic Anchoring Adhesive Cartridge w\/ Nozzle (AT-XP30) installed in a dispensing tool for concrete and masonry anchoring work on the jobsite\" class=\"tnblock-img\"\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"copy\"\u003e\n        \u003cp\u003eThis concrete anchoring adhesive is built for real jobsite conditions, not perfect shop temperatures. If you are setting anchors in winter or working in changing weather, the ability to dispense without warming the cartridge first is a real time-saver.\u003c\/p\u003e\n        \u003cul\u003e\n          \u003cli\u003eDispenses in cold, warm, and below-freezing environments\u003c\/li\u003e\n          \u003cli\u003eFast cure helps when turnaround time matters\u003c\/li\u003e\n        \u003c\/ul\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails id=\"product-benefits-2\" class=\"acc flip\"\u003e\n  \u003csummary\u003e\u003ch2\u003eDesigned for Anchoring, Not General Bonding\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\"\u003e\n    \u003cdiv class=\"row\"\u003e\n      \u003cdiv class=\"img\"\u003e\n        \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/10497947894054_f0ca6e8865b0.jpg\" alt=\"Simpson Strong-Tie AT-XP 30-oz. High-Strength Acrylic Anchoring Adhesive Cartridge w\/ Nozzle (AT-XP30) front and back view showing 30 ounce side-by-side cartridge for threaded rod and rebar anchoring\" class=\"tnblock-img\"\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"copy\"\u003e\n        \u003cp\u003eAT-XP is made specifically for setting threaded rod and rebar into concrete and masonry. That means the spec sheet, code testing, and load-related performance are aimed at anchor installations where failure is not an option.\u003c\/p\u003e\n        \u003cul\u003e\n          \u003cli\u003e10:1 ratio two-component acrylic anchoring adhesive\u003c\/li\u003e\n          \u003cli\u003eSuitable for cracked and uncracked concrete plus uncracked masonry\u003c\/li\u003e\n        \u003c\/ul\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails id=\"product-benefits-3\" class=\"acc\"\u003e\n  \u003csummary\u003e\u003ch2\u003eEasy Visual Check During Installation\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\"\u003e\n    \u003cdiv class=\"row\"\u003e\n      \u003cdiv class=\"img\"\u003e\n        \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/10497947894054_dd650f2845ad.jpg\" alt=\"Simpson Strong-Tie AT-XP 30-oz. High-Strength Acrylic Anchoring Adhesive Cartridge w\/ Nozzle (AT-XP30) product shot showing dual cartridge design for anchoring adhesive applications\" class=\"tnblock-img\"\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"copy\"\u003e\n        \u003cp\u003eSmall details matter with anchoring products. Simpson notes that properly mixed AT-XP turns teal, giving you a straightforward visual cue that the material is blended correctly before installation.\u003c\/p\u003e\n        \u003cul\u003e\n          \u003cli\u003eMixed adhesive color is teal when properly blended\u003c\/li\u003e\n          \u003cli\u003e30 fl. oz. cartridge size supports larger anchoring runs\u003c\/li\u003e\n        \u003c\/ul\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails id=\"product-whats-included\" class=\"acc\" open\u003e\n  \u003csummary\u003e\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\"\u003e\n    \u003cdiv class=\"tnincluded-wrapper\"\u003e\n      \u003cul\u003e\n        \u003cli\u003e(1) Simpson Strong-Tie AT-XP 30-oz. High-Strength Acrylic Anchoring Adhesive cartridge\u003c\/li\u003e\n        \u003cli\u003e(1) Nozzle\u003c\/li\u003e\n      \u003c\/ul\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails id=\"product-key-specifications\" class=\"acc\" open\u003e\n  \u003csummary\u003e\u003ch2\u003eKey Specifications\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\"\u003e\n    \u003ctable class=\"aplusspecs\"\u003e\n      \u003ctr\u003e\n        \u003cth\u003eAdhesive Type\u003c\/th\u003e\n        \u003ctd\u003eAcrylic-based high-strength anchoring adhesive\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003cth\u003eCartridge Size\u003c\/th\u003e\n        \u003ctd\u003e30 fl. oz. \/ 887 mL\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003cth\u003eMix Ratio\u003c\/th\u003e\n        \u003ctd\u003e10:1\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003cth\u003eCartridge Style\u003c\/th\u003e\n        \u003ctd\u003eSide-by-side cartridge\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003cth\u003eSubstrate Installation Temperature Range\u003c\/th\u003e\n        \u003ctd\u003e14°F to 100°F (-10°C to 38°C)\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003cth\u003eIn-Service Temperature Range\u003c\/th\u003e\n        \u003ctd\u003e-40°F to 180°F (-40°C to 82°C)\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003cth\u003eSuitable Base Materials\u003c\/th\u003e\n        \u003ctd\u003eCracked and uncracked concrete, uncracked masonry\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003cth\u003eMade In\u003c\/th\u003e\n        \u003ctd\u003eUSA using global materials\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails id=\"product-applications-uses\" class=\"acc\"\u003e\n  \u003csummary\u003e\u003ch2\u003eBuilt For\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\"\u003e\n    \u003cdiv class=\"tags\"\u003e\n      \u003cspan class=\"tag\"\u003eConcrete Anchoring\u003c\/span\u003e\n      \u003cspan class=\"tag\"\u003eMasonry Anchoring\u003c\/span\u003e\n      \u003cspan class=\"tag\"\u003eThreaded Rod Installation\u003c\/span\u003e\n      \u003cspan class=\"tag\"\u003eRebar Doweling\u003c\/span\u003e\n      \u003cspan class=\"tag\"\u003eConstruction\u003c\/span\u003e\n      \u003cspan class=\"tag\"\u003eGeneral Contracting\u003c\/span\u003e\n      \u003cspan class=\"tag\"\u003eRemodeling\u003c\/span\u003e\n      \u003cspan class=\"tag\"\u003eSeismic and Static Load Applications\u003c\/span\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails id=\"product-pro-tips\" class=\"acc\"\u003e\n  \u003csummary\u003e\u003ch2\u003ePro Tip\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\"\u003e\n    \u003cdiv class=\"tip-row\"\u003e\n      \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/specs.svg\" alt=\"specs\" class=\"icon-lg\"\u003e\n      \u003cp class=\"tip-text\"\u003eOn cold-weather anchor jobs, AT-XP lets you skip the step of warming the cartridge first, which helps keep the crew moving. Also watch for the proper teal mixed color before filling the hole so you know the two components are blending correctly.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails id=\"product-tool-nut-take\" class=\"acc\"\u003e\n  \u003csummary\u003e\u003ch2\u003eTool Nut's Take\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\"\u003e\n    \u003cdiv class=\"eyebrow\"\u003eTool Nut's Take\u003c\/div\u003e\n    \u003ch3\u003eSimpson Strong-Tie AT-XP 30-oz. High-Strength Acrylic Anchoring Adhesive Cartridge w\/ Nozzle (AT-XP30) is the one to grab when weather and schedule are both working against you.\u003c\/h3\u003e\n    \u003cp\u003eThis is a serious anchoring product for concrete and masonry work, especially when you need cold-weather usability and code-backed performance.\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eWho it's for:\u003c\/strong\u003e Contractors and installers setting threaded rod or rebar in concrete or masonry, especially on structural, retrofit, or outdoor jobs.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eWhy it stands out:\u003c\/strong\u003e It dispenses in below-freezing conditions without warming the cartridge, covers a wide service-temperature range, and has the testing behind it that pros look for.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eWorth knowing:\u003c\/strong\u003e This is an anchoring adhesive, not a general-purpose glue. Buy it for engineered anchor work, and make sure your installation method matches the applicable code report.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails id=\"product-faqs\" class=\"acc\"\u003e\n  \u003csummary\u003e\u003ch2\u003eCommon Questions\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\"\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eWhat is this product used for?\u003c\/strong\u003e It is used for anchoring threaded rod and rebar into cracked and uncracked concrete and into uncracked masonry.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eCan it be used in cold weather?\u003c\/strong\u003e Yes. Simpson states that AT-XP dispenses easily in cold or warm environments and in below-freezing temperatures without needing to warm the cartridge.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eWhat temperature range can it handle in service?\u003c\/strong\u003e It can be specified for dry and damp conditions when in-service temperatures range from -40°F to 180°F.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eIs it tested for code-related anchoring applications?\u003c\/strong\u003e Yes. It is tested to ICC-ES AC308, AC58, ACI 355.4, and applicable ASTM methods, and it is compliant with NSF\/ANSI Standard 61.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\u003c\/section\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":43569896194096,"sku":"AT-XP30","price":11.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4876\/8304\/files\/43q6isbyfvd3_8bdee497-94fc-438d-8e04-98560dd2756c.jpg?v=1788570713"},{"product_id":"simpson-strong-tie-8-5-oz-high-strength-epoxy-adhesive-w-1-nozzle-and-extension-set3g10-k89f12","title":"Simpson Strong-Tie 8.5-oz. High-Strength Epoxy Adhesive w\/ 1 Nozzle and Extension (SET3G10)","description":"\u003csection data-aplus\u003e\n\u003cdetails id=\"product-features\" class=\"acc\" open\u003e\n  \u003csummary\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\"\u003e\n    \u003cdiv class=\"features\"\u003e\n      \u003cdiv class=\"card\"\u003e\n        \u003cdiv class=\"card-inside\"\u003e\n          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/temperature-range.svg\" alt=\"temperature-range\" class=\"aplusicon\"\u003e\n        \u003c\/div\u003e\n        \u003cdiv\u003e\u003cstrong\u003eHandles Tough Conditions\u003c\/strong\u003e\u003c\/div\u003e\n        \u003cdiv class=\"feature-card\"\u003eThis Simpson Strong-Tie SET3G10 epoxy anchoring adhesive is built for dry, water-saturated, water-filled, and submerged holes. That gives you one anchoring adhesive for a wider range of concrete job conditions instead of switching products.\u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"card\"\u003e\n        \u003cdiv class=\"card-inside\"\u003e\n          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/material.svg\" alt=\"material\" class=\"aplusicon\"\u003e\n        \u003c\/div\u003e\n        \u003cdiv\u003e\u003cstrong\u003eHigh-Strength Bonding\u003c\/strong\u003e\u003c\/div\u003e\n        \u003cdiv class=\"feature-card\"\u003eDesigned for threaded rod and rebar in cracked and uncracked concrete, SET-3G delivers the bond strength needed for demanding anchoring work, including seismic applications where ductile solutions matter.\u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"card\"\u003e\n        \u003cdiv class=\"card-inside\"\u003e\n          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/specs.svg\" alt=\"specs\" class=\"aplusicon\"\u003e\n        \u003c\/div\u003e\n        \u003cdiv\u003e\u003cstrong\u003eReady-To-Use Kit\u003c\/strong\u003e\u003c\/div\u003e\n        \u003cdiv class=\"feature-card\"\u003eModel SET3G10 comes as an 8.5-ounce coaxial cartridge and includes one EMN22i mixing nozzle plus one extension. That means less scrambling for small parts when it is time to install anchors.\u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails id=\"product-overview\" class=\"acc\" open\u003e\n  \u003csummary\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\" data-product-summary\u003e\n    \u003cp\u003eThe Simpson Strong-Tie SET3G10 High-Strength Epoxy Adhesive is a two-component anchoring adhesive for installing threaded rod and rebar in concrete. This is an epoxy anchoring adhesive designed for structural anchoring in cracked and uncracked concrete under a wide range of jobsite conditions. Model Number SET3G10 packages the formula in an 8.5-ounce coaxial cartridge and includes one EMN22i mixing nozzle and one extension, so you have the key dispensing pieces right in the box.\u003c\/p\u003e\n    \u003cp\u003eWhat makes this product matter is where it can be used and how much guesswork it removes. SET-3G is specified for dry, water-saturated, water-filled, and submerged conditions, and it is approved for installation in downward, horizontal, upwardly inclined, and overhead orientations. For crews doing retrofit anchoring, rebar doweling, or threaded rod installs, that kind of versatility means fewer work stoppages when site conditions are less than ideal.\u003c\/p\u003e\n    \u003cp\u003eThe formula is a 1:1 epoxy with a gray mixed color, and it is built for concrete and masonry applications involving cracked and uncracked base materials. Simpson Strong-Tie also calls out improved sustained load performance at elevated temperature, which matters when the anchor design has to hold up beyond just day-one installation. In-service temperature range is rated from -40 degrees Fahrenheit to 176 degrees Fahrenheit, so the adhesive is suited for a broad range of environmental exposure conditions after cure.\u003c\/p\u003e\n    \u003cp\u003eFrom an engineering and compliance standpoint, SET-3G is recognized per ICC-ES AC308 for post-installed rebar development and splice length design provisions, and it has been tested in accordance with ICC-ES AC308, ACI 355.4, and applicable ASTM test methods. That is the kind of paperwork and testing background pros want when the anchor is part of a serious structural detail, not just a light-duty attachment.\u003c\/p\u003e\n    \u003cp\u003eJobsite practicality is another strong point. Simpson states the product is approved for installation with multiple vacuum-drill bit systems without further hole cleaning on approved systems, and it can also be installed using a conventional wire brush blow-brush-blow cleaning method. The low-odor formulation is also a plus when you are working indoors or in tighter spaces where strong chemical smell becomes a problem fast.\u003c\/p\u003e\n    \u003cp\u003eFor installation, base-material temperatures need to be 40 degrees Fahrenheit to 100 degrees Fahrenheit. Simpson recommends conditioning the adhesive to 70 degrees Fahrenheit to 80 degrees Fahrenheit for best results, and notes that mixed material can harden in the dispensing nozzle within 30 minutes at 70 degrees Fahrenheit. In plain terms, once you start dispensing, keep moving and do not waste time with a partially used nozzle sitting around.\u003c\/p\u003e\n    \u003cp\u003eCompatibility is straightforward for this cartridge size. SET3G10 is used with the Simpson Strong-Tie CDT10S dispensing tool and EMN22i mixing nozzle. If you already run Simpson adhesive anchoring gear, that keeps your setup simple. If you are buying in fresh, make sure you are matching the cartridge to the correct dispensing tool instead of assuming all adhesive guns fit all cartridges.\u003c\/p\u003e\n    \u003cp\u003eWho should buy this? Concrete contractors, structural retrofit crews, commercial installers, and serious remodelers doing code-driven anchoring work will get the most out of it. If you need a small-format structural epoxy anchoring adhesive for threaded rod or rebar and want one that covers wet and submerged conditions without stepping down in performance, the Simpson Strong-Tie SET3G10 is the kind of cartridge that earns space in the truck.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails id=\"product-benefits-1\" class=\"acc\"\u003e\n  \u003csummary\u003e\u003ch2\u003eBuilt for Real Anchoring Conditions\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\"\u003e\n    \u003cdiv class=\"row\"\u003e\n      \u003cdiv class=\"img\"\u003e\n        \u003cimg src=\"https:\/\/ssttoolbox.widen.net\/content\/jmpjjgmyb9\/jpeg\/A_EDTA22P-SET-3G22_InstPho_Pho_Inst_SET-3GEpoxy-Install-Concrete_C0.jpeg?position=c\u0026amp;color=ffffffff\u0026amp;u=cjmyin\" alt=\"Simpson Strong-Tie SET3G10 epoxy anchoring adhesive being dispensed into a drilled concrete hole on a jobsite for threaded rod or rebar installation\" class=\"tnblock-img\"\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"copy\"\u003e\n        \u003cp\u003eThis is where a structural epoxy anchoring adhesive has to prove itself. SET-3G is made for anchoring threaded rod and rebar into concrete, and it is qualified for cracked and uncracked concrete applications.\u003c\/p\u003e\n        \u003cul\u003e\n          \u003cli\u003eDesigned for threaded rod anchor and rebar dowel installations\u003c\/li\u003e\n          \u003cli\u003eQualified for downward, horizontal, upwardly inclined, and overhead installations\u003c\/li\u003e\n          \u003cli\u003eSuitable for structures assigned to Seismic Design Categories A through F\u003c\/li\u003e\n        \u003c\/ul\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails id=\"product-benefits-2\" class=\"acc flip\"\u003e\n  \u003csummary\u003e\u003ch2\u003eWorks in Wet and Submerged Holes\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\"\u003e\n    \u003cdiv class=\"row\"\u003e\n      \u003cdiv class=\"img\"\u003e\n        \u003cimg src=\"https:\/\/ssttoolbox.widen.net\/content\/uytqcekhhb\/jpeg\/A_SET-3G_InstPho_Pho_Inst_SET-3G-Epxoy-SubmergedInstallation_C0.jpeg?position=c\u0026amp;color=ffffffff\u0026amp;u=cjmyin\" alt=\"Simpson Strong-Tie SET3G10 epoxy anchoring adhesive used in a submerged concrete hole during anchor installation\" class=\"tnblock-img\"\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"copy\"\u003e\n        \u003cp\u003eIf you are working in less-than-perfect conditions, this adhesive gives you more flexibility than many standard anchoring products. Simpson specifically states there is no performance difference between water-saturated concrete, water-filled holes, or submerged concrete when correct installation procedures are followed.\u003c\/p\u003e\n        \u003cul\u003e\n          \u003cli\u003eBase material conditions: dry, water-saturated, water-filled, and submerged\u003c\/li\u003e\n          \u003cli\u003eIn-service temperature range: -40 degrees Fahrenheit to 176 degrees Fahrenheit\u003c\/li\u003e\n          \u003cli\u003eApproved for potable water use\u003c\/li\u003e\n        \u003c\/ul\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails id=\"product-benefits-3\" class=\"acc\"\u003e\n  \u003csummary\u003e\u003ch2\u003eSmall Cartridge, Structural Job\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\"\u003e\n    \u003cdiv class=\"row\"\u003e\n      \u003cdiv class=\"img\"\u003e\n        \u003cimg src=\"https:\/\/ssttoolbox.widen.net\/content\/os4mvd16j1\/jpeg\/A_SET3G10_ProdPho_RI_Prod_SET-3G-EpoxyAdhesive-10oz_C0.jpeg?position=c\u0026amp;color=ffffffff\u0026amp;u=cjmyin\" alt=\"Simpson Strong-Tie SET3G10 epoxy anchoring adhesive 8.5 ounce cartridge shown as the packaged product for concrete anchoring work\" class=\"tnblock-img\"\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"copy\"\u003e\n        \u003cp\u003eThe 8.5-ounce cartridge size makes sense when you need structural-grade anchoring adhesive without stepping up to a larger cartridge system. It is easier to manage for punch-list work, smaller installs, and jobs where waste matters.\u003c\/p\u003e\n        \u003cul\u003e\n          \u003cli\u003e8.5-ounce coaxial cartridge\u003c\/li\u003e\n          \u003cli\u003e1:1 epoxy formula with gray mixed color\u003c\/li\u003e\n          \u003cli\u003eLow-odor formulation for more comfortable indoor use\u003c\/li\u003e\n        \u003c\/ul\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails id=\"product-whats-included\" class=\"acc\" open\u003e\n  \u003csummary\u003e\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\"\u003e\n    \u003cdiv class=\"tnincluded-wrapper\"\u003e\n      \u003cul\u003e\n        \u003cli\u003e(1) 8.5-ounce coaxial cartridge\u003c\/li\u003e\n        \u003cli\u003e(1) EMN22i mixing nozzle\u003c\/li\u003e\n        \u003cli\u003e(1) Extension\u003c\/li\u003e\n      \u003c\/ul\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails id=\"product-key-specifications\" class=\"acc\" open\u003e\n  \u003csummary\u003e\u003ch2\u003eKey Specifications\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\"\u003e\n    \u003ctable class=\"aplusspecs\"\u003e\n      \u003ctr\u003e\n        \u003cth\u003eMix Ratio \/ Type\u003c\/th\u003e\n        \u003ctd\u003e1:1 epoxy\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003cth\u003eCartridge Size\u003c\/th\u003e\n        \u003ctd\u003e8.5 oz\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003cth\u003eMixed Color\u003c\/th\u003e\n        \u003ctd\u003eGray\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003cth\u003eBase Materials\u003c\/th\u003e\n        \u003ctd\u003eConcrete and masonry, cracked and uncracked\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003cth\u003eAnchor Type\u003c\/th\u003e\n        \u003ctd\u003eThreaded rod or rebar\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003cth\u003eInstallation Temperature\u003c\/th\u003e\n        \u003ctd\u003e40 degrees Fahrenheit to 100 degrees Fahrenheit\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003cth\u003eIn-Service Temperature Range\u003c\/th\u003e\n        \u003ctd\u003e-40 degrees Fahrenheit to 176 degrees Fahrenheit\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003cth\u003eShelf Life\u003c\/th\u003e\n        \u003ctd\u003e24 months\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003cth\u003eVOC\u003c\/th\u003e\n        \u003ctd\u003e2 g\/L\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003cth\u003eMade In\u003c\/th\u003e\n        \u003ctd\u003eUSA using global materials\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails id=\"product-compatibility\" class=\"acc\"\u003e\n  \u003csummary\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\"\u003e\n    \u003cdiv class=\"compat-list\"\u003e\n      \u003cdiv class=\"compat-row\"\u003e\n        \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/toolbox.svg\" alt=\"toolbox\" class=\"aplusicon\"\u003e\n        \u003cdiv\u003e\n          \u003cstrong\u003eDispensing Tool\u003c\/strong\u003e\n          \u003cdiv class=\"compat-detail\"\u003eCompatible with the Simpson Strong-Tie CDT10S dispensing tool for the SET3G10 cartridge size.\u003c\/div\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"compat-row\"\u003e\n        \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/accessories-included.svg\" alt=\"accessories-included\" class=\"aplusicon\"\u003e\n        \u003cdiv\u003e\n          \u003cstrong\u003eMixing Nozzle\u003c\/strong\u003e\n          \u003cdiv class=\"compat-detail\"\u003eUses the Simpson Strong-Tie EMN22i mixing nozzle. One nozzle is included in the package.\u003c\/div\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails id=\"product-applications-uses\" class=\"acc\"\u003e\n  \u003csummary\u003e\u003ch2\u003eBuilt For\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\"\u003e\n    \u003cdiv class=\"tags\"\u003e\n      \u003cspan class=\"tag\"\u003eConcrete Anchoring\u003c\/span\u003e\n      \u003cspan class=\"tag\"\u003eStructural Retrofit\u003c\/span\u003e\n      \u003cspan class=\"tag\"\u003eRebar Doweling\u003c\/span\u003e\n      \u003cspan class=\"tag\"\u003eThreaded Rod Installation\u003c\/span\u003e\n      \u003cspan class=\"tag\"\u003eSeismic Work\u003c\/span\u003e\n      \u003cspan class=\"tag\"\u003eCommercial Construction\u003c\/span\u003e\n      \u003cspan class=\"tag\"\u003eGeneral Contracting\u003c\/span\u003e\n      \u003cspan class=\"tag\"\u003eRemodeling\u003c\/span\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails id=\"product-pro-tips\" class=\"acc\"\u003e\n  \u003csummary\u003e\u003ch2\u003ePro Tip\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\"\u003e\n    \u003cdiv class=\"tip-row\"\u003e\n      \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/specs.svg\" alt=\"specs\" class=\"aplusicon\"\u003e\n      \u003cp class=\"tip-text\"\u003eIf the cartridge has been sitting in a cold truck, warm it up to Simpson's recommended 70 degrees Fahrenheit to 80 degrees Fahrenheit before you start. You will get smoother dispensing, better mixing through the nozzle, and less fighting the gun on the first few anchors.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails id=\"product-tool-nut-take\" class=\"acc\"\u003e\n  \u003csummary\u003e\u003ch2\u003eTool Nut's Take\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\"\u003e\n    \u003cdiv class=\"eyebrow\"\u003eTool Nut's Take\u003c\/div\u003e\n    \u003ch3\u003eSimpson Strong-Tie SET3G10 High-Strength Epoxy Adhesive for serious anchoring work\u003c\/h3\u003e\n    \u003cp\u003eIf you need a small cartridge epoxy for threaded rod or rebar that still checks the right structural boxes, this one is easy to like.\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eWho it's for:\u003c\/strong\u003e Pros doing concrete anchoring, retrofit work, rebar doweling, and code-driven installs where conditions may be dry, wet, or fully submerged.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eWhy it stands out:\u003c\/strong\u003e It covers a wide range of base material conditions, carries strong code recognition, and comes with the nozzle and extension you need to get started.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eWorth knowing:\u003c\/strong\u003e This is the 8.5-ounce cartridge, so it is great for smaller runs and targeted installs. Just make sure you are pairing it with the correct Simpson dispensing tool.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails id=\"product-faqs\" class=\"acc\"\u003e\n  \u003csummary\u003e\u003ch2\u003eCommon Questions\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\"\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eWhat is this adhesive used for?\u003c\/strong\u003e It is used for anchoring threaded rod and rebar in cracked and uncracked concrete, including rebar dowel installations.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eCan it be used in wet holes?\u003c\/strong\u003e Yes. Simpson states it is suitable for dry, water-saturated, water-filled, and submerged concrete conditions when proper installation procedures are followed.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eWhat temperature range can it be installed in?\u003c\/strong\u003e The substrate installation temperature range is 40 degrees Fahrenheit to 100 degrees Fahrenheit.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eWhat dispensing tool fits SET3G10?\u003c\/strong\u003e Simpson lists the CDT10S dispensing tool and EMN22i mixing nozzle for this cartridge size.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\u003c\/section\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":43569897701424,"sku":"SET3G10","price":7.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4876\/8304\/files\/u127zzo9t1jc_35700a39-04c0-4673-aabe-7ea91b0bf107.jpg?v=1788570738"},{"product_id":"simpson-strong-tie-22-oz-high-strength-epoxy-adhesive-w-nozzle-and-extension-set3g22-n-i81nu4","title":"Simpson Strong-Tie 22-oz. High-Strength Epoxy Adhesive w\/ Nozzle and Extension (SET3G22-N)","description":"\u003csection data-aplus\u003e\n\u003cdetails id=\"product-features\" class=\"acc\" open\u003e\n  \u003csummary\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\"\u003e\n    \u003cdiv class=\"features\"\u003e\n      \u003cdiv class=\"card\"\u003e\n        \u003cdiv class=\"card-inside\"\u003e\n          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/temperature-range.svg\" alt=\"temperature-range\" class=\"aplusicon\"\u003e\n        \u003c\/div\u003e\n        \u003cdiv\u003e\u003cstrong\u003eHandles Wet Conditions\u003c\/strong\u003e\u003c\/div\u003e\n        \u003cdiv class=\"feature-card\"\u003eThis adhesive is built for dry, water-saturated, water-filled, and submerged concrete conditions. That gives you more flexibility on real jobs where perfectly dry holes are not always an option.\u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"card\"\u003e\n        \u003cdiv class=\"card-inside\"\u003e\n          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/material.svg\" alt=\"material\" class=\"aplusicon\"\u003e\n        \u003c\/div\u003e\n        \u003cdiv\u003e\u003cstrong\u003eMade for Anchoring\u003c\/strong\u003e\u003c\/div\u003e\n        \u003cdiv class=\"feature-card\"\u003eThe Simpson Strong-Tie SET3G22-N SET-3G 22 oz Anchoring Adhesive is designed for threaded rod and rebar in cracked and uncracked concrete. That matters when you need a code-listed anchoring adhesive for structural work, not a general-purpose epoxy.\u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"card\"\u003e\n        \u003cdiv class=\"card-inside\"\u003e\n          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/certifications.svg\" alt=\"certifications\" class=\"aplusicon\"\u003e\n        \u003c\/div\u003e\n        \u003cdiv\u003e\u003cstrong\u003eHigh-Seismic Ready\u003c\/strong\u003e\u003c\/div\u003e\n        \u003cdiv class=\"feature-card\"\u003eSET-3G is recognized for post-installed rebar development and splice length design provisions and is qualified for structures in Seismic Design Categories A through F. In plain terms, it is built for demanding anchoring work where bond strength matters.\u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails id=\"product-overview\" class=\"acc\"\u003e\n  \u003csummary\u003e\u003ch2\u003eOverview\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\" data-product-summary\u003e\n    \u003cp\u003eThe \u003cstrong\u003eSimpson Strong-Tie SET3G22-N SET-3G 22 oz Anchoring Adhesive\u003c\/strong\u003e is a two-component 1:1 epoxy anchoring adhesive for installing threaded rod and rebar into concrete and masonry. This is an \u003cstrong\u003eanchoring adhesive\u003c\/strong\u003e designed for \u003cstrong\u003estructural anchoring and rebar installation in cracked and uncracked concrete\u003c\/strong\u003e. Model Number: \u003cstrong\u003eSET3G22-N\u003c\/strong\u003e. If you need a structural epoxy for fastening into concrete under a wide range of jobsite conditions, this is the kind of product you buy because it is purpose-built for anchoring, not patching or light-duty bonding.\u003c\/p\u003e\n    \u003cp\u003eWhat sets SET-3G apart is how broad its working range is. Simpson Strong-Tie rates it for dry, water-saturated, water-filled, and even submerged concrete conditions, with in-service temperatures from \u003cstrong\u003e-40 degrees Fahrenheit to 176 degrees Fahrenheit\u003c\/strong\u003e. That gives contractors more flexibility when site conditions are messy, cold, wet, or hard to control. It is also recognized per \u003cstrong\u003eICC-ES AC308\u003c\/strong\u003e for post-installed rebar development and splice length design provisions, so it is aimed squarely at engineered anchoring applications where code compliance and predictable bond performance are part of the job.\u003c\/p\u003e\n    \u003cp\u003eThe 22 oz side-by-side cartridge format is a practical middle ground for field work. It gives you more material than a small cartridge without jumping all the way to the larger 56 oz size that usually makes more sense for higher-volume work. Each cartridge includes one \u003cstrong\u003eEMN22i mixing nozzle\u003c\/strong\u003e and one \u003cstrong\u003eextension\u003c\/strong\u003e, which helps get material where it needs to go in deeper holes and tighter access points. Proper mixing matters with anchoring epoxy, and Simpson specifically calls for using its approved mixing nozzles to maintain performance.\u003c\/p\u003e\n    \u003cp\u003eSET-3G is designed for threaded rod anchor and rebar dowel installations in cracked and uncracked concrete under a wide variety of environmental conditions. It can be installed in downward, horizontal, and upwardly inclined orientations, including overhead work. That makes it useful for everything from retrofit anchoring and holdown installs to rebar doweling and general structural fastening where access is not always ideal.\u003c\/p\u003e\n    \u003cp\u003eOn the performance side, Simpson Strong-Tie positions SET-3G for superior bond strength at elevated temperatures and better sustained load performance. That is a big deal on jobs where anchors stay loaded long term or where the assembly may see higher service temperatures. It is also a low-odor formulation, which is a nice real-world benefit when you are working indoors, in occupied spaces, or in confined areas where strong chemical smell gets old fast.\u003c\/p\u003e\n    \u003cp\u003eJobsite practicality is another strong point. SET-3G is approved for installation with multiple vacuum-drill bit systems without further hole cleaning in approved applications, and it also supports conventional wire brush hole cleaning for standard anchoring workflows. If your crew already has an established hole prep process, that flexibility helps. Just keep an eye on temperature: base-material installation temperature needs to be \u003cstrong\u003e40 degrees Fahrenheit to 100 degrees Fahrenheit\u003c\/strong\u003e, and mixed material can harden in the nozzle in about \u003cstrong\u003e30 minutes at 70 degrees Fahrenheit\u003c\/strong\u003e, so you do not want to leave a used nozzle sitting around and expect it to stay open.\u003c\/p\u003e\n    \u003cp\u003eCompatibility is straightforward. The SET3G22-N cartridge works with Simpson Strong-Tie \u003cstrong\u003eEDT22S\u003c\/strong\u003e, \u003cstrong\u003eEDTA22P\u003c\/strong\u003e, and \u003cstrong\u003eEDTA22CKT\u003c\/strong\u003e dispensing tools and uses the \u003cstrong\u003eEMN22i mixing nozzle\u003c\/strong\u003e. That matters because structural anchoring products are only as reliable as the full installation system. Using the correct dispensing tool and nozzle is part of getting the mix right and meeting the product's intended performance.\u003c\/p\u003e\n    \u003cp\u003eThis anchoring adhesive makes the most sense for concrete contractors, general contractors, structural retrofit crews, masons, and serious remodelers doing engineered anchoring work. If you are setting threaded rod, installing rebar dowels, or working on jobs where wet holes, overhead placement, or seismic requirements are in play, the Simpson Strong-Tie SET3G22-N SET-3G 22 oz Anchoring Adhesive is built for that kind of work.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails id=\"product-benefits\" class=\"acc\"\u003e\n  \u003csummary\u003e\u003ch2\u003eBuilt for Real Concrete Conditions\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\"\u003e\n    \u003cdiv class=\"row\"\u003e\n      \u003cdiv class=\"img\"\u003e\n        \u003cimg src=\"https:\/\/ssttoolbox.widen.net\/content\/jmpjjgmyb9\/jpeg\/A_EDTA22P-SET-3G22_InstPho_Pho_Inst_SET-3GEpoxy-Install-Concrete_C0.jpeg?position=c\u0026amp;color=ffffffff\u0026amp;u=cjmyin\" alt=\"Simpson Strong-Tie SET3G22-N SET-3G 22 oz Anchoring Adhesive being dispensed into a drilled concrete hole on a jobsite wall for structural anchoring work\" class=\"tnblock-img\"\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"copy\"\u003e\n        \u003cp\u003eThis is the kind of concrete anchoring adhesive meant for field conditions, not perfect lab conditions. It is designed for threaded rod and rebar installs where consistent bond performance matters.\u003c\/p\u003e\n        \u003cul\u003e\n          \u003cli\u003eFor cracked and uncracked concrete and masonry\u003c\/li\u003e\n          \u003cli\u003eWorks in downward, horizontal, upwardly inclined, and overhead installations\u003c\/li\u003e\n          \u003cli\u003eLow-odor 1:1 epoxy formula with gray mixed color for visual confirmation\u003c\/li\u003e\n        \u003c\/ul\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails id=\"product-benefits-2\" class=\"acc flip\"\u003e\n  \u003csummary\u003e\u003ch2\u003eKeeps Working When the Hole Is Wet\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\"\u003e\n    \u003cdiv class=\"row\"\u003e\n      \u003cdiv class=\"img\"\u003e\n        \u003cimg src=\"https:\/\/ssttoolbox.widen.net\/content\/uytqcekhhb\/jpeg\/A_SET-3G_InstPho_Pho_Inst_SET-3G-Epxoy-SubmergedInstallation_C0.jpeg?position=c\u0026amp;color=ffffffff\u0026amp;u=cjmyin\" alt=\"Simpson Strong-Tie SET3G22-N SET-3G 22 oz Anchoring Adhesive injected into a submerged concrete hole during wet-condition anchor installation\" class=\"tnblock-img\"\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"copy\"\u003e\n        \u003cp\u003eWet holes are where a product like this earns its keep. SET-3G can be used in dry, water-saturated, water-filled, and submerged concrete when installed correctly, which helps on renovation, repair, and exterior jobs where moisture is part of the deal.\u003c\/p\u003e\n        \u003cul\u003e\n          \u003cli\u003eBase material conditions: dry, water-saturated, water-filled, and submerged\u003c\/li\u003e\n          \u003cli\u003eIn-service temperature range from -40 degrees Fahrenheit to 176 degrees Fahrenheit\u003c\/li\u003e\n          \u003cli\u003eFor water-saturated, water-filled, and submerged concrete, cure times should be doubled\u003c\/li\u003e\n        \u003c\/ul\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails id=\"product-benefits-3\" class=\"acc\"\u003e\n  \u003csummary\u003e\u003ch2\u003eFits Structural Retrofit Work\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\"\u003e\n    \u003cdiv class=\"row\"\u003e\n      \u003cdiv class=\"img\"\u003e\n        \u003cimg src=\"https:\/\/ssttoolbox.widen.net\/content\/95ywrzojwx\/jpeg\/A_RFB4X5-55-HDU-SET-3G_InstPho_RI_Instld_RetrofitBolt-ZincGrade55-Yellow-SET-3G-EpoxyAdhesive-Holdown_C0.jpeg?position=c\u0026amp;color=ffffffff\u0026amp;u=cjmyin\" alt=\"Simpson Strong-Tie SET3G22-N SET-3G 22 oz Anchoring Adhesive used for retrofit holdown anchoring at a framed wall over a concrete slab\" class=\"tnblock-img\"\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"copy\"\u003e\n        \u003cp\u003eWhen you are setting anchors for holdowns, rebar dowels, or retrofit connections, you want an epoxy that is actually intended for structural anchoring. SET-3G is qualified for demanding use, including high seismic applications.\u003c\/p\u003e\n        \u003cul\u003e\n          \u003cli\u003eQualified for structures assigned to Seismic Design Categories A through F\u003c\/li\u003e\n          \u003cli\u003eRecognized per ICC-ES AC308 for post-installed rebar development and splice length design\u003c\/li\u003e\n          \u003cli\u003eApproved for threaded rod anchor and rebar dowel installations\u003c\/li\u003e\n        \u003c\/ul\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails id=\"product-whats-included\" class=\"acc\" open\u003e\n  \u003csummary\u003e\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\"\u003e\n    \u003cdiv class=\"tnincluded-wrapper\"\u003e\n      \u003cul\u003e\n        \u003cli\u003e(1) Simpson Strong-Tie SET3G22-N 22 oz side-by-side epoxy cartridge\u003c\/li\u003e\n        \u003cli\u003e(1) EMN22i mixing nozzle\u003c\/li\u003e\n        \u003cli\u003e(1) Nozzle extension\u003c\/li\u003e\n      \u003c\/ul\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"included-note\"\u003e\n      \u003cp\u003eDispensing tool is sold separately.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails id=\"product-key-specifications\" class=\"acc\" open\u003e\n  \u003csummary\u003e\u003ch2\u003eKey Specifications\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\"\u003e\n    \u003ctable class=\"aplusspecs\"\u003e\n      \u003ctr\u003e\n        \u003cth\u003eNet Contents\u003c\/th\u003e\n        \u003ctd\u003e22 fl oz\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003cth\u003eMix Ratio\u003c\/th\u003e\n        \u003ctd\u003e1:1 epoxy\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003cth\u003eMixed Color\u003c\/th\u003e\n        \u003ctd\u003eGray\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003cth\u003eBase Materials\u003c\/th\u003e\n        \u003ctd\u003eConcrete and masonry, cracked and uncracked\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003cth\u003eAnchor Type\u003c\/th\u003e\n        \u003ctd\u003eThreaded rod or rebar\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003cth\u003eInstallation Temperature\u003c\/th\u003e\n        \u003ctd\u003e40 degrees Fahrenheit to 100 degrees Fahrenheit\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003cth\u003eIn-Service Temperature Range\u003c\/th\u003e\n        \u003ctd\u003e-40 degrees Fahrenheit to 176 degrees Fahrenheit\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003cth\u003eShelf Life\u003c\/th\u003e\n        \u003ctd\u003e24 months\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails id=\"product-compatibility\" class=\"acc\"\u003e\n  \u003csummary\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\"\u003e\n    \u003cdiv class=\"compat-list\"\u003e\n      \u003cdiv class=\"compat-row\"\u003e\n        \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/toolbox.svg\" alt=\"toolbox\" class=\"icon-sm\"\u003e\n        \u003cdiv\u003e\n          \u003cstrong\u003eDispensing Tools\u003c\/strong\u003e\n          \u003cdiv class=\"compat-detail\"\u003eCompatible with Simpson Strong-Tie EDT22S, EDTA22P, and EDTA22CKT dispensing tools.\u003c\/div\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"compat-row\"\u003e\n        \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/accessories-included.svg\" alt=\"accessories-included\" class=\"icon-sm\"\u003e\n        \u003cdiv\u003e\n          \u003cstrong\u003eMixing Nozzle\u003c\/strong\u003e\n          \u003cdiv class=\"compat-detail\"\u003eUses the Simpson Strong-Tie EMN22i mixing nozzle. One nozzle and one extension are included with this cartridge.\u003c\/div\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"compat-row\"\u003e\n        \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/material.svg\" alt=\"material\" class=\"icon-sm\"\u003e\n        \u003cdiv\u003e\n          \u003cstrong\u003eAnchor Materials\u003c\/strong\u003e\n          \u003cdiv class=\"compat-detail\"\u003eDesigned for installing threaded rod and rebar into concrete and masonry.\u003c\/div\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails id=\"product-applications-uses\" class=\"acc\"\u003e\n  \u003csummary\u003e\u003ch2\u003eBuilt For\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\"\u003e\n    \u003cdiv class=\"tags\"\u003e\n      \u003cspan class=\"tag\"\u003eConcrete Anchoring\u003c\/span\u003e\n      \u003cspan class=\"tag\"\u003eStructural Retrofit\u003c\/span\u003e\n      \u003cspan class=\"tag\"\u003eRebar Doweling\u003c\/span\u003e\n      \u003cspan class=\"tag\"\u003eSeismic Applications\u003c\/span\u003e\n      \u003cspan class=\"tag\"\u003eGeneral Contracting\u003c\/span\u003e\n      \u003cspan class=\"tag\"\u003eMasonry\u003c\/span\u003e\n      \u003cspan class=\"tag\"\u003eConstruction\u003c\/span\u003e\n      \u003cspan class=\"tag\"\u003eRemodeling\u003c\/span\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails id=\"product-pro-tips\" class=\"acc\"\u003e\n  \u003csummary\u003e\u003ch2\u003ePro Tip\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\"\u003e\n    \u003cdiv class=\"tip-row\"\u003e\n      \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/specs.svg\" alt=\"specs\" class=\"icon-lg\"\u003e\n      \u003cp class=\"tip-text\"\u003eIf you are installing in concrete below 70 degrees Fahrenheit, warm the cartridge to at least 70 degrees before use so it mixes and flows the way it should. Also plan for longer cure times in wet holes, because Simpson says cure times should be doubled for water-saturated, water-filled, and submerged concrete.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails id=\"product-warranty\" class=\"acc\"\u003e\n  \u003csummary\u003e\u003ch2\u003eWarranty \u0026amp; Support\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\"\u003e\n    \u003cdiv class=\"warranty-row\"\u003e\n      \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0933\/1582\/5958\/files\/warranty.svg\" alt=\"warranty\" class=\"icon-sm\"\u003e\n      \u003cdiv class=\"warranty-text\"\u003e\n        Warranty: None listed.\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails id=\"product-tool-nut-take\" class=\"acc\"\u003e\n  \u003csummary\u003e\u003ch2\u003eTool Nut's Take\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\"\u003e\n    \u003cdiv class=\"eyebrow\"\u003eTool Nut's Take\u003c\/div\u003e\n    \u003ch3\u003eSimpson Strong-Tie SET3G22-N SET-3G 22 oz Anchoring Adhesive for serious anchor work\u003c\/h3\u003e\n    \u003cp\u003eThis is the one you reach for when the job calls for real anchoring performance, not a generic epoxy trying to do structural work.\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eWho it's for:\u003c\/strong\u003e Contractors and advanced DIY users installing threaded rod or rebar in concrete, especially on retrofit, structural, and wet-condition jobs.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eWhy it stands out:\u003c\/strong\u003e It covers a wide range of jobsite conditions, works in wet and submerged holes, and backs that up with code recognition for demanding anchoring applications.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eWorth knowing:\u003c\/strong\u003e This cartridge includes the nozzle and extension, but you still need the correct dispensing tool. Follow the approved nozzle and installation process, because that is part of how this product earns its reputation.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails id=\"product-faqs\" class=\"acc\"\u003e\n  \u003csummary\u003e\u003ch2\u003eCommon Questions\u003c\/h2\u003e\u003c\/summary\u003e\n  \u003cdiv class=\"acc-body\"\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eCan this anchoring adhesive be used in wet holes?\u003c\/strong\u003e Yes. SET-3G is rated for dry, water-saturated, water-filled, and submerged concrete conditions when installed correctly.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eWhat can it anchor?\u003c\/strong\u003e It is designed for threaded rod and rebar installations in concrete and masonry.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eWhat dispensing tools fit the SET3G22-N cartridge?\u003c\/strong\u003e Simpson Strong-Tie lists the EDT22S, EDTA22P, and EDTA22CKT as compatible dispensing tools for this 22 oz cartridge.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eWhat installation temperature range does it require?\u003c\/strong\u003e Base material temperature must be between 40 degrees Fahrenheit and 100 degrees Fahrenheit at the time of installation.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\u003c\/section\u003e","brand":"Simpson Strong-Tie","offers":[{"title":"Default Title","offer_id":43569899733040,"sku":"SET3G22-N","price":14.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/4876\/8304\/files\/0ap6fa646l7k_6e363366-d189-4782-9d21-7b0bfde83776.jpg?v=1788570775"}],"url":"https:\/\/toolnutus.com\/collections\/adhesive-applicator.oembed","provider":"InoPrints","version":"1.0","type":"link"}